MAINT/ REPAIR OF ALUMINUM DOORS WINDOWS FALSE CEILING TILING PAVING BLOCK ROOFING ETC AT ECHS SKIN DEPOT AND BASE HOUSE OF AGE EM (HOSP) UNDER GE (E/M) LUCKNOW

Amount

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M & L for PVC Wall panelling/Lining consisting of 5mm thick Plain/wood colour PVC sheet as approved inclusive of solvent cement and fixing at site on PVC frame including complete fixing arrangments on wall complete all as per manufactures specifications.

M & L for providing and fixing of E-board make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section/Angle sect

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats complete all as speci

Taking down chowkhats or frame (wooden/aluminium) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit all as specified and directed.

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each all as specified and directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as per specn & drg

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside with

Repairing of existing aluminium door single/double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 3-5 mm glass and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate

Repairing of existing toughend glass door single leaf including oiling and greasing of floor springs,replacement of hinges,handle,lock of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 12 mm glass and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall not be measured & paid seperately it includes the rate of floor spring also)

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of minimum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size of brass body

S &F aluminium partition with pre-laminated particle board at bottom panel and 4.8mm thick glass on top panel incl glazing clip and neosprene rubber beading as as specified and directed by EIC

S &F aluminium partition with 3mm thick aluminium composite panel at bottom panel and 4.8 mm thick glass on top panel incl glazing clip and neosprene rubber beading as as specified and directed by EIC

S &F 3mm thick aluminium composite panel with aluminium frame and shtter in door incl glazing clip and neosprene rubber beading as as specified and directed by EIC

S &F 3mm thick aluminium composite panel with glazing clip and neosprene rubber beading as as specified and directed by EIC

S&F Aluminium grill not less than 3.13 Kg per sqm fixed with frame in windows/ventilator all as specified and as directed at site.

S&F Powder coated aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , Single/double leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness complete all as specified and as directed.

Repairing of existing UPVC door single/double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle, lock,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 3-6 mm glass and making the door and shutter serviceable complete all as specified.(any items required regarding repair where renewed shall not be measured and paid separately.)

S&F power coated anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 2 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes complete all as specified and as directed

S&F powder coated anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and as directed

S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt complete all as specified.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring

S & F Neosprene rubber beading including taking down old rubber beading as in aluminium window and door shutter

S&f for 12 mm thick toughned glass odinary qulity and glazing with neosprene beading, SS clip or cleats of any size any postition

S&F 30 mm th Ist class hard hood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhat all as specified

M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level).

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

S & F 6 to 8 mm TMT bars in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips.

M&L TMT 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming Fe- 500.

PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping, chajja, facia and the like including weathering, slightly rounded or chamfered angles with & incl necessary use and waste of form work for fair faces of concrete

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore complete all as specified

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs,and incl cleaning and removing all scale and dirt, etc from tank and from mouths of circulating pipe etc and hoisting reconnecting and re-fixing in position capacity of tank exc 250 & n exc 500 litresall as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs,and incl cleaning and removing all scale and dirt, etc from tank and from mouths of circulating pipe etc and hoisting reconnecting and re-fixing in position capacity of tank exc 500 & n exc 1000 litres all as specified.

Dismantling water tank capacity exc 250 & n.exc 500 ltr and taken as credit

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres

Dismantling water tank capacity exc 500 & n.exc 1000 ltr and taken as credit

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 1000 litres

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210gms) complete all as specified.

S&F in repairs Chromium plated fancy long body Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified

S&F in repair cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe).

S&F in repairs Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union complete all as specified .

S&F in repairs Chromium plated ,Concealed stop cock Reduced body ISI Marked, , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe

S&F in repairs PTMT( Polytetra Methyllene Terephthalate )Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified .

S&F in repairs CP Angle stop cock( single way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed C complete all as specified .

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia NT/ FT complete all as specified.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified.

S&F in repair vitreous China wash down water closet pan ( padestal pattern Water Closet ) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete incl

S&F in repairs VC WHITE Squatting pan ,'Orissa' pattern size 580x440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphon

S&F in repairs Low level flushing cistern, moulded from virgin poly propylene complete all as specified and directed.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum), with grating and union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe) , fixed in repairs including connections to flushing pipe and outgoing

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting

S&Fin repair 32mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified.

M&L in repairs 32 mm waste fittings , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified fixed

S&F in repairs 32 mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified.

S&F in repair Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.

S&F Gun metal, in repair globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified.

Excavating in post holes each not exc. 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and depositing where directed

M&L for PCC 1:4:8 type D-2 as in foundation and mass concrete using 40 mm graded stone.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F steel work in tubular trusses/posts including special washers etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240

M & L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Grade Fe- 290 (Gde E- 165) complete all as specified.

M&L for preparing new steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling of roof sheet (any descriptions) including ridges in roof covering all as specified and directed.

S&F in repair Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 2mm thick fibre glass reinforced transclucent corrugated sheeting with two corrugations side lap fixed with L type or J- type or cranked hook bolts and washers in roof, wall etc complete.

M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate ) as in roof kerbs /padding or similar work or mud stops rounded or chamferred on edges.

M&L in repairs hand shower all as pecified and as directed including fitting to 15mm bore GI pipes.

M&L in repairs overhead shower all as pecified and as directed including fitting to 15mm bore GI pipes.

S& F in repairs 15mm dia single lever wall mixer with Hand shower complete all as specified.

S&F in repairs 15mm two way Bib cock with wall flange all as specified.

M&L in repairs single towel rail 600mm long all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed in CM 1:6 (Note : Screed bed will not be measured and paid separately)

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed in CM 1:6 (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 15 mm thick screeding in CM 1:6 (Note : Screed bed will not be measured and paid separately)

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10mm thick screed in CM 1:3

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20mm thick in cement mortor 1:4

M&L 6-10mm thick wall tiles in repairs Duracrete as invertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3.

M&L for exterior grade outdoor coloured floor tiles in repair (heavy duty) of tactileseries of size 300x300x10mm bedded over and including 20mm thick screed bed in CM 1:6 and jointed in cement mortar to match the colour of floor complete all as specified and directed.

M&L for 100 mm thick PCC type B-2 ( 1:2:4)( 40mm graded agg) finished even and smooth with using extra cement all as specified and as directed.

Demolation of Stone slabs and tiles laid dry of any description or thickness in floors, aprons etc all as, specified

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in CM 1:4 finished fair & even without extra cement, all as specified

M&L for rendering 15 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even

M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

M & L for acrylic polymer-modified cementitious high performance coating (two component) with high solid content and can be used for both side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which resist up to 5 bars of positive hydrostatic pressure and form highly elastic film which provides elengation up to 100 as per manufactures instructions complete all as directed. (Product of Asian paint or equivalent) (Note:- Work to be carried out by the authorised applicators of manufactures only)

M&L for preparing surfaces, plastered or unplastered new surfaces of ceiling and applying three coats white wash all as specified and directed.

Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 3mm wall care putty.

M&L applying two coats of exterior emulsion paint over newly plastered surface including preparation of wall surface complete all as specified and directed by EIC.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified.

M&L applying one coats of plastic emulsion paint interior quality any shade over old painted surface including preparation of wall surface complete all as specified and directed by EIC.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work

M&L 18-20mm thick machine cut Kota stone slab flooring with marble stone strips/ slab/ tiles as per design approved, over and including cement screed bed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing (Note : Screed bed will not be measured and paid separately)

M&L 18-20mm thick machine cut Kota stone slab as in skirting /riser over cement screed bed 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing (Note : Screed bed will not be measured and paid separately)

Demolition of existing roof treatment of any type

M & L 15mm thick screed plaster on RCC slab CM 1:4 with using water proofing compound @ 3% by weight of cement.( WPC to be measured and paid separately)

M & L for water proofing treatment on roof surfaces in the following manner:- (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (b) supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg/sqm. (c) Applying one coats of aluminium paint

M/S CLASSIC ENTERPRISES (BID ID -3089149)

Sanjay Traders (BID ID -3088849)

M/s Bapujee Builders and Traders (BID ID -3087668)

M/s Highway Construction (BID ID -3086573)

ARORA BROTHERS (BID ID -3088329)

M/s Vatsh Raj and co (BID ID -3089042)

ms singh construction (BID ID -3088540)