Loading…
Loading…
Tender Value
₹24.0 L
EMD Value
₹47,952
Closing Date
11 Jun 2026, 3:00 pm5d left
EXECUTIVE ENGINEER (E)
Executive Engineer Electrical Division-3, Siri Fort Road Behind Gargi College New Delhi-49
Replacement of Old Rusted MS Pipe Line with HDPE Pipe Line for Water Drainage System at QGC.
2026_DDA_911627_1
08/EE/ELD-3/DDA/2026-27
Open Tender
Electrical Works
90 days
As Per Tender Document
Please refer Tender documents.
11 documents required · 11 mandatory
₹0
₹47,952
4 Jun 2026
4 Jun 2026
12 Jun 2026
4 Jun 2026
11 Jun 2026
4 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of 110 mm PE-100, HDPE Pipe line conforming to IS:4984, suitable for working pressures, PN-10, High strength & durability: Suitable for long-term pressure applications Corrosion & chemical resistant: No rusting or scaling Flexible: Can withstand ground movement and pressure variations Leak-proof joints: Fusion welding creates a monolithic system Long service life: 50+ years under standard operating conditions Lightweight: Easy transportation and installation Smooth internal surface: Low friction loss, better flow efficiency. | 150 | Meter | 1,236 | ₹1,85,400 |
| 2 | Providing and fixing of 315 mm PE-100, HDPE Pipe line conforming to IS:4984, suitable for working pressures, PN-10, High strength & durability: Suitable for long-term pressure applications Corrosion & chemical resistant: No rusting or scaling Flexible: Can withstand ground movement and pressure variations Leak-proof joints: Fusion welding creates a monolithic system Long service life: 50+ years under standard operating conditions Lightweight: Easy transportation and installation Smooth internal surface: Low friction loss, better flow efficiency | 100 | Meter | 10,131 | ₹10,13,100 |
| 3 | Providing and fixing of 110 mm HDPE electrofusion fittings (including elbow, flange, coupler, and tail piece). Material: PE100 (Highdensity polyethylene, virgin grade) Pressure Rating: PN 10 (10 bar working pressure) Jointing Method: Electrofusion welding (embedded heating coil system) | 1 | Job | 79,300 | ₹79,300 |
| 4 | Providing and fixing of 315 mm HDPE electrofusion fittings (including elbow, flange, coupler, and tail piece). Material: PE100 (Highdensity polyethylene, virgin grade) Pressure Rating: PN 10 (10 bar working pressure) Jointing Method: Electrofusion welding (embedded heating coil system) | 1 | Job | 93,718 | ₹93,718 |
| 5 | Providing and fixing of 315 mm HDPE Header with connection of 2 Nos. of pump with suitable dia of pipe and outgoing dia of 315mm i/c all fitting, testing, commissning as reqired | 2 | Job | 1,58,599 | ₹3,17,198 |
| 6 | Providing and fixing of 4" Butterfly Valve (Wafer Type) PN 1.6 with S.G Iron Disc, Design Standard IS 13095 / BS EN 593 / BS 5155). Wafer Type. Lever Operated. S.G iron construction. S.G iron disc which is accurately guided between the two stems, PN 1.6 – Test Pressure (Hydrostatic):
Shell : 2.4 MPa
Seat : 1.76 MPa
Maximum Working Temperature : 90°C
Maximum Working Pressure : 1.6 MPa With Flange and Nut Bolt | 4 | Nos. | 26,674 | ₹1,06,696 |
| 7 | Providing and fixing of 4" Check Valve/NRV, Design standard API 594. Wafer Type Design, to take lesser space than the conventional Check Valve. Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports. Being cylindrical body, stresses are uniformly distributed. Much longer seat life because of Bronze / S.S to Rubber contact. Less wear and tear of seat surfaces. End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150. Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow. Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity. Test Pressure (Hydrostatic):
Shell : 24.50 kg/cm² (350 psig)
Seat : 16 kg/cm² (230 psig)
Maximum Working Temperature : 80°C With Flange and Nut Bolt | 4 | Nos. | 26,961 | ₹1,07,844 |
| 8 | Laying, Trenching and backfilling in soft soil up to 400 mm depth for laying pipes up to 110 mm diameter. | 150 | Nos. | 202 | ₹30,300 |
| 9 | Laying, Trenching and backfilling in soft soil up to 600 mm depth for laying pipes up to 315 mm diameter. | 100 | Meter | 505 | ₹50,500 |
| 10 | Supply, Installation, Testing and Commissioning of Submersible dewatering Sump Pumps of Capacity 10HP along with Shaft SS420, motor for drainage system having min. discharge capacity of 1.5-2 lac per houre with150 mm delivery size, Head :12 mtr to 15 mtrs, Solid Handling: 90 mm as required with base foundation& CC foundation, fitting, accessories with outdoor control panel, dry run protection, float switch , Wire from Starter to Pump and fittings and accessories etc as required. | 2 | Nos. | 1,42,988 | ₹2,85,976 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.20 MB
NIT.pdf
Tender Documents • 5.81 MB
BOQ_958082.xls
BOQ • 1.04 MB
Download all tender documents and submit your bid