Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC Successful bidder | |
| 2 | L2₹28.8 L+₹19,795 (0.69%)Rejected-Finance NO 16 TULASA NIWAS GANESH NAGAR SAMBRA BELAGAVI 591124 | BELAGAVI | BELAGAVI | KARNATAKA | 591124 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹29.3 L+₹70,898 (2.48%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹29.5 L+₹91,270 (3.19%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹29.8 L+₹1.2 L (4.23%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
5 Jun 2023, 6:00 pmClosed
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
REPAIRS TO SEEPAGE TREATMENT SUNKEN FLOOR PLASTERING WORK AND MISC REPAIRS TO PERMANENT BLDG MUTUGA CAMP MES COLONY TILAKWADI AT AFS SAMBRA
2023_MES_592044_1
8774/E8
Open Tender
Civil Works
Item Rate
270 days
Belgaum
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF Sambra
₹60,000
Yes
15 Jul 2023
29 Apr 2023
7 Jun 2023
29 Apr 2023
5 Jun 2023
29 May 2023
Amount
Demolition of plain cement concrete of any description and in any position over RCC roof complete all as specified and as directed.
M & L Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregates as in average 50 mm thick padding/levelling course concrete complete all as specified and as directed.
M & L Cleaning existing roof surfaces and brushing with neat cement slurry @ 3Kg/Sqm