PROVN OF AMENITY ROOM FOR LABOURS AT SUPPLY COY PROVN OF DRAINAGE LINE WITH CULVERT NEAR GATE NO 16 PROVN OF GUARD ROOM NEAR MT AREA OF 66 ENGR REGT AND EXECUTION OF CERTAIN REVENUE AND MINOR WORKS AT NASIRABAD

Amount

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in hard/dense soil, complete, all as specified & directed.

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft/disintigrated rock, complete, all as specified & directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil, complete, all as specified & directed.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point, complete, all as specified & directed.

M&L for PCC 1:4:8, type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete, all as specified & directed.

M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete, all as specified & directed.

All as per description of serial item No. 6 here-in-before but 8mm dia bar.

All as per description of serial item No. 6 here-in-before but 6 to 10mm dia in stirrups, spacers and binders.

S&F steel window / ventilator glazed and gauged (combination) with side hung / top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as shown in drg No. CEBZ /TD / 14/11 Sheet No. 1/7 to 7/7 complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundations including rafts, footings, foundation beams, bases for columns, mass concrete and the like, complete, all as specified & directed. .

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete, complete, all as specified & directed.

M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in columns, pillars, piers, posts, struts and the like, complete, all as specified & directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete, complete, all as specified & directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate in lintels over 1.5m clear span, seismic and other similar bands, lintel bands, plinth bands, roof bands and the like, complete, all as specified & directed.

Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete, complete, all as specified & directed.

M&L for reinforced cement concrete M-25 grade (Design mix) using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like, complete, all as specified & directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete, complete, all as specified & directed.

Formwork to edges of concrete flats, roofs, floors etc and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces, complete, all as specified & directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6, complete, all as specified & directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls , built in cement mortar 1:4, complete, all as specified & directed.

Supply only integral water proofing compound (ISI marked).

M&L for APP modified polymeric water proofing membrane, 2 mm thick having centre core not less than 100 micron high molecular high density polythelene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.2 Kg/Sqm over bitumen primer conforming to IS-3384 @ 0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @ 1.2 Kg/Sqm over APP membrane with all overlaps, complete, all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:4 on roof top surfaces, mixed with water proofing compound as per manufacturer's instruction, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for 40mm thick (average consolidated thickness) type B0 using 12.5mm graded stone aggregate as in padding even and smooth without using extra cement with existing slope with 'V' shaped grooves 6mm wide and 10mm deep @ 1.2m interval or part thereof, both ways on top of padding and filled with mastic bitumen of 1:1 proportion, complete, all as specified & directed.

Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick masonry surfaces of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint, complete, all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 1 mm thick finished coat of white wall care putty, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash, complete, all as specified & directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of ceiling & applying two coats of cement base paint of approved shade/tint, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of walls & applying three coats of white wash, complete, all as specified & directed.

M&L for glazed ceramic tiles (coloured) 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete, all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B0 using 12.5 mm graded stone aggregates, finished fair and even as in sub base for laying floor finishes, complete, all as specified & directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 ,complete, all as specified and directed.

All as per description of serial item No. 39 above but as in skirting over & including 10mm thick screed plaster in cement & sand mortar 1:4 ,complete, all as specified and directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick as in shelving/window cills or steps in single piece laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 including necessary bull nosing, fixed to wall and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick & 550x550mm size, laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

M&L for 75 mm thick PCC (1:4:8), type D2 using 40 mm graded crushed stone aggregate as in sub base of floor, surface finished fair and even,complete, all as specified & directed.

M&L for machine cut Kota stone slab 20 to 25mm thick on vertical surfaces such as dado, skirting, cills etc. laid over & including screed bed or bedding layer of 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

S & F Pressed steel frames of size 125 x 60x1.25 mm thick mm for doors with one or more rebates including filling with PCC 1:3:6, type B0 using 12.5mm graded stone aggregates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified & approved by Engr-In-Charge.

