At GPZ and HMY: Additional work required to complete the Phase-I of work of "Under ABSS - Soft upgradation of GPZ, HMY stations - Improvement of Facade, entry Porch, Waiting hall, & circulating area. (Project id: 08.04.53.25.3.53.011)

Wood and PVC Work, Aluminium Work, New Technologies and Material for Improvement of Facade,

entry Porch, Waiting hall and other associated works to soft upgrade.

S No. Item No Description of Item Unit Qty Rate Amount

9.0 WOOD AND P.V.C. WORK

9.1S FRAMES AND TRUSSES

Providing wood work in frames of doors,

windows, clerestory windows and other

frames, wrought framed and fixed in

9.1 position with hold fast lugs or with dash

fasteners of required dia & length (hold fast

lugs or dash fastener shall be paid for

Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I)

decorative type, core of block board

construction with frame of 1st class hard

wood and well matched teak 3 ply

veneering with vertical grains or cross

bands and face veneers on both faces of

9.20.2 30 mm thick including ISI marked Stainless Sqm 26.95 3167.95 85376.25

Steel butt hinges with necessary screws

Extra for Providing and fixing flush doors

with decorative veneering instead of non

decorative ISI marked flush door shutters

conforming to IS: 2202 (Part I)

9.40S MISCELLANEOUS-WOOD WORK

Providing and fixing M.S. grills of required

pattern in frames of windows etc. with M.S.

9.48 flats, square or round bars etc. including

priming coat with approved steel primer all

9.48.2 Fixed to openings /wooden frames with rawl Kg 700 238.35 166845

plugs screws etc.

9.72S BRASS FITTINGS

Providing and fixing bright finished brass

9.74 tower bolts (barrel type) with necessary

screws etc. complete :

Providing and fixing bright finished brass

9.75 door latch with necessary screws etc.

RANGIYA DIVISION-ENGINEERING/N F RLY

9.76 Providing and fixing bright finished brass Each 15.56 854.65 13298.35

100 mm mortice latch and lock with 6

9 levers and a pair of lever handles of

approved quality with necessary screws etc.

Providing and fixing bright finished brass

handles with screws etc. complete:

9.82 Providing and fixing bright finished brass Each 31.11 121.65 3784.53

11 hanging type floor door stopper with

necessary screws, etc. complete.

9.84 Providing and fixing aluminium extruded Each 15.56 983.15 15297.81

section body tubular type universal

hydraulic door closer (having brand logo

with ISI, IS : 3564, embossed on the body,

door weight upto 36 kg to 80 kg and door

width from 701 mm to 1000 mm), with

double speed adjustment with necessary

accessories and screws etc. complete.

9.88S CHROMIUM PLATED BRASS FITTINGS

Providing and fixing chromium plated brass

9.92 handles with necessary screws etc.

ANODISED ALUMINIUM FITTINGS (ALL

FITTINGS SHALL BE ISI MARKED)

Providing and fixing ISI marked aluminium

butt hinges anodised (anodic coating not

9.95 less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or

shade with necessary screws etc.complete:

9.105S GYPSUM BOARD PARTITIONS

RANGIYA DIVISION-ENGINEERING/N F RLY

Providing and fixing factory made uPVC

glazed/wire mesh windows/ doors

comprising of lead free uPVC multi-

chambered frame, sash and mullion/coupler

(where ever required) extruded profiles

having minimum wall thickness of 1.70 mm

for Series R1 and R2 profiles and 2.10 mm

for Series R3 and R4 profiles conforming to

EN: 12608 in any shape, colour and design

duly reinforced with galvanized mild steel

section made of required shape & size as

per CPWD Specification, uPVC extruded

glazing beads, interlocks and Inline sash

adaptor (where ever required) of

appropriate dimension, EPDM gasket,

hardware, SS 304 grade fasteners of

minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6

grade sleeve for fixing frame to finished

wall as per IS 1367 : Part 1 to 14, plastic

9.147 packers, plastic caps and necessary

stainless steel screws etc. Profile of frame,

sash & mullion (if required) shall be mitred

cut and fusion welded/mechanically jointed

duly sealed at all corners, including drilling

of holes for fixing hardware and drainage of

water etc. After fixing frame the gap

between frame and adjacent finished wall

shall be filled with weather proof silicon

sealant over backer rod of approved size

and quality, all complete as per approved

drawing conforming to CPWD specification

& direction of Engineer-in-Charge. Section

of steel reinforcement and cross sections of

uPVC profiles to be as per design approved

by Engineer-in-Charge. Wire mesh / Glazing

of plain/ toughened/ laminated/ double

glass unit with / without high performance

coatings as per design requirements and

conforming to IS: 3548 & IS: 16231 shall be

paid separately.

