PROVN OF TOILET BLOCK WITH SEPTIC TANK AND RETAINING WALL FOR WKSP AREA AT LEBONG UNDER AGE I DARJEELING

Amount

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and as directed.

M&L for Excavation in Trenches, not exc. 1.50 Metre wide and not exc 1.50 Metre in depth for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.

M&L for Excavating over areas, n exc 1.5 m deep and getting out in Soft/Loose Soil, complete all as specified and as directed.

M&L for Excavating over areas, exc 1.5 m but n. Exc. 3.0 m deep and getting out in Soft/Loose Soil, complete all as specified and as directed.

M&L for rough Excavation, n exc 1.5 m deep and getting out in Soft/Loose Soil, complete all as specified and as directed.

M&L for Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

M&L for Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L for Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, Foundation of Pole etc. including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation in layers, complete all as specified and as directed.

M&L for Hardcore with broken stones/ boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for Brick Work with Fly Ash Bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L for Cement Concrete 1:3:6, type B-2 (40mm graded aggregate), 75mm thick as in sub-base of floor, path, plinth protection etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Brickwork with Fly ash bricks in One brick thick (Old Size Bricks) honey comb walling, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L for walling of stone masonery random rubble uncoursed solidly hearted and well bonded, bedded with necessary weep holes and built in CM 1:6 all as specified and as directed.

M&L Cement Concrete 1:3:6, type C-1 (20mm graded aggregate) as in Coping, edging, Bond stone, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and as directed.

S&F of 110 mm bore (dia) PVC (SWR) pipes single socketed, in any length as in weep holes, complete all as specified and as directed. MAKE- Prince/ Kisan/ Supreme

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses, with cement morter 1:4, complete all as specified and as directed.

M&L for Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.

M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.

M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed bed will be measured to paid seperately.

M&L for Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L Chequered Cement Concrete Coloured Tiles 300x300x25mm thick in Floors, etc., set, jointed and pointed in Neat Cement Slurry in Floors with Grey Cement and no Pigment, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L for Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., plastered surfaces finished Even and Fair, complete all as specified and as directed.

M&L for Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Fair, complete all as specified and as directed.

M&L for Rendering (Externally) 15mm thick in Cement Mortar 1:4 in two layers on Brick Walls/Concrete Surfaces, 5mm thick top layer mixed with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid as ‘Supply only’ under relevant Item.

Supply only Integral Water Proofing Compound (WPC), conforming to IS-2465:1975 and as approved, complete all as specified and directed. MAKE- Sika/ Dr. Fixit/ Asian Paints/ Berger Paints

S&F of Solid PVC Door Frame of size 50x47mm made out of 5.0mm plain colour PVC Sheet reinforced with Mild Steel Square Tube, and fixing in Opening as per Specifications and Drawing, complete all as specified and as directed. MAKE- RAJSHRI PLASTIWOOD/ DUROPLAST/ SYNTEX/ POLYWOOD

S&F of Factory Made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/ sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed. MAKE- RAJSHRI PLASTIWOOD/ DUROPLAST/ SYNTEX/ POLYWOOD

S&F of Mild Steel Butt Hinge of size 100mm long (medium weight) and fixed with screws, complete all as specified and as directed. MAKE-CROWN/MOWJEE/EVERLITE/ UNIVERSAL OR ANY ISI MARKED

S&F of Aluminium anodised Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed. MAKE-CLASSIC/ CROWN/PIONEER/IPSA OR ANY ISI MARKED

S&F of Aluminium Alloy Handle 125mm long Febricated type, Extruded Section and fixed, complete all as specified and as directed. MAKE-CLASSIC/ CROWN/PIONEER/IPSA OR ANY ISI MARKED

M&L for Reinforced Cement Concrete, M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Item.

M&L for Reinforced Cement Concrete, M-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Item.

M&L for Reinforced Cement Concrete, M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Item.

M&L for Reinforced Cement Concrete, M-25 (Design Mix) as in Columns, pillars, piers, posts and struts, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Item.

M&L Pre-cast Reinforced Cement Concrete (nominal mix) 1:2:4 (20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:4 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

M&L for TMT Bars 8-10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for TMT Bars 6-10mm dia, cut to length, bent to shape required, as in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished concrete surfaces, complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished concrete surfaces, complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., rough finished concrete surfaces, complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished concrete surfaces, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. MAKE- Berger Paints/ Rajasthan/Snowcem

M&L for preparing newly Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of Alkali resistant Primer, complete all as specified and as directed. MAKE- Berger Paints/ Asian Paints/ Nerolac Paints/ Shalimar Paints

M&L for preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed. MAKE- Berger Paints/ Rajasthan/Snowcem

M&L for preparing new Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed. MAKE- Berger Paints/ Asian Paints/ Nerolac Paints/ Shalimar Paints

S&F Steel Ventilator with Top hung Shutter including Hinges, Steel Peg Stay, complete all as specified and as directed. MAKE- TATA or any ISI Marked

S&F Sheet Glass, froasted type, 3.0mm thick, Square or Rectagular, area not exc. 0.50 Square Metre in Each Pane and fixing to wooden/steel Shutters, etc. with oil putty or beading, complete all as specified and as directed. MAKE- Saint-Gobain/ Modi Guard/ Atul

S&F of Bib Tap 15mm bore (dia), Cast Copper Alloy with Crutch or Butter-fly Handle, Fancy type, chromium plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F of Stop Valve 15mm bore (dia), Cast Copper Alloy, Chromium Plated, (Consealed Type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F of Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F of 15mm bore (dia) GI tubing 'medium grade' galvanised with all fittings fixed to wall, ceiling or laid in floors complete all as specified and as directed. MAKE- Jindal/ TATA/ Bansal/ Prakash Surya

S&F of 20mm bore (dia) GI tubing 'medium grade' galvanised with all fittings fixed to wall, ceiling or laid in floors complete all as specified and as directed. MAKE- Jindal/ TATA/ Bansal/ Prakash Surya

M&L for broken bricks Loose filling with aggregates of gauge 63 to 100 mm in soakage pits, soakage wells, sunken floor, etc., complete all as specified and as directed.

S&F of cast iron floor trap 100mm dia with grating incl jointing to waste pipe in cement concrete 1:2:4 type B-1 complete all as specified and as directed. Make- BIC/ Electrosteel/ TATA or ISI marked

S&F of 100mm dia spun pipes,Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed. Make- BIC/ Electrosteel/ TATA or ISI marked

S&F of 100mm dia cast iron bend of any redius with oval access door, complete all as specified and as directed. Make- BIC/ Electrosteel/ TATA or ISI marked

S&F of 100mm dia cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed. Make- BIC/ Electrosteel/ TATA or ISI marked

S&F of 100mm dia cast iron vent cowl, complete all as specified and as directed. Make- BIC/ Electrosteel/ TATA or ISI marked

S&F of 100mm dia cast iron P or S trap with vent horn, complete all as specified and as directed. Make- BIC/ Electrosteel/ TATA or ISI marked

S&F of Shower rose suitable for 15mm bore (dia) connection, Cast Copper Alloy with Crutch or Butter-fly Handle, Fancy type, chromium plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F of Vitreous China White Squatting Pan (Orissa Pattern) of size 630x450 mm with integral foot rests, 'P' or 'S' Trap and (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F of PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F Vitreous China Wash Hand Basin 630x 450mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F of Flexible Waste Pipe 32 mm bore dia (bore) 90 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed. MAKE- Polytuf/ Prayag/ ISI marked

S&F of PVC Connection Pipe 15mm size with PTMT Nuts of length 600mm, complete all as specified and as directed. MAKE- Polytuf/ Prayag/ ISI marked

S&F of Vitreous China White Urinal Bowl type (Back or Corner Wall type), 465x355x265mm (minimum) with Grating and Union for Discharge Pipe (excluding Flushing Cistern, Flush Pipe and Waste Pipe) including providing and fixing Plugs, bedding Urinal against Wall in Cement Mortar 1:2, securing Urinal to Plugs with and including 60mm long Brass Screws, pointing around Urinal back in Cement and fixed, complete all as specified and as directed. MAKE- Somany/ Prayag/ Hindware/Jaquar

S&F of Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and as directed. MAKE- Polytuf/ Prayag/ ISI marked

M&L for providingAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed surface by forced application, complete all as specified. MAKE- STP/ Asian Paints/ Sika/ Berger Paints

S&F of Rotational Moulded Polyethylene Water Storage Tank 1000 Litre capacity (Cylindrical Vertical with Closed Top), 3 layered, hoisted and fixed in position with and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 142gm), all as specified in MES Schedule Part-I, complete all as specified and as directed. MAKE- For Water Tank- Sintex/ Polycon/ Supreme, For Ball Valve- Polytuf/ Prayag/ ISI marked

S&F of 20 mm bore (dia), gun metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778, complete all as specified and as directed. MAKE- ZOLOTO/ L&T/ KIRLOSKAR/ VENUS/ UPADHAYA

M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) Bed to Drain Pipe 150mm bore (dia) including Packing under and Haunching against the Sides of Pipes after they are laid in trenches and tested, complete all as specified and as directed. NOTE : Necessary Earthworks will be measured and paid for separately under appropriate Items.

M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) Bed to Drain Pipe 100mm bore (dia) including Packing under and Haunching against the Sides of Pipes after they are laid in trenches and tested, complete all as specified and as directed. NOTE : Necessary Earthworks will be measured and paid for separately under appropriate Items.

M&L Salt-Glazed Stoneware Drain Pipe 150mm bore (dia), Grade ‘A’, laid in Trenches jointed with Cement Mortar 1:1 and Testing, complete all as specified and as directed. NOTE : Necessary Earthworks will be measured and paid for separately under appropriate Items. MAKE- ISI Marked

M&L Salt-Glazed Stoneware Drain Pipe 100mm bore (dia), Grade ‘A’, laid in Trenches jointed with Cement Mortar 1:1 and Testing, complete all as specified and as directed. NOTE : Necessary Earthworks will be measured and paid for separately under appropriate Items. MAKE- ISI Marked

M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Surface Channels and Drains, Manholes etc. including use and waste Formwork as ordered, complete all as specified and as directed.

M&L Extra forming Fair Finished to Drains or Channels 30Cm inner girth in Cement Concrete surfaces using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.

Add to or Deduct from Item No. 79 here-in-before for Every 25mm Girth or Part thereof Over or Under 30 Cm, complete all as specified and as directed. Note:- Quantity of this item shall be changed as per site requirement.

S&F of 110 mm bore (dia) PVC (SWR) pipes single socketed, in any length fixed to walls, complete all as specified and as directed. MAKE- Kisan/ Prince/ Supreme

M&L for Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated FRLSH unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing & Caping of suitable size and its Accessories such as Elbow, bends, junction boxes, saddles and screws and rawalplug etc on Wall, Ceiling, mounted including PVC insulated FRLSH unsheathed single core multi-stranded Copper Conductor Cable of size 1.5 Sqmm Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light/ Fan/ Bell Point controlled by One 1-Way Switch/ Bell push of 5 Amp, complete all as specified and as directed. MAKE- Wiring Cable- Polycab/ Havells/ KEI/ Finolex & Casin-n-Capping- Press-Fit/ Plaza/ Presto-plast/ Ajanta

All as per Item no 82 here-in-above, but wiring with 2.5 Sqmm Copper Conductor for One Socket outlet of 3/5 Pin, 15/16 Amp on Independent Board, complete all as specified and as directed.. MAKE- Wiring Cable- Polycab/ Havells/ KEI/ Finolex & Casin-n-Capping- Press-Fit/ Plaza/ Presto-plast/ Ajanta

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. MAKE- Anchor/ Havells/ Legrand/ L&T

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5/6 Pin, 15/16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. MAKE- Anchor/ Havells/ Legrand/ L&T

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. MAKE- Anchor/ Havells/ Legrand/ L&T

S&F of surface and wall mounted LED 8/10 Watts tube light fitting batten (2 Feet) (Decorative type) with Polycarbonate housing & integrated electronic driver, 6500K, 240 Volts, complete with all accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- DMLN1LT8-8/ Cat No.- LUMILINEBS10WLED865SPCWH of make HAVELLS

S&F in-repair surface and wall mounted LED 8/10 Watts tube Rod (2 Feet) with very high efficiency, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- LTT8-8/ Cat No.- PHOTONULTRAE2.0603T8SSTL10WLED865SPC of make HAVELLS.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium housing IP 66 building security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35/36 watts with pre wired and lens embedded PC cover having Bottom opening seperate driver compartment and Impact resistance of IK08 with necessary mounting arrangements, complete all as specified and as directed. CAT No.- LSTS-36-CDL-M of Make- CROMPTON GREAVES/ CAT No.- ENXT P 36L WH CR PC SD of make BAJAJ/ CAT No.- BRP046 LED 36 CW MR S1 PSU GR of make PHILLIPS/ CAT No.- ENDCITYLITEPLAT+SL36WLED757PASYBOPCWOSPD of make HAVELLS

S&F of Sheet Metal Enclosure MCB DB SPN, 4 way 240 volt, with rated Bus-bar, Double door type (Metal Door) MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and as directed. Make of DB- Legrand/ L&T/ Schneider/ Siemens

S&F of MCB Single Pole & Neutral (SPN), 'C' Curve,40 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB SPN 40 Amps Legrand/ L&T/ Schneider/ Siemens

S&F of MCB Single Pole (SP), 'C' Curve, 6 to 32 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB 6 to 32 Amps Legrand/ L&T/ Schneider/ Siemens

S&F of metal body, heavy duty Ventilating Fan of 300mm Sweep AC Single Phase 230 Volts, fixed in wall with necessary suitable cutting of hole and making good the distrubed surface areas and matching with existing colour of wall including provision of 0.5Sqmm 2 Core PVC insulated, unsheated multistranded copper conductor from Celing Rose to Fan Terminal, complete all as specified and as directed. Make:- Havells/BAJAJ/USHA/ ORIENT

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6.0 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete all specified and as directed.

M&L for Cutting and Screwing in existing 15mm dia steel tubing for alterations or additions or lengthening screw on pipe to form connector, in same position without taking down, complete all as specified and as directed.

Supply, install and testing of ISI marked metalic body BEE 5 star rated water heater storage type, vertical, electrically operated single phase 50Hz, 2KW, of 25 Ltr capacity with Anchor fastner-04 Nos. of suitable size, including necessary drilling, fixing arrangements, with and including provision of PVC Connection pipe of 450mm long (02 Nos), complete all as specified and as directed. Make- Havells, Model- Monza DX (White), Cat No.- GHWAMGTWH025/ Make- BAJAJ, Model- Caldia (white) / Make-V-GUARD, Model- Victo Plus (White)/Make-RACOLD, Model- CDR Dlx Plus (White)/ Make- Vanus, Model- Magma Plus

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be measured and paid for.

Supply & laying locally available, well burnt Sub-class ‘B’ Bricks/ Fly Ash bricks of size 250x125x75mm (± 8% tolerance), laying perpandicular to UG Cable laid in trenches over Sand Cushion as Cable Protection, complete all as specified and as directed.

Supply & laying of LT XLPE Cable, sheathed PVC insulated, screened, PVC bedded, Galvanised Steel Strip or Wire armoured, Electic Power Cable (heavy duty) with Aluminium Conductor, 1100 Volts grade, cross-sectional area 10.0 Sqmm 2.0 Core, laid in Pipe/ Ducts/ Trenches/ under Floor/ under Road/ above floor/ fixing on poles including and Testing, complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. MAKE:- KEI/POLYCAB/ HAVELLS/ FINOLEX/ RR KABEL

KWOK YING CHIU

M/S TSHERING BHUTIA

Damdoo Bhutia

SANJAY KAUSHIK

M/S S. S CHETTRI AND SONS

BIMAL BHATTRAI

RAI CONSTRUCTION