S&F second class hard wood (Hollock/Bonsum/Sal) factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F factory made 35mm thick glazed and skeleton shutters (three panels) made of second class hard wood, open rebated and prepared to receive glass, gauze etc (witht sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete, all as specified & directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications.

S&F factory made solid panel PVC moulded door shutter with particle board core, 28 to 30mm thick (styles) with 2 raised panel design with 2 mm thick moulded PVC sheet on front face & 2mm thick plain colour PVC frame sheet on back face and fixing in frame at site, complete, all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked), complete, all as specified & directed.

S&F extruded aluminium alloy handle, 150mm size, cast type, anodized (ISI marked), complete, all as specified & directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F butt hinges of size 100 mm medium weight, cold rolled mild steel ISI marked, complete, all as specified & directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of enamel paint of approved tint over a coat of pink primer, complete, all as specified & directed.

S&F factory made steel ventilator factory made made out of MS hollow section 79 mm x39 mm x 1.6 mm thick frame with double shutter (glazed & wire gauzed shutter) made out of 'Z' section using flush butt welding and tennon riveting, all as per IS 1038/83, dobby hinges shall be provided to both shutters, locking arrangements, 25mm aluminium knobs to shutter, aluminium hook & eye, 10mm MS square bars in grill, 04 Nos lugs welded to frame 'Z' section handle, 100 mm including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4, type B1 including two coat of enamel paint over a coat of zinc crome/red oxide primer, complete, all as specified & directed. Note:- Wire mesh and sheet glass shall be measured and paid separately. with top hung shutter including hinges, steel peg stay, handle complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete, all as specified & directed.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete, all as specified & directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of enamel paint of approved tint over a coat of zinc chrome primer, complete, all as specified & directed.

S&F aluminium handle, 100mm size, cast type, anodized (ISI marked) complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors , complete, all as specified & directed. Note :- Excavation & earthwork shall be measured & paid for separately.

All as per description of serial item No. 61 above but 75mm bore pipe.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints and fixed to walls with MS stack clamps of FI 50x3 mm including fittings, complete, all as specified & directed. Note :- Excavation & earthwork shall be measured & paid for separately.

S&F 110 mm bore PVC (SWR) junction single (single ‘T’), equal or unequal with oval access door.

S&F 110mm bore PVC (SWR) bend, any radius with access door.

S&F 75mm bore PVC (SWR) bend, any radius with access door.

S&F 110 mm bore PVC (SWR) vent cowl.

S&F in repairs PVC (SWR) Gully trap 125/110mm, setting and jointing with solvent cement, complete, all as specified & directed.

S&F PVC (SWR) floor trap plain with PTMT grating including jointing with solvent cement, diameter of outlet 75mm, complete, all as specified & directed.

S&F vitreous china wash hand basin, white, flat back of size 580mm x 450mm with including 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete, all as specified & directed.

S&F 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete, all as specified & directed.

S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc and, making good to floor, complete all as specified & directed.

S&F PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete, all as specified & directed.

S&F vitreous china urinal, flat back, half stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete, all as specified & directed.

S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides, complete, all as specified & directed.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 1000 litre capacity, triple layered, hoisted and fixed in position including disconnecting & taking down the existing water tank, complete, all as specified in SSR Part - I and as directed. Note :- (i) The unit rate quoted by tenderer shall be deemed to insulate water tank with GI pipe medium grade 10cm long projected inside and outside of tank with bore suitable for inlet and outlet, GI pipe 20mm bore medium grade projecting 10cm inside and outside of the tank for over flow, GI pipe 20mm bore medium grade projected 10cm inside and outside of tank for vent & mosquito cover for vent/overflow pipe.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms), complete, all as specified and directed.

M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified & directed.

All as per serial item No. 79 here-in-above but of 20 mm bore pipe.

All as per serial item No. 79 here-in-above but of 15 mm bore pipe.

All as per serial item No. 79 here-in-above but of 20 mm bore pipe, laid in trenches.

S&F 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipecomplete, all as specified & directed. .

S&F 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipecomplete, all as specified & directed. .

Cutting existing steel tubing for addition and alteration, screwing the existing steel tubing in position and insertion of required size of GI fitting (ie Union, nipple, reducing tee) for branch connection of internal dia 25/20mm, complete, all as directed.

S&F 15 mm bore bib tap, cast copper alloy, fancy type,chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete, all as specified & directed.

S&F 15mm bore angle stop valve fancy type of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete, all as specified & directed.

S&F 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete, all as specified & directed.

S&F brass chromium plated shower rose 125 mm size with swivel joint including fixing to steel pipe of 15mm bore or union, complete, all as specified & directed.

S&F tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete, all as specified & directed.

S&F soap dish holder (Cat Part No ACN-1131N of make - Jaquar or equivalent of Marc/Parryware/Somany/Parko/Gem/Prayag) complete all as specified & as directed.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface, complete, all as specified & directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 2 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:1).

S&F mild steel framed work such as grills, gratings, guard bars, barred iron doors, cooler stand, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290), including welding etc. complete all as specified & as directed.

M&L for factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe, complete, all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

Add or deduct for each 25mm girth or part over or under 30cm

M&L for 50mm thick sand stone slab in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc not exc 2m in length, punched dressed on face and along exposed edges, self faced on the other side and set and pointed in cement mortar 1:4 complete.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in surface channels, drains & copings, rounded or chamfered on edges all as specified & directed.

Supply & laying FRP septic tank package type waste water treatment system (PWTS) Model No. PWTS-AM-180-01 of Sintex or equivalent approved make of size 1490 mm dia and 1615 mm height including necessary inlet & outlet pipe designed to carry sewage and salvage water, with upflow filter including media including necessary excavation, PCC (1:4:8) below foundation bed, vent pipe, inlet and outlet connection pipe upto 2.00m length etc, complete all as specified and directed. Make :- Sintex or Equivalent MES approved make.

M & L for soakage wells including excavation in any type of soil, foundation in PCC (1:4:8), walls of honey combed fly ash brick masonry with top ring of RCC 1:1.5:3 type A-1 concrete including intercepting chamber and screen chamber made of fly ash brick masonry in CM (1:6), RCC cover slab in1:1.5:3 type A-1 & SFRC MH cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia & 2.0m effective depth all as per drg No. CEBZ/TD/78 /2011 sh No 1/2 & 2/2 complete all as specified and directed.

Surface excavation in any type of soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

M & L for Providing precast cement concrete type C1 1:3:6 (20 mm graded aggregate) in kerbs stone, window or door cills lintels bressumers, steps quoin blocks etc. of any section with plane fair faces including chamfers, weatherings, throating and necessary excavation etc. and setting jointed in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M & L for precast cement concrete 1:2:4 type B1, using 20mm graded stone aggregates as in covers slabs, complete all as specified and directed by the Engineer-in-Charge.

Excavation over areas not exc 1.5m deep and getting out in any type of soil, complete, all as specified and as directed.

Excavation over areas depth exc 1.5m and not exc 3m and getting out in any type of soil, complete, all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in sub base of flooring and the like, finished even and smooth without using extra cement, complete, all as specified & directed.

M&L for walling of random rubble, polygon rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.

M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified.

Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete, all as specified & directed. Note :- Soil obtained from excavation under serial item No. 1 & 2 here-in-before shall be used for filling under floors.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

S& F 25 mm dia, MS PVC coated decorative type curtain rod with fixing brackets and knob etc complete all as specified and directed.

Towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

M&L for 150 mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggergate as in coping, bed block etc including nesessary form work complete all as specified and directed.

M& L for Construction of soakage well of 1.2 m internal diameter and 4.50 m depth including excavation in any type of soil, foundation in PCC 1:3:6 type C2, wall withhoney comb masonary, top ring with RCC M 25 concrete including intersetic chamber in CM, RCC cover slabe in M 25 / SFRC cover, interconnecting pipe of RCC complete filled with brick bats, complete all as specified and directed..

Construction of septick tank including excavation, in any type of soil, foundation in PCC 1:2:4 type B-2, RR stone masonary in CM 1:4, RCC M25 (with and including reinforcement) slab cover including RCC precast manhole cover having 6 mm plate embedded all around/fibre reinforcement cover with angle iron frame vent pipe shaft and sludge chambers etc for 25 users, complete, all as specified and shown in drawing No CEBZ/TD/76/2011 Sheet 3/4.

M&L for RCC NP3 150 mm bore pipes laid on 150mm thick bed of PCC 1:4:8 with excavation in any type of soil including manholes/drop manhole of standard size made of brick masonry/RCC/Precast RCC with SFRC ventilating cover and frame includes all necessary items and activities to execute and make sewer line functional, complete all as directed by Engr-in-Charge.

M&L for rolled mild steel work as in door frame (chowkhats ) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

M&L for 16 to 18mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over and including 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed.

M&L for anodised Aluminium snap grid of size 605 x 605 mm for false ceiling all as specified .

S&F Hinges 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

Taking down wooden/PVC/FRP chowkets or frames with shutters (without taking off shutter from the frame ) exc 1.5 sqm but n.exc 4 sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed.

M&L for anodised aluminium powder coated frame for doors, windows including joining cleat for fixing all as specified and directed.

S & F in repair aluminium door shutters powder coated with frame of aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, brass handle and brass tower bolts of size 150mm x 02 Nos in each door, hinges, anodised aluminium snap beading screws,

S & F aluminium window shutters powder coated with frame of aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, complete all as specified and directed

S&F Aluminium anodised powder coated barrel tower bolts of extruded section 200mm long all as specifed and directed.

S&F Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring and vulcanised rubber piece fixed in floor , over all length of cover plate 140mm all as specified and directed.

S&F Door closer of aluminium extruded section hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete, all as directed.

M&L for 4.8 mm thick sheet glass, ordinary quality fixed to aluminum frame work and glazing with suitable size aluminum anodised beading exc 0.5 Sqm in each pane all as specified and directed.

S&F in repairs Mortice locks Brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate all as specified and directed.

M& L for 15mm thick rendering in cement mortar (1:6) on stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed

M & L for complete removal of existing treatment and preparation wall surfaces and applying two coats of oil bound distemper over 1 mm thick wall care of putty complete all as specified and directed

S&F stainless steel plat rack made of 1.00 mm thick of over all size 920mmx785mmx265mm and weight not less than 7.00 Kg each of approved quality, complete, all as specified & directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories and sunk type anodised terminal box thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:-

One light point controlled by one, one way switch.

One ceiling fan/exhaust fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket on independent board.

All as per item No.138 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F switch piano flush type 5 Amps, single pole one way.

S&F switch piano flush type 15 Amps, single pole one way.

S&F Socket outlet, 3 Pin 5/6 Amp, flush type.

S&F socket out let 2 in 1, 6 pin, 5/6 & 15/16 Amp multipurpose, flush type.

S&F ceiling fan regulator electronic flush , steped (four step) 230 Volts, AC .

S&F ceiling rose surface bakelite, 3 terminals 63.5 x 17 mm.

-Blank-

S&F LED tube light fitting in acrylic linear tube (1x 20 watt), 230V for single LED tube light including 1 x 20 W LED retrofit bar professional CW 6500 K cover channel, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make: Havells cat part no. PHOTON ULTRA2.01212 T8 20W LED 865 SPC (fot tube) & REGAL BATTEN T8 UPTO 1x22WD SBSWH (for batten) or equivalent from Bajaj/Philips/Crompton.

S&F of lamp holder PVC/polycarbonate type with back plate including LED lamp 9/11 watt complete all as specified and directed.

-Blank-

S&F LED mirror light fitting 10 Watt sleek polycarbonate channel with white acrylic cover complete with all accessories pre-wired and including connecting flexible copper conductor cable with suitable size.

S&F energy saving street light luminaire 15 watt LED , pressure die cast housing with high power LED as lighting source and lence embedded , polycarbonate diffuser, IP 66 protection including connecting with three core copper flexible wire from ceiling rose to connector of light fitting, complete with street light bracket made of 32 mm GI pipe , 1.2 mtr lenght with clamp, nut and bolts complete all as specified and directed. Make : Havells Cat Part No. ENDURAPEARLSL15WLED757SASYTOPC or equivalent from other specified makes in Appendix of PS.

S&F ceiling fan of 1200 mm sweep, 230 Volts, AC 50 Hz, copper winded, high speed, BEE star rated as per latest norms with motor, blades (03 Nos), down rod, canopy & shackle assembly including 0.5 sq mm three core PVC insulated flexible wire with mulitstranded copper conductor from ceiling rose to connector of ceiling fan and writing of MES No, complete, all as specified and directed by Engr-in-Charge. Make: Havells ES 50 or equivalent from Crompton/ Usha/Orient as approved by the GE.

S&F Exhaust fan, metal body,300 mm sweep, suitable for 230 Volt, SP, 50 Hz including louvers, complete, all as specified & directed. Make: Havells, Model: Ventil Air DS or equivalent from Bajaj/Khaitan.

S&F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 415 volts suitable for housing MCB's complete, all as specified and directed. Note: MCB DB and MCBs shall be of same make.

Al as per description of serial item No. 154 above but 4 way, 240 Volts.

S & F of MCB SPN, 240 volt, 25 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S & F of MCB SP, 240 volt, 6 to 32 Amp capacity, 10 KA , 'C' curve complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type C-2 and RCC 1:2:4 type B1 cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing, complete, all as specified & directed.

Supply, laying and testing XLPE insulated, armoured, heavy duty electric cable with aluminium stranded conductor, 1100 volt grade, 10 Sq mm 2 core nominal cross section.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top cable including spreading, levelling, watering and consolidation, complete all as specified and directed by Engineer-in-charge. Note: Punned thickness only shall be measured and paid.

Supply and laying of bricks of old class ‘B’ as protection cover to UG cable, laid flat adjoining to each other width wise, complete, all as specified.

Supply and laying GI tubing 40 mm bore, light grade with all fittings, laid in trenches/under floor or fixed on pole/on wall for cable protection.

supply and installation evoporative type desert cooler, single phase, 230 Volt, steel body made out of sheet metal not less than 20 SWG, water storage capacity not less than 40 litre, nominal air flow capacity of 4000 Cum per hour, complete, all as specified & directed. Make of Motor: Khaitan/Symphony/Bajaj/Kenstar

S&F LED bulk head luminaire 1x 10 W bulk, IP 65 protection complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed.

-Blank-

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed:

One light point/fan controlled by one way 5 Amps SP switch

One 5 pin 5 Amps socket outlet on same board with other switch

One 5 Pin 5 Amps socket outlet on independent board with other switch.

All as per item No 166.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed

S&F modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed.

S&F modular switch 1 way 16Amp, 1 module, complete all as specified and directed.

S&F modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F mdoular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing recess mounted 2' x 2' LED luminarie 36 watt, warm white light with white powder coated CRCA housing with LED driver, complete all as specified and directed.

M & L for submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid concealed conduits and the conduits accessories incl one run of green colour earth continuity conductor with 4 sqmm multi stranded copper conductor cable complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

S & F modular AC box single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 25 Amp MCB SP `C' series, complete all as specified and directed.

PD GUPTA AND COMPANY

Shree Sai Ram Enterprises

MITTAL ENTERPRISES

pawan and company