Two track four panels sliding door with

Aluminium channel for roller track, wool

pile, zinc alloy (zamak) powder coated

handle on three panels along with multi-

point locking system, adjustable nylon

rollers with SS 304 body.

9.147.B2.1 Using R3 series with frame (55mm & above) Sqm 20.56 7345.35 151020.4

16 x (40mm & above) & sash (30mm & above)

x (74mm & above). (Height upto 2.5 meter).

Ventilator Casement window single panel

with or without fixed panel with S.S. 304

9.147.D1 friction hinges as per size and weight of

sash, single point locking zinc alloy (zamak)

powder coated handles

9.147.D1.2 Using R2 series with frame (39mm & above Sqm 17.78 12254.9 217892.12

) x (39mm & above) & sash /mullion (39mm

& above) x (60mm & above). (Height upto

9.147.D1.3 Using R3 series with frame (55mm & above Sqm 22.78 11919.85 271534.18

) x (45mm & above) & sash /mullion (55mm

& above) x (65mm & above). (Height above

Casement window single panel with S.S.

304 friction hinges as per size and weight

of sash, multi-point locking system, zinc

alloy (zamak) powder coated handles.

9.147.E1.1 Using R2 series with frame (39mm & above) Sqm 44.5 14449.25 642991.63

19 x (39mm & above) & sash (39mm & above)

x (60mm & above). (Height upto 1.2 meter)

RANGIYA DIVISION-ENGINEERING/N F RLY

21.0 ALUMINIUM WORK

21.1S General

Providing and fixing aluminium work for

doors, windows, ventilators and partitions

with extruded built up standard tubular

sections/ appropriate Z sections and other

sections of approved make conforming to

IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including

necessary filling up the gaps at junctions,

i.e. at top, bottom and sides with required

21.1 EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust

free, straight, mitred and jointed

mechanically wherever required including

cleat angle, Aluminium snap beading for

glazing / panelling, C.P. brass / stainless

steel screws, all complete as per

architectural drawings and the directions of

Engineer-in-charge. (Glazing, panelling and

dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.1 Anodised aluminium (anodised transparent Kg 116.67 495.05 57757.48

or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots

and making provision for fixing of fittings

wherever required including the cost of

EPDM rubber / neoprene gasket required

(Fittings shall be paid for separately)

21.1.2.1 Anodised aluminium (anodised transparent Kg 46.67 598.6 27936.66

or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC

Providing and fixing 12 mm thick

prelaminated particle board flat pressed

three layer or graded wood particle board

conforming to IS: 12823 Grade l Type ll, in

21.2 panelling fixed in aluminium doors, windows

shutters and partition frames with C.P.

brass / stainless steel screws etc. complete

as per architectural drawings and directions

of engineer-in-charge.

21.2.1 Pre-laminated particle board with Sqm 27.22 1139.3 31011.75

22 decorative lamination on one side and

balancing lamination on other side

Providing and fixing glazing in aluminium

door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene

21.3 gasket etc. complete as per the

architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

21.3.1 With float glass panes of 4.0 mm thickness Sqm 27.22 1176.8 32032.5

(weight not less than 10kg/sqm)

RANGIYA DIVISION-ENGINEERING/N F RLY

Providing and fixing double action hydraulic

floor spring of approved brand and

manufacture conforming to IS : 6315,

having brand logo embossed on the body /

plate with double spring mechanism and

door weight upto 125 kg, for doors,

21.4 including cost of cutting floors, embedding

in floors as required and making good the

same matching to the existing floor

finishing and cover plates with brass pivot

and single piece M.S. sheet outer box with

slide plate etc. complete as per the

direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum Each 7.78 2823.85 21969.55

1.25 mm thickness

21.4.2 With brass cover plate minimum 1.25 mm Each 3.11 2966.1 9224.57

21.18 Providing and fixing 12 mm thick frameless Sqm 7.78 5325.9 41435.5

toughened glass door shutter of approved

brand and manufacture, including providing

and fixing top & bottom pivot & double

acting hydraulic floor spring type fixing

arrangement and making necessary holes

etc. for fixing required door fittings, all

complete as per direction of Engineer-in-

charge (Door handle, lock and stopper etc.

to paid separately)

STRUCTURAL GLAZING ALUMINIUM

COMPOSITE PANEL

25.1S General

25.8 Design supply & installation of suspended Sqm 44.5 9502.35 422854.58

Spider Glazing system designed to

withstand the wind pressure as per IS 875

(Part-III). The Suspended System held with

Spider Fittings of SS-316 Grade Steel of

approved manufacturer with glass panel

having 12 mm thick clear toughened glass

held together with SS- 316 Grade Stainless

steel Spider & bolt assembly with laminated

glass fins 21 mm thick. The Glass fins and

glass panel assembly shall be connected to

Slab/beams by means of SS- 316 Grade

stainless steel brackets & Anchor bolts and

at the bottom using SS channel of 50x25x2

mm using fastener & anchor bolts, non

staining weather sealants of approved

make, Teflon/ nylon bushes and separators

to prevent bi-metallic contacts, all complete

to perform as per specification and

27 approved drawings. The complete system to

be designed to accommodate thermal

expansion & seismic movements etc. The

joints between glass panels (6 to 8 mm)

and gaps at the perimeter & in U channel of

the assembly to be filled with non staining

weather sealant, so as to make the entire

system fully water proof & dust proof. The

rate shall include all design, Engineering

and shop drawing including approval from

structural designer, labour, T&

P,scaffolding, other incidental charges

including wastage, enabling temporary

services all fitting fixers nut bolts, washer,

Buffer plates, fastener, anchors,SS channel

laminated glass etc. all complete. For the

purpose of payment, actual elevation area

of Glazing including thickness of joints and

the portion of Glass panel inside the SS

channel shall be measured.

26.0 NEW TECHNOLOGIES AND MATERIALS

RANGIYA DIVISION-ENGINEERING/N F RLY

26.1S General

Providing and fixing at Bamboo Mat board

conforming to IS:13958-1994 for partition

26.6D to frame by bucking or studding with

screws etc. complete (Frames, backing or

studding to be paid separately)

26.73S PREFAB/PRECAST TECHNOLOGY

Providing and fixing factory made single

extruded WPC (Wood Polymer Composite)

solid door/window/Ceosetory windows &

other Frames/Chowkhat comprising of

virgin PVC polymer of K value 58-60

(Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/

wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms)

fabricated with miter joints after applying

PVC solvent cement and screwed with full

body threaded star headed SS screws

having minimum frame density of 750

kg/cum, screw withdrawal strength of 2200

N (Face) & 1100 N (Edge), minimum

compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and

resistance to spread of flame of Class A

category with property of being

termite/borer proof, water/moisture proof

and fire retardant and fixed in position with

M.S hold fast/lugs/SS dash fasteners of

required dia and length complete as per

direction of Engineer-In- Charge. (M.S hold

fast/lugs or SS dash fasteners shall be paid

for separately).

Providing and fixing factory made single

extruded WPC (Wood Polymer Composite)

solid decorative type flush door shutter of

required size comprising of virgin polymer

of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non

toxic additives (maximum toxicity index of

12 for 100 gms) having minimum density of

650 kg/cum and screw withdrawal strength

of 1800 N (Face) & 900 N (Edge), minimum

compressive strength 50 N/mm2, modulus

of elasticity 850 N/mm2 and resistance to

spread of flame of Class A category with

property of being termite/borer proof,

water/moisture proof and fire retardant.

WPC to be laminated with PVC foil of

minimum 14 microns thick of approved

design pasted with hot melt adhesive on

both faces of shutter and fixing with

stainless steel butt hinges of required size

with necessary full body threaded star

headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge.

RANGIYA DIVISION-ENGINEERING/N F RLY

Providing and fixing of facade at all heights

with extruded hollow Clay / Terracotta

ventilated rainscreen tiles of height 250/

300/ 400 mm and length of 595 mm of

approved texture, design and pattern

having Flexural Strength/ Modulus of

Rupture of >=14 N/m2 and maximum

water absorption of 10% tested as per ISO

respectively in true level fixed to a

supporting aluminium framework (Alloy

6063 T5/T6) consisting of vertical 'T' (for

intermediates)/ 'L'(for ends/ termination)/

Tubular sections (at corners) of size

80x60x2 mm/ 40x60x2 mm/ 40x40x2 mm

respectively, spaced at maximum spacing

of 600 mm c/c matching to the tile vertical

grid, and horizontal aluminium 'C'-clamps of

size 56x25x2 mm thickness of length 150

mm at junction of tiles and of length 75 mm

at wall ends/ corners fixed on top of the

vertical sections at spacing of 250/ 300/

400 mm c/c matching to the tile horizontal

grid with two numbers of self-drilling / self-

tapping SS screws of size 5.5x25 mm with

EPDM washers. The vertical 'T'/'L/ Tubular'

sections shall be fixed to the wall using

HDG (hot-dip-galvanized) steel L-brackets

(galvanizing thickness of minimum 80

microns) of size 110x80x6 mm at

intermediate vertical aluminium profiles

and of size 220x110x12 mm at outer

corners and stainless steel grade 304, M10

full threaded anchor fasteners with nylon

sleeve 100 mm long (for brick work) and M8

expansion anchor fasteners 75 mm long for

concrete surface, spacing of brackets to be

based on a structural/ static calculation.

The brackets shall be of length 175 mm at

junction of two vertical aluminium profiles

and of length 100 mm at intermediate

points of vertical profiles and shall be fixed

to the vertical aluminium T / L / Tubular

profiles using two numbers self-drilling/ self-

tapping SS screws of size 5.5x25 mm with

EPDM washers. EPDM gaskets to be fixed in

between brackets and vertical profiles. The

tiles shall be mounted on the 'C' clamps

such that the tiles are supported at top and

bottom at both ends. The tiles shall be

additionally secured to the horizontal 'C'

clamps using special SS clips of required

size which shall be inserted and pressed

into position on the 'C' clamps holding the

tiles and the cut-tiles shall be glued at

points to the horizontal 'C' clamps by using

MS Polymer sealant adhesive. The vertical

joint open groove between two adjacent

tiles shall be 5 mm. The tiles and system

shall be designed to resist wind load as per

IS 875 (Part 3) according to different zones.

The tiles shall be installed using the

ventilated rain screen principle with

provision for natural ventilation of the space

between the facade tiles and the structural

wall. The work shall be carried out as per

specification, drawing and as per direction

of the Engineer-in-Charge.

tiles of other than grey colors

RANGIYA DIVISION-ENGINEERING/N F RLY

Schedule Schedule G-DSR-2023 Items for Roofing

Roofing works for Improvement of Facade, entry Porch, Waiting hall and other associated works to

S No. Item No Description of Item Unit Qty Rate Amount

12.0 ROOFING

12.37S RAIN WATER SPOUT AND PIPE

Providing and fixing on wall face

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes.

Providing and fixing on wall face

unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain

12.42 water pipes conforming to IS : 13592 Type

A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap

for thermal expansion.

12.42.3 Single tee with door

12.42.4 Single tee without door

12.42.5 Bend 87.5 degree

12.42.6 Shoe (Plain)

Providing and fixing unplasticised -PVC pipe

clips of approved design to unplasticised -

PVC rain water pipes by means of 50x50x50

mm hard wood plugs, screwed with M.S.

screws of required length, including cutting

brick work and fixing in cement mortar 1:4

(1 cement : 4 coarse sand) and making

good the wall etc. complete.

12.50 Providing and fixing precoated galvanised Sqm 980.2 738.65 724024.73

iron profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-

charge) of total coated thickness 0.50 mm

(base metal of minimum 0.45 mm thickness

with total coating thickness of 0.05 mm)

with zinc coating 120 grams per sqm as per

IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the

sheet and polyester top coat 15-18

microns. Sheet should have protective

guard film of 25 microns minimum to avoid

scratches during transportation and should

be supplied in single length upto 12 metre

or as desired by Engineer-in-charge. The

sheet shall be fixed using self drilling /self

tapping screws of size (5.5x 55 mm) with

EPDM seal, complete upto any pitch in

horizontal/ vertical or curved surfaces,

excluding the cost of purlins, rafters and

trusses and including cutting to size and

shape wherever required.

RANGIYA DIVISION-ENGINEERING/N F RLY

Providing and fixing precoated galvanised

steel sheet roofing accessories of total

coated thickness 0.50 mm (base metal of

minimum 0.45 mm thickness with total

coating thickness of 0.05 mm) with Zinc

coating 120 grams per sqm as per IS: 277,

in 240 mpa steel grade, 5-7 microns epoxy

primer on both side of the sheet and

polyester top coat 15-18 microns using self

drilling/ self tapping screws complete :

Schedule Schedule H-DSR-2023 Items for Sanitary, Water Supply & Drainage

Sanitary, Water Supply & Drainage for Improvement of Facade, entry Porch, Waiting hall and other

associated works to soft upgrade.

S No. Item No Description of Item Unit Qty Rate Amount

17.0 SANITARY INSTALLATIONS

17.1S General

Providing and fixing water closet squatting

pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush

17.1 pipe, with manually controlled device

(handle lever) conforming to IS : 7231,with

all fittings and fixtures complete, including

cutting and making good the walls and

floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. Each 4.67 6767.4 31603.76

1 pan of size 580x440 mm with integral type

Providing and fixing white vitreous china

flat back half stall urinal of size

580x380x350 mm with white PVC

automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe,

17.5 spreaders with unions and clamps (all in

C.P. brass) with waste fitting as per IS :

2556, C.I. trap with outlet grating and other

couplings in C.P. brass, including painting of

fittings and cutting and making good the

walls and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. Each 7 12071.75 84502.25

automatic flushing cistern

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32

mm C.P. brass waste of standard pattern,

including painting of fittings and brackets,

cutting and making good the walls wherever

17.7.3 White Vitreous China Wash basin size Each 9.33 2301.75 21475.33

3 550x400 mm with a pair of 15 mm C.P.

brass pillar taps

17.7.8 White Vitreous China Surgeon type wash Each 12 3600.6 43207.2

basin of size 660x460 mm with a pair of 15

mm C.P. brass pillar taps with elbow

including operated levers

17.8 Providing and fixing white vitreous china Each 9.33 1683.35 15705.66

pedestal for wash basin completely

recessed at the back for the reception of

pipes and fittings.

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 4.67 349.15 1630.53

with flexible tube upto 1 metre long with

6 S.S. triangular plate to European type W.C.

of quality and make as approved by

Engineer - in - charge.

RANGIYA DIVISION-ENGINEERING/N F RLY

17.22B Providing and fixing CP Brass Single lever Each 3.12 6940.75 21655.14

telephonic wall mixer of quality and make

as approved by Engineer in charge.(a) 15

Providing and fixing P.V.C. waste pipe for

17.28 sink or wash basin including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

17.31 Providing and fixing 600x450 mm bevelled Each 13.33 1607.95 21433.97

edge mirror of superior glass (of approved

9 quality) complete with 6 mm thick hard

board ground fixed to wooden cleats with

C.P. brass screws and washers complete.

Providing and fixing mirror of superior glass

(of approved quality) and of required shape

17.32 and size with plastic moulded frame of

approved make and shade with 6 mm thick

hard board backing :

17.33 Providing and fixing 600x120x5 mm glass Each 9.33 1083.5 10109.06

shelf with edges round off, supported on

anodised aluminium angle frame with C.P.

brass brackets and guard rail complete

fixed with 40 mm long screws, rawl plugs

etc., complete.

17.34 Providing and fixing toilet paper holder :

17.56 Providing and fixing terminal guard :

17.71 Providing and fixing PTMT liquid soap Each 15.33 168.35 2580.81

container 109 mm wide, 125 mm high and

112 mm distance from wall of standard

shape with bracket of the same materials

with snap fittings of approved quality and

colour, weighing not less than 105 gms.

17.72 Providing and fixing PTMT towel ring Each 8.67 231.95 2011.01

trapezoidal shape 215 mm long, 200 mm

wide with minimum distances of 37 mm

from wall face with concealed fittings

arrangement of approved quality and

colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail

complete with brackets fixed to wooden

17.73 cleats with CP brass screws with concealed

fittings arrangement of approved quality

17.73.2 600 mm long towel rail with total length of Each 8.67 708.95 6146.6

16 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms.

17.78 Providing and fixing white vitreous china Each 15.67 14999.15 235036.68

extended wall mounting water closet of size

780x370x690 mm of approved shape

including providing & fixing white vitreous

17 china cistern with dual flush fitting, of

flushing capacity 3 litre/ 6 litre (adjustable

to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc

18.0 WATER SUPPLY

18.4S PP-R PIPES

RANGIYA DIVISION-ENGINEERING/N F RLY

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS:15801 UV stabilized & anti -

microbial fusion welded, having thermal

stability for hot & cold water supply,

including all PP - R plain & brass threaded

polypropylene random fittings, including

trenching, refilling & testing of joints

complete as per direction of Engineer-in-

Charge. External work

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings and fixing the pipe with clamps at

1.00 m spacing. This includes jointing of

18.8 pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and

making good the same including testing of

joints complete as per direction of Engineer

in Charge. Concealed work, including

cutting chases and making good the walls

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply

including all CPVC plain & brass threaded

18.9 fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints

complete as per direction of Engineer in

Charge. External work

C.I. SLUICE VALVES/ FIRE HYDRANTS &

Providing and fixing C.I. sluice valves (with

cap) complete with bolts, nuts, rubber

insertions etc. (the tail pieces if required

will be paid separately) :

18.31.1 100 mm diameter

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass bib cock of

approved quality conforming to IS:8931 :

Providing and fixing C.P. brass long nose

bib cock of approved quality conforming to

IS standards and weighing not less than 810

RANGIYA DIVISION-ENGINEERING/N F RLY

Providing and fixing C.P. brass stop cock

18.52 (concealed) of standard design and of

approved make conforming to IS:8931.

Providing and fixing C.P. brass angle valve

18.53 for basin mixer and geyser points of

approved quality conforming to IS:8931

19.0 DRAINAGE

19.1S STONE WARE PIPES AND FITTINGS

Providing, laying and jointing glazed

stoneware pipes class SP-1 with stiff

19.1 mixture of cement mortar in the proportion

of 1:1 (1 cement : 1 fine sand) including

testing of joints etc. complete :

Providing and laying cement concrete

1:5:10 (1 cement : 5 coarse sand :10

19.3 graded stone aggregate 40 mm nominal

size) up to haunches of S.W. pipes including

bed concrete as per standard design :

Schedule Schedule I-DSR-2023 Items for Road Work

Item- 1 Improvement of circulating area and other associated works related to soft upgrade

S No. Item No Description of Item Unit Qty Rate Amount

16.0 ROAD WORK

16.1S ROADS

16.1 Preparation and consolidation of sub grade Sqm 16000 218.9 3502400

with power road roller of 8 to 12 tonne

capacity after excavating earth to an

average of 22.5 cm depth, dressing to

camber and consolidating with road roller

including making good the undulations etc.

and re-rolling the sub grade and disposal of

surplus earth with lead upto 50 metres.

16.3 Supplying and stacking at site.

16.4 Laying, spreading and compacting stone cum 3200 1046.95 3350240

aggregate of specified sizes to WBM

specifications in uniform thickness, hand

picking, rolling with 3 wheeled

road/vibratory roller 8-10 tonne capacity in

stages to proper grade and camber,

applying and brooming requisite type of

screening / binding material to fill up

interstices of coarse aggregate, watering

and compacting to the required density .

16.49S MISCELLANEOUS

RANGIYA DIVISION-ENGINEERING/N F RLY

16.50 Providing and fixing Glow studs of size Each 600 206.3 123780

100x20 mm made of heavy duty body shall

be moulded ASA (Acrylic styrene

Acrylonitrile ) or HIP (High impact

polystyrene) or ABS having electronically

welded micro- prismatic lens with abrasion

resistant coating as approved by Engineer

in charge. The glow stud shall support a

load of 13635 kg tested in accordance with

ASTM D4280. The slope of retro- reflective

surface shall be 35 (+/-5) degress to base

.The reflective panels on both sides with at

least 12 cm of reflective area up each side.

The luminance intensity should be as per

the specification and shall be tested as

described in ASTM I: 809 as recommended

in BS: 873 part 4 : 1973. The studs shall be

fixed to the Road surface using the

adhesive conforming to IS, as per procedure

recommended by the manufacturer

complete and as per direction of Engineer-

Manufacturing, supplying and fixing retro

reflective sign boards made up of 2 mm

thick aluminium sheet, face to be fully

covered with high intensity encapsulated

type heat activated retro reflective sheeting

conforming to type - IV of ASTM-D 4956-01

in blue and silver white or other colour

combination including subject matter,

message (bi-lingual), symbols and borders

etc. as per IRC ; 67:2001, pasted on

substrate by an adhesive backing which

shall be activated by applying heat and

pressure conforming to class -2 of ASTM-D-

4956-01 and fixing the same with suitable

sized aluminium alloy rivets @ 20 cm c/c to

back support frame of M.S. angle iron of

size 25x25x3 mm along with theft resistant

measures, mounted and fixed with 2 Nos.

M.S. angles of size 35x35x5 mm to a

vertical post made up to M.S. Tee section

ISMT 50x50x6 mm welded with base plate

of size 100x100x5 mm at the bottom end

and including making holes in pipes, angles

flats, providing & fixing M.S. message plate

of required size, steel work to be painted

with two or more coats of synthetic enamel

paint of required shade and of approved

brand & manufacture over priming coat of

zinc chromate yellow primer (vertical MS-

Tee support to be painted in black and

white colours).Backside of aluminium sheet

to be painted with two or more coats of

epoxy paint over and including appropriate

priming coat including all leads and lifts

etc. complete as per drawing , specification

and direction of Engineer-in-charge.

16.59.1 Mandatory/ Regulatory sign boards of 900 Each 10 7183.35 71833.5

5 mm diametre with support length of 3750

16.59.2 Cautionary /warning sign boards of Each 10 5559.75 55597.5

equilateral triangular shape having each

side of 900 mm with support length of 3650

RANGIYA DIVISION-ENGINEERING/N F RLY

Manufacturing, supplying and fixing retro

reflective overhead signage boards made

up of 2 mm thick aluminium sheet, face to

be fully covered with high intensity and

encapsulated lens type heat activated retro

reflective sheeting conforming to type - III

of ASTM-D-4956-01 as approved by

Engineer-in-charge, letters, borders etc. as

per IRC : 67-2001 in silver white with blue

colour back ground and with high intensity

grade, pasted on substrate by pressure

sensitive adhesive backing which shall be

activated by applying pressure conforming

to class II of ASTM-D-4956-01 and fixing the

same to the plate of structural frame work

by means of suitable sized aluminium

16.60 alloys, rivets or bolts & nuts @ 300 mm

centre to centre all along the periphery as

well as in two vertical rows along with theft

resistant measures, including the cost of

painting with two or more coats of epoxy

paint in grey colour on the back side of

aluminium sheet including appropriate

priming coat. The rate includes the cost of

rounding off the corners, lowering down the

structural frame work from the gantry,

fixing and erecting the same in position all

complete as per drawings, specification and

direction of the engineer-in-charge.

(Structural frame work including M.S. plate

to be provided separately. Rectangular area

of the sheet only shall be measured for

7 16.60.1 Overhead informatory road signage Sqm 25 5879.9 146997.5

16.62 Providing and applying 2.5 mm thick road Sqm 720 747.8 538416

marking strips (retro- reflective) of specified

shade/ colour using hot thermoplastic

material by fully/ semi automatic

thermoplastic paint applicator machine

fitted with profile shoe, glass beads

dispenser, propane tank heater and profile

shoe heater, driven by experienced

operator on road surface including cost of

material, labour, T&P, cleaning the road

surface of all dirt, seals, oil, grease and

foreign material etc. complete as per

direction of Engineer-in-charge and

accordance with applicable specifications.

16.69 Providing and laying at or near ground level cum 15 10117.6 151764

factory made kerb stone of M-25 grade

cement concrete in position to the required

line, level and curvature, jointed with

cement mortar 1:3 (1 cement: 3 coarse

sand), including making joints with or

without grooves (thickness of joints except

9 at sharp curve shall not to more than 5mm),

including making drainage opening

wherever required complete etc. as per

direction of Engineer-in-charge (length of

finished kerb edging shall be measured to

calculate volume for payment). (Precast

C.C. kerb stone shall be approved by

Engineer-in-charge).

RANGIYA DIVISION-ENGINEERING/N F RLY

Providing and laying gang saw cut 30 mm

thick, mirror polished pre moulded and pre

polished machine cut granite stone of

required size and shape of approved shade,

colour and texture in footpath, flooring in

road side plazas and similar locations, laid

over 20mm thick base of cement mortar 1:4

(1 cement : 4 coarse sand) including

grouting the joints with white cement mixed

with matching pigment, epoxy touch ups

etc. complete as per direction of Engineer-

16.87.2 With granite stone of all colour except Sqm 75 5272.05 395403.75

10 black, cherry/ruby red of area less than

16.90 Providing and laying tactile tile (for vision Sqm 85 2017.6 171496

impaired persons as per standards) of size

300x300x9.8mm having with water

absorption less than 0.5% and conforming

to IS:15622 of approved make in all colours

and shades in for outdoor floors such as

11 footpath, court yard, multi modals location

etc., laid on 20mm thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) in all

shapes & patterns including grouting the

joints with white cement mixed with

matching pigments etc. complete as per

direction of Engineer-in-Charge.

Providing and laying factory made

chamfered edge Cement Concrete paver

blocks in footpath, parks, lawns, drive ways

or light traffic parking etc, of required

strength, thickness & size/ shape, made by

table vibratory method using PU mould, laid

in required colour & pattern over 50mm

thick compacted bed of sand, compacting

and proper embedding/laying of inter

locking paver blocks into the sand bedding

layer through vibratory compaction by

using plate vibrator, filling the joints with

sand and cutting of paver blocks as per

required size and pattern, finishing and

sweeping extra sand. complete all as per

direction of Engineer-in-Charge.

with approved color design and pattern.

Schedule Schedule J-DSR-2023 Items for Dismantling Work

Dismantling Work for Improvement of Facade, entry Porch, Waiting hall and other associated works

to soft upgrade.

S No. Item No Description of Item Unit Qty Rate Amount

15.0 DISMANTLING AND DEMOLISHING

15.1S General

Demolishing cement concrete manually/ by

mechanical means including disposal of

material within 50 metres lead as per

direction of Engineer - in - charge.

(including equivalent design mix)

Demolishing brick work manually/ by

mechanical means including stacking of

15.7 serviceable material and disposal of

unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

RANGIYA DIVISION-ENGINEERING/N F RLY

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

15.12 chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres

Dismantling steel work in single sections

15.17 including dismembering and stacking within

50 metres lead in:

15.29 Dismantling stone slab roofing over wooden cum 777.78 2664.65 2072511.48

karries or R.C.C. battens (dismantling

karries and battens to be paid for

6 separately), including stacking of

serviceable material and disposal of

unserviceable material within 50 metres

Dismantling manually/ by mechanical

means including stacking of serviceable

15.43 material and disposal of unserviceable

material within 50 metres lead as per

direction of Engineer-in-charge :

15.56 Dismantling old plaster or skirting raking Sqm 1555.56 54.65 85011.35

out joints and cleaning the surface for

plaster including disposal of rubbish to the

dumping ground within 50 metres lead.

Dismantling Work for Improvement of circulating area and other associated works related to soft

S No. Item No Description of Item Unit Qty Rate Amount

15.0 DISMANTLING AND DEMOLISHING

15.1S General

Dismantling manually/ by mechanical

means including stacking of serviceable

15.43 material and disposal of unserviceable

material within 50 metres lead as per

direction of Engineer-in-charge :

Schedule Schedule K-NS items

Item- 2 NS item for Improvement of circulating area and other associated works related to soft upgrade

S No. Item No Description of Item Unit Qty Rate Amount

1 1 Supplying, spreading and consolidating cum 2400.00 944.34 2266416.00

unscreened shingle (Ave. % of sand to

shingle is 50 : 50 & max. limit 60 : 40) for

road and other works as per direction of the

engineer or his authorised representative at

site, including all leads, lifts, descends &

carrying by truck, whereever necessaary,

arranged by the Contractor's at his own

cost including spreading in layers of 30cm

or less, levelling, dressing with

mechanical/manual compaction as per

given profile and as per N.F. Rly standard

specification & special condition corrected

upto date. The rate includes royalty,

monopoly, all taxes and other charges

complete in all respect. (N/S)

Item Breakup - A-DSR 2023 Items for Earthwork

Item Breakup - B-DSR-2023 items for Concrete Work (PCC & RCC)

Item Breakup - C-DSR-2023 items for Reinforcement & Steel Work

Item Breakup - D-DSR-2023 items for Masonry, Cladding & Finishing Work

Item Breakup - E-DSR 2023 items for Flooring Work