SPL REPAIR TO BLDG NO P-53, T-396 AND T-406 UNDER AGE B/R-II OF GE (N) MAMUN

Amount

Dismantling of brick tile or terracing tiles with bedding layer of mortar etc and removal of rubbish beyond MOD land complete all as specified & directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet walls to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane. (d) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm or as prescribed by manufacture of membrane/ directed by Engr-in-charge.

S&F 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new plastered surface of walls, applying wall care putti to make the surface smooth and applying two coats of oil bound distemper complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.

S&F aluminium anodized barrel tower bolts 150 mm of extruded section (as per sample) fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.

Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick plaster in two layers (10+5mm) in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid for separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed .

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado or verticle surface etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 10mm thick screed bed or bedding layer of mortar in CM 1:4 including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:6 including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.

M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of cement base paint including curing complete all as specified & directed.

M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore complete all as specified and directed.

S&F 15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc all as specified

S&F in repairs 15mm bore dia Bib taps long body, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore dia angle valve / stop valve cast copper alloy chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) cast copper alloy chromium plated fancy type, ISI marked with crutch or butter fly handleswith iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair PVC connection 15 mm dia & length 450 mm with PTMT nuts complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltr capacity, inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F in repairs vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding, connection to drain out pipe, flush pipe, flush pipe and anti syphonage pipe etc, making good to floor where required complete all as specified & directed.

S&F towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed.

S&F in repairs over head shower rose 125mm size (square/circular as per sample) for 15mm bore pipe, cast copper alloy Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified & directed. Make - Jaquar, Marc and Johnson

S&F 110mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

M&L for PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately)

M&L 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately)

M&L for bitumen blown of any grade, applied hot, two coats to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, benching, copings, kneelers, apex stones, bed plates, kerbs , fillet, gola, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., Brushing neat cement slurry with 3.0kg of cement per sq. meter complete all as specified and directed

S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including packing under, and haunching against thesides of pipes after they are laid and tested; in complete all as specified & directed.

S&F PVC (SWR) 110mm bore bends any radius, complete all as specified and directed.

S&F in repair 20mm bore alluminium anodised, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed.

Dismantling of water tank RCC/HDPE/Ferrocrete etc of size 500 Ltrs to 1000 Ltrs capacity, disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

M&L for 60mm thickness M-35 grade Machine pressed precast concrete factory made paver block confirming to IS-15658-2006 (topping thickness not less than 5mm thick with white cement and colour pigment non fadable epoxy coating) complete all as specified & directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, and removal of rubbish complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

All as per item No 54 but 0.50mm thick plain pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet.

S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

S&F PVC (SWR) 75mm bore bends any radius, complete all as specified and directed.

S&F PVC (SWR) 110mm bore junction single, (Single T) equal or unequal with acces door complete all as specified and directed.

S&F PVC (SWR) 75mm bore junction single, (Single T) equal or unequal, complete all as specified and directed.

M & L Plain cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken floors portion including demolition of PCC & removal of rubbish complete all as specified and directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 150mm, fixed in floor complete all as specified & directed.

M&L false ceiling of 7mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down of existing false ceiling with grid work of any description and removal complete all as specified and directed. Make: M/s Saint Gobain or equivalent of Armstong/Everest

Taking down of windows of any description, S&F in reparis Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate), including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3, making good disturbed surface as per existing complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm wood grain printed PVC sheet & edges shall be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F for 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed

S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 1000 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank, removal from site and disposal beyond MOD land complete all as specified and directed..

S&F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal length not not less than 1.5M (as per sample) complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old plastered surface of ceiling by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots and applying two coats of white wash on ceiling surface complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for laying of cables etc n exc 10 sq m on plan and n exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance exc 250m but n exc 1500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

S&F Factory Made Solid PVC Moulded door Shutter With solid PVC Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges (as per sample) complete all as specified and directed.

M&L for preparation of new concrete/ plastered surface of any description and applying two coats of weatherproof exterior emulsion paint complete all as specified and directed.

M&L Preparation of old plastered/unplastered surfaces of walls by making plastered surface smooth using wall care putty to disturbed surfaces (where required) and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface of walls by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots including minor repair (to make good in cement mortar 1:6 or with POP) to obtain smooth surface and applying two coats of cement base paint complete all as specified and directed.

S&F in repair 15mm bore dia concealed type angle valve / stop valve (as per sample) cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down,screwed for iron pipe of 15mm bore complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed.

M&L for Round chamfering to the edges of marble/granite slabs not exc 15 mm wide complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade, mirror polished complete over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6, complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade, mirror polished complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 110mm bore, complete all as specified and directed.

S&F 20mm bore dia ball valve (minimum weight- 210 gms), high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete, fixed in repair all as specified & directed.

M&L for Sand filling under floors or in foundation in layers n exc 25mm thick including watering and consolidation complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified & directed.

Taking down carefully unsv copper/aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sketch fitting etc removing materials to store for keeping in safe custody for taking creit and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick GI/MS pressed steel sunken boxes of adequate size, 3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note: 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible.

All as per Ser item No 95 but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 95 but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 95 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick GI/MS pressed steel sunken boxes of adequate size, 3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note: 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible.

All as per Ser item No 99 but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 99 but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Ser item No 99 but for one one light point on independent board controlled by two 02 way switch.

All as per Srl item No 99 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type, 240 volts complete all as specified and as directed.

S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed.

S&F switch piano flush button single pole two way 16 Amp 240 volts complete all as specified and as directed.

S&F stepped type electronic fan regulator flush type Socket type on the phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed.

S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals.

S&F modular switch one way 10 Amp one module, front operated complete all as specified and directed. Make: Havells / Schneider /Legrand /Indoasian(shynora)

S&F modular socket 6 Amp, 5 Pin with shutter, 2 module complete all as specified and directed. Make: Havells/ Schneider / Legrand / Indoasian(shynora)

S&F modular switch piano type flush button single pole 16 Amp one module, front operated complete all as specified and directed. Make: Havells/ Schneider / Legrand/ Indoasian(shynora)

S&F modular socket 6 Amp/16 Amp, 6 Pin multipurpose with shutters , 2 module complete all as specified and directed. Make: Havells/ Schneider / Legrand/ Indoasian(shynora)

S&F fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as spd and directed. Make: Havells/ Schneider /Legrand/ Indoasian(shynora)

S&F Lamp holder jumbo modular type, PVC/Polycarbonate type with back plate complete all as specified.

Taking down carefully unsv copper/aluminium sub main wiring of any size including old broken steel/PVC conduit, removing materials to store for keeping in safe custody for taking credit complete all as specified.

M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.5mm thick with all accessories incl cutting chases on wall and making good to the disturbed surface of wall/floor with cement mortar 1:4 and finishes to match existing surface complete all as specified and directed.

Disconneting & taking down ceiling fan up to 1400 mm sweep / exhaust fan up to 450mm sweep for servicing, strip opening of fan including servicing and greasing complete. Re-assembling and refixing to the same/other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors for complete fan as required, testing complete after servicing and fixing for smooth and noise free operation complete all as specified and directed.

S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

All as per ser item No 120 but for 10 W LED batten fitting 2 feet long.

S&F surface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F 35/36 watt LED 2'x2' slim panel, 220 V AC recessed type having white powder coated CRCA housing and high quality diffuser for glare free light with driver and mounting clips suitable for POP/gypsum ceiling and connecting up suitable size flexible copper conductor cable incl making good the disturbed POP surface complete all as specified.

M&L for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface complete all as specified and directed. Note: MCBs will be measured and paid seperately under respective items

All as per Srl item No 124 but for 4 way DB.

S&F MCB SP 240V, 50Hz of rating 6 to 32 Amp, 'B' curve using suitable size copper thimbles complete all as specified and directed. Make: Legrand/Siemens/Schneider/Havells

All as per Ser item No 126 but for size 40-63 Amps MCB SPN.

S&F LED wall security lights of 25 Watt having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

S&F LED wall security lights of 35 Watt having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit alongwith angel iron 40x40x3mm frame and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 3 of SSR part I 1991 or directed and testing on completion.

M&L for sand filling in trenches as cushion to under ground cables 8 cm thick before laying the cable and 15 cm thick when cables are laid and tested complete all as specified and directed. Note: Only punned thickness i.e 18cm shall be measured and paid.

M&L for Sub class ‘B’ bricks (fly ash bricks) old size laid dry, flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 2 core, including taking down old, complete, all as specified and directed.

M&L for GI tubing light grade 40mm bore with fittings, laid for protection of cable under road crossing or fixed to walls or pole by means of 2 Nos FI Clamps, nuts and bolts complete all as specified and as directed.

Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 62,611.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

M/S NARESH KUMAR SHARMA (BID ID -3101677)

WALIA ENTERPRISES (BID ID -3103810)

s k construction co (BID ID -3097593)

satpal and brothers (BID ID -3104416)

M/S DUGGAL CONSTRUCTION CO (BID ID -3097589)

M/S HIMANSHU BUILDERS (BID ID -3096889)

M/S SHAKTI ELECTRIC WORKS (BID ID -3101795)

M/s Northern India Construction co (BID ID -3101931)

kailu construction co (BID ID -3099191)