Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.0 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹11.3 L+₹34,918 (3.19%)Rejected-Finance | L2 | Rejected-Finance Being NOT Lowest | |
| 3 | L3₹11.4 L+₹43,796 (4.00%)Rejected-Finance | L3 | Rejected-Finance Being NOT Lowest | |
| 4 | L4₹11.9 L+₹98,338 (8.98%)Rejected-Finance | L4 | Rejected-Finance Being NOT Lowest | |
| 5 | L5₹12.6 L+₹1.7 L (15.4%)Rejected-Finance | L5 | Rejected-Finance Being NOT Lowest |
Tender Value
₹14.7 L
EMD Value
₹29,400
Closing Date
18 Jan 2020, 6:00 pmClosed
GE BHOPAL
GE BHOPAL
PROVN OF PERIMETER FENCING OF DEF LAND NEAR BSO YARD (LBW-57) BAIRAGARH UNDER GE BHOPAL.
2019_MES_310415_1
8616/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Class E
Category a i
6 documents required · 6 mandatory
₹500
Yes
GE BHOPAL
₹29,400
Yes
24 Feb 2020
30 Dec 2019
20 Jan 2020
30 Dec 2019
18 Jan 2020
13 Jan 2020
Amount
Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
S&F Rolled mild steel conforming to Fe-290 (Gde E-165) as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, complete all as specified and directed.
S&F Mild steel conforming to Fe-290 Gde E-165 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; handmade sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and directed.
M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.
S&F mild steel round bars conforming to Gde 1 (IS: 432 part-I) 5 to 10mm dia as in stiffeners in chain link fencings etc complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 10cm but not exceeding 15 Cm long and dia of shank 11 to 15mm complete all as specified and directed.
S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed. complete all as specified and directed.
Supply only chain link mild steel galvanized fencing, any type or size complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.
M&L for Preparing new or previously untreated steel & iron surfaces of any description, width or girth and treating with tar or coal tar black paint trating ends of posts, area tarred exc 0.1 sqm but not exc 0.5 sqm each complete all as specified and directed.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose / hard dense soil complete all as specified and directed
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed.
M&L for Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in columns, pillars, posts & struts complete all as specified and directed
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
Use & waste of Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for fair finished flat surfaces of concrete complete all as specified and directed.
Use & waste of Form work to sides of square or rectangular columns, pillars, posts and struts for fair finished surfaces of concrete complete all as specified and directed
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
M&L for Rendering 10mm thick in cement mortar 1: 3 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.
S&F Framed work of rolled mild steel conforming to Fe 410-W (Gde E-250) quality -A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M S MEWALAL UPADHYAY
Samaksh Enterprises
NDS TRADERS
Jyoti enterprises
RAJPATI CONSTRUCTION
Raja enterprises
M/s VIKAS TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .