REPAIR/MAINT OF CERTAIN B/R WORKS AND E/M WORKS AT WSA IN TECH AREA AT AF STN GWALIOR

Amount

Demolition of cement concrete ( unreinforced) ground floors and pavings n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed complete all as specified and directed.

Demolition of cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for 100mm thick cement concrete type B-1. 1:2:4 (20mm graded aggregate) as in FLOOR/HARDSTANDING all as specified and directed.

M&L for pavement quality control concrete using crushed stone aggregate having minimum field flexural strength of 40 Kg/Sq Cm and characteristic compressive strength 40 N/Sqmm in pavement using non circular/triangular synthetic fibre @ 0.25% by weight of cement used laid to level, gradient and camber including necessary form work and laying of polythene under and side of concrete complete all as specified and directed. Note : Non circular / triangular fibre shall be measured and paid for seperately as supply only.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound.

M&L for 100 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for Sand/stone dust filling under floors to receive interlocking paver blocks incl consolidation complete all as specified and as directed.

Demolition of stone slabs and paver tiles of any description or thickness in floors, aprons etc laid in any type of mortar complete all as specified and directed.

M&L for 80 mm thickness Machine pressed precast concrete interlocking paver block any shape and size of M-40 Grade confirming to IS 15658-2006 with grey cement and no pigment incl dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed and complete all as specified and as directed.

Taking down existing steel doors of any description and in any position n exc 10 Sqm in size with complete fittings and fixture and refixing in the same opening after repairing/servicing/greasing & adjustment of hinge/wheel/wielding etc complete all as specified and directed. Note : including materials roller plate etc complete all as specified and as directed.

Dismantling of wrought iron and mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed work as in Sliding doors/ gates/danger boards of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including Cast iron wheel of any size, steel sheeting or other covering, running rails and guides and hanging; also fastening and fixing etc. conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed.

M & L for MS work as in swan neck / brackets etc for fencing post & strut in fencing etc including cutting tops to shape as directed, drilling holes, riveting for wires etc including all necessary drilled bolting or riveting etc and similar work conforming to Fe290 Gde E-165 complete all as specified and directed.

S & F in repair galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any type of standard hooks, including securing and tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and directed.

Tightening /restraining and resecuring of old existing barbed wire including making good staples etc in same position complete all as specified and directed .

Dismantling posts or struts (Wood, steel, or RCC) any section, including taking out embedded portion and making good disturbed ground, including any type fencing all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised 4mm dia (wt. not less than 4kg) fencing any size or type all as specified and directed .

S&F flat Iron, mild steel for securing chain link fencing, wind tie, welded to each other complete all as specified and directed by Engr-in-Charge.

S&F 12mm round bar for securing for securing chain link fencing, cutting, welded to each other complete all as specified and directed by Engr-in-Charge.

S&F of mild steel screw bolts (machine made) 10 to 15mm dia of neck and length exc 5cm but n' exc 10cm, with hexagonal or square heads at one end and screwed ends fixed with two washers and one nuts complete all as specified and directed.

S&F in repair concertina rozor wire coil 600 mm dia (cross type) hot dip galvanized steel wire of high tensile spring centre core wire, High carbon spring steel wire, heavy zinc coated in fencing work complete all as specified and directed.

S&F in repair concertina rozor coil 1000 /1050 mm (cross type) dia hot dip galvanized steel wire of high tensile spring centre core wire, High carbon spring steel wire, heavy zinc coated in fencing work complete all as specified and directed.

M & L Preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

Preparing New painted steel & iron surfaces of any description n.exc over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Demolition of brick work or stone boulders masonry built in cement mortar or cement lime mortar including all quoins arches pillars etc., but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

Description same all as per item No 30 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.

M&L for stone walling of random rubble masonry uncourse, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

All as per item above here-in-before but, except stone complete all as specified and directed. (Note :- Old retrieved stones obtained from demolition in serviceable condition shall be used in the work).

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses and all as specified and directed.

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses including Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses etc.

M&L for plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in surface channel etc complete all as specified made to shape and size as directed.

M & L for PCC (1:2:4) type B0, using 12.5mm graded stone aggregate as in coping including necessary form work complete all as specified and directed .

Extra for forming fair finish drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stooped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto

M&L for precast RCC (1:2:4) type B1 (using 20mm graded aggregate) as in shelves, cover slabs for manholes/drains etc set in cement mortar (1:6) including necessary form work etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately) under appropriate item of Sch ‘A’

S&F mild steel TMT bars of 10 mm dia and over cut to length, bent to shape as required including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for securing with clips complete all as specified and directed.

Taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering other than fare face of brick/stone masonry walls in CM 1:6 finished even and smooth without using extra cement all as specified and directed.

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement all as specified and directed.

M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emulsion (Make : APEX of Asian Paints or equivalent in Berger Paints etc) white or tinted by the use of rollers over a coat of putty as approved complete all as specified and directed.

M&L for Preparation of newly plastered surface and applying two coat of distemper oil emulsion white or tinted by the use of rollers over a coat of Putty as approved complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium door shutters with extruded built up standard tubular sections (using aluminium sec not less than 2 mm thick), fixing to frame including 5mm thick tinted glass at top panel and 4mm thick ACP sheet at bottom with rubber neoprene gasket and aluminium beading, 02 Nos 200mm Handle, 01 Nos 300mm long sliding door bolt and 02 Nos 15mm tower bolt to each shutter using C.P./ stainless steel screws, all as specified and directed.

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C21 complete all as directed and specified

S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as directed and specified

S&F for 150 mm long aluminium handles, cast type, anodised complete all as directed and specified

S&F for 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified

S&F in repair, door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.

S&F 100mm brass mortice lock 2 livers, vertical type complete all as specified and directed.

M&L for 600mm bore reinforced concrete pipes class NP-2 ,laid and jointed complete with collars complete all as specified and directed including dismantling of old RCC pipe& necessary excavation complete all as specified and directed..

M&L for concrete bed to drain pipe incl packing under and completely surrounding pipes with cement concrete 1:3:6 mix, type C-2(using 40mm graded stone aggregate)complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M&L for joint free coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 10 mm thick rendering/ backing coat in CM 1:4 all as specified and as directed.

M&L for 25mm th Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in subbase of floor/path complete all as specified and directed

M&L for non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. , laid over and including 15mm thick screed bed in cement mortar 1:6 , set, jointed in neet cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed.

S&F in repair 3 mm thick PVC tiles /sheets, laminated plain coloured, marbled mosaic or mottled finish laid with approved rubber based adhesive in floors including all cutting and waste and work in all position complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white oval type, size 550mmx400mm fixed over marble slab, including 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair brass CP wall mixer 15mm dia bore mixing hot & cold water for wash hand basin and kitchen sink screwed down for iron pipe and fixed.

S&F in repair PVC connection 15mm dia with Brass nuts of length 450mm etc complete.

S&F in repair 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete.

S & F in repair rotational moulded polye-thylene triple layer puff based water storage tanks of capacity 1000ltr (cylindrical vertical with closed top) hoisted and fixed in position including float valve 20mm dia including dismantling of old u/s water tanks all as specified and directed.

S&F in repair coloured vitreous china squatting pan Orissa pattern size 580 x 440mm white with P or S trap ,front & back inlet ,integral foot rest including flush pipe fixed in position and made serviceable complete all as specified and directed.

S&F in repair coloured vitreous china Urinal half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , PVC waste coupling and pipe complete all as specified and directed.

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60 Cm long between flanges including taking down of old PVC towel rail complete all as specified and directed.

S&F in repair coloured PVC low level flushing cistern 10 litres capacity with inlet 15 mm bore ball valve float and handle including 32 mm bore PVC flush pipe of required length complete all as specified and directed

M&L for 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl all necessary fitting including dismantling of existing Plain or corrugated steel/PGI Sheet complete all as specified and directed.

S&F MS tubular pipes as in vertical post , rafter & purlins as in sheds/canopy cut to reqd shape , welding drilling and including bending as necessary , gusset plates, riveting , etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed. Make: ISI Marked as approved by GE.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling of existing Plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Ridge, valley/ gutter fixed with self tapping screws including Dismantling of existing Plain or corrugated steel /AC Sheet complete all as specified and directed.

S&F in repair 75 mm internal bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls etc complete.

S&F in repair 75 mm internal bore of PVC (SWR) bends with access door any radius etc complete.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply only 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and as directed.

S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and as directed.

Surface dressing n exc 15 cm deep of filled earth over ORP and Blast pan & traverse walls complete all as specified and as directed.

S&F in repairs HDPE perforated GEO CELL mesh for slope protection of earth any shape with size (330-100mm) 1.50mm thick fixed to earth with necessary arrangements 'J' hooks & jointing clips including levelling & ramming earth to required gradient by using the existing traverse earth complete all as specified and directed. Make: Terrain Infratech, Geogical Structial Infra Pvt Ltd, Omega Construction etc.

Rough excavation by mechanical means not exceeding 1.50 m deep and getting out in soft/loose soil and Removing the excavated material exc. 1.50Km and upto total distance of 5 km and depositing where directed at a level n exc. 1.5 m above the starting point.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick and finishing to required size, shape, etc. up to a height of 8.0 mtr high from base complete all as specified and directed.

Cutting of all bushes ,grass and sarcandas, shrubs, vegetation etc including trees n'exc 30 cm girth and removing the material exc 500m and n exc 1 KM complete all as specified and directed.

Removal of existing roof treatment (brick tiles, screed plaster, & tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.

M & L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching,kerbs and levelling course etc over roof surface complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note: Water proofing compound shall be measured and paid separately under respective item of "BoQ")

Material and labour for application of 5 layer SHR waterproofing Coating System on leaking concrete surface by through surface preparation followed by one absorption coat of Thermacool WP51, Nano-tech modified, UV Resistant, elastomeric clear coat having min 50% solids, then overcoating with 2 coats of Thermacool WP51+ Cement mixture as water proofing coat having +450% elongation, Tensile strength min 2.2Mpa and then top coated with 2 coats of THermacool 0.3C pure acrylic based, UV resistant non alloying bio organism resistant (Antifungal, Anti bacterial) Solar IR heat reflective coating confirming to BIS Standard IS17218:2019 with pull of adhesion 2.8Mpa, passes 2000 hours accelrated durability test, Suitable for all types of cementitious surfaces, white colour, mat, surface coverage 3.25 Sqm per ltr/per 2 coat, DFT 100-120 microns using brush roller airless spray gun as applicable. The product should have been tested at IIT or NABL approved lab and application is to be done by Thermacool approved applicator only. Note: A guarantee for the same of 5 years will be submitted product comp[any as well as application against leakage/seepage painting work.

M&L for Preparation of old decorated surfaces of ceilings including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers and applying a coat with putty to make the surface even and smooth matching to the adjacent wall surfaces and applying two coats distemper oil emulsion by the use of rollers, over a coat of primer all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of distemper oil emulsion with Roller on wall surfaces including filling the cracks and depression with putty to make the surface even & smooth complete all as specified and directed.

M & L for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes of 12mm dia etc. in apron and all as specified and directed

M & L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and all as specified and directed

S&F 4mm thick HPSC pre-prime non asbestos fibre cement designer building board (E-classic ) decorative finish including E-grid suspended false ceiling grid system 600x600mm with main runner 33x24x0.6mm, cross tee 25x24x0.6mm and wall angle 19x22x0.4mm ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fasteners to RCC Roof or from purlin with butterfly clips hold down clips etc from soffit at approx 1.20mtr centre to centre complete all as specified and directed.

Excavating in post holes (or similar holes) in Hard/dense soil each n exc 0.5 cu. m, incl cutting PCC Up to 300mm and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing excavated material out of premises complete all as specified and directed..

Taking down carefully existing unserviceable flame proof point wiring of any description & in any height ( 4m to 16m ) position with and including existing conduit fixed on surface with and including existing junction boxes in between the point wiring complete, including making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: (i) Old existing junction boxes obtained in serviceable condition from taking down of point wiring shall be re-used in the work. (ii) Taking down / replacement of existing fittings like switches/sockets / switch fuses / tube light fittings etc. if any, shall be measured and paid for separately under appropriate item of Schedule `A'

Material and labour for flame proof point wiring for one light point or one socket point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable, 1100 volts grade in and including stove enamelled black, rigid steel conduits of size not less than 20 mm dia (Medium grade) fixed on surface of walls/ceilings any height ( 4m to 16m )as directed with all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core FRLSH, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly / fittings etc. complete all as specified and directed by Engineer-in-Charge. NOTE : (i) Old junction boxes retrieved in serviceable conditions shall be re-used in the work. However, additional junction boxes, if any required, for making new point wiring other than the quantity of junction boxes retrieved from taking down of point wiring, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A' but fixing element of any type of junction boxes new or old is deemed to be included in the rates quoted by the contractor for the above item. (ii) Wiring shall be terminated and connected to the relevant switch / controlling switch gear and relevant fittings / sockets all as directed and controlling switch / fittings shall be measured and paid for separately under appropriate item of Schedule `A'.

All as per item No.106 here-in-before but point wiring with using 2.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable for 16 A Flame proof Switch and socket complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof push button 10 Amps in LM 6 metal enclosures, conforming to make : Sudhir/Shyam/CG/Havells complete all as specified and directed

Supplying & fixing in replacement of flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 2 pole + earth suitable for 250 volts supply and current rating of 16 Amps complete all as specified and directed

Supplying & fixing in replacement of flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 2 pole + earth suitable for 250 volts supply and current rating of 25/32 Amps complete all as specified and directed

M&L for sub main wiring in repair concealed using Four single core PVC insulated, FRLSH, stranded copper conductor cable any height ( 4m to 16m ) of size 4 Sqmm for sub main wiring, along with one run of 4Sqmm PVC insulated, FRLSH, Stranded copper conductor cable for earth continuity conductor in steel conduit complete all as specified and directed Note: Four run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit.

All as per item No. 111 here-in-before but using Two single core, 2.5 Sqmm copper conductor cable and with earth continuity conductor. Note: Two run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit.

All as per item No. 111 here-in-before but using Two single core, 1.5 Sqmm copper conductor cable and with earth continuity conductor. Note: Two run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit.

Supply & replacement of flame proof distribution board 8 way single pole & neutral in LM-6 metal enclosures with and including 01 No MCBs, 2P, 32 Amps - 01 No & 06 Nos MCB single pole 6 Amps `C’ series with complete internal bus bar & wiring up to terminal all as specified and directed.

Supply & replacement of flame proof distribution board 4 way single pole & neutral in LM-6 metal enclosures with and including 01 No MCBs, 2P, 16/25 Amps - 01 No & 02 Nos MCB single pole 6/10 Amps `C’ series with complete internal bus bar & wiring up to terminal all as specified and directed.

Supply & fixing in replacement flameproof distribution board 4 way Triple pole & neutral in LM-6 metal enclosures with and including 01 No MCB, 4P, 63 Amps as Incoming & Out going MCB, 1P, 6 Amps - 12 Nos with complete internal bus bar & wiring up to terminal all as specified and directed.

Supply & fixing in replacement FLP Flexible metelic Hose conduit M20/3/4ET 300 mm long complete all as specified and directed.

Supplying and fixing flame proof junction box 3 way ¾ “ (100 mm dia) entry in LM – 6 complete all as specified and directed.

Supply & fixing in replacement of flame proof FLP Flood light 60 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed.

Supply & fixing in replacement of flame proof FLP Flood light 70 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed.

Supply & fixing in replacement of flame proof FLP Flood light 90 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed.

Supply & fixing in replacement of flame proof FLP Flood light 120 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed.

M/S NIRMAL SINGH DHANJAL

M/s. Ravi and brothers

M/s Kishan Construction Company

Sunil Traders

M/S Amit Traders

M/s Dinesh Kumar

M/S Pramod Kumar Jain

M/s United Construction Company