Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹44,305
Closing Date
30 Sept 2026, 5:10 pm7d left
Directorate of Municipal Administration
N K Vishwanatha
Repair and Renovation works, Supply of furniture at Samudaya bhavana of ward 21,22, and 17 and Fabrication, supply and installation of MS stands for installation of Bag dispenser in limits of CMC Ramanagra.
DMA/2026-27/OW/WORK_INDENT62518
DMA/2026-27/OW/WORK_INDENT62518
Open
Other Works
Two Tender Document System(Two Cover)
DMA City Municipal Council Ramanagara
6 documents required · 6 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26, Satisfactorily completed (at least 50% of the contract value i.e 10.46 Lakhs), as prime contractor, at least one Similar Work
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26, Executed minimum quantities as 1. Painting works 1372.00 Sqm, 2. Tiling works 50.00 Sqm, 3. Fabrication work 2637.00 Kgs and 4. Plastering works 144.00 Sqm.
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26, Achieved in at least two financial years an average annual financial turnover of Rs. 20.92 lakhs (usually not less than the estimated cost under this contract and Turnover certificate from CA with valid UDIN No. to be furnished along with necessary documents)
Each tenderer should further demonstrate, Liquid assets and/or availability of credit facilities of not less than Rs. 6.27 lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.) (usually 30% of the amount of contract) in the format given in the bid document
Bidder should be minimum Class III P.W.D registered Civil contractor
Bidder should furnish site inspection report (The site inspection condition has been incorporated in public interest to enable the bidders to understand in advance the nature of the work, local site conditions, access arrangements, availability of water/electricity, and the technical challenges involved in execution of the work. This condition is uniformly applicable to all tenderers)
₹500
₹44,305
15 Sept 2026
15 Sept 2026
1 Oct 2026
25 Sept 2026
Repair and Renovation works, Supply of furniture at Balageri Samudaya bhavana of ward 17
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remo...
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional c...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional co...
Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surfa...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Providing and supplying Steel Almirah (6.5' H incl legs x 3'0" W x 1.5"D) for office
use (record keeping) with 2 steel doors for the books tiles and made of 18 / 20 gaugeMS sheet fine quality steel co...
Providing and supplying High back plastic chair with arm, weight capacity 125kgs,
Providing and supplying OfficeTable Approximate Size 183cm x 91cm x 77cm & selected Color Minimum two drawers and locker Material Compressed Wood panels with laminated melamine surface Surface shall b...
Repair and Renovation works, Supply of furniture at Samudaya bhavana of janatha colony ,ward 22,
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per directi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete :
Providing and fixing IS : 12817 marked stainless steel butt hinges with
stainless steel screws etc. complete : 100x58x1.90mm
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remo...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...
Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 90 mm long, weighing not less than 93 g
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC Tee
Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC BEND
Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 160mm dia PVC coupler...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way
Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way
Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch
Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch
4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.
Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps
Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 wit...
PVC Batten with LED Tubes Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-2...
Supplyingcapacitor type ceiling fan complete with down rod blades, shackle, canopies etc,for operation on 230V,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing...
Supplyingof 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)
supply and installation of MS stands for installation of Bag dispenser at various location in limits of CMC Ramanagra.
Dismantling of Cement Concrete Pavement - Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stoc...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable formountingmodular switchplateswithdue
groove cutting inBrick/C.Cwall, including necessary rawl plugs,
Machine/NF screw...
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting backplate with required
nos. ofmachine screws, bolts nuts etc., complete on the existing
Supplyingandfixingofmodular switch&connectedaccessorieson
existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying&fixing miniature circuit breakers on existingMCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicatorON/OFF, energycross-3 withShort circuitbreaking
Wiring for lighting/powercircuitusingoneof FRLSPVCinsulated
1100Vgrade,multistrandcopperwirewithlowconductor resistance
singlecore inopenorconcealedsystemofwiringwithspecifiedIS
Wiring for lighting/powercircuitusingoneof FRLSPVCinsulated
1100Vgrade,multistrandcopperwirewithlowconductor resistance
singlecore inopenorconcealedsystemofwiringwithspecifiedIS
1.1 kV Class HR (Heat Resistant) PVC
Insulated & Sheathed Aluminium Single
Core Lead wires as per IS-694: 2010 PVC Wire - 4 Sqmm
Weight per 100 Mtr Coil: 2.4 Kg
Supplying heavygaugePVCconduit pipe . dia .mmthick
confirming to IS 2509 with suitable size bends, junction boxes,
adhesive pasteetc , andfixingusinginvertedwoodplugs incaseof
RCCceilingandRCCwall/ st...
Repair and Renovation works, Supply of furniture at Samudaya bhavana of ward 21
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remo...
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional c...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional co...
Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surfa...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-2 62518.doc
Tender Document • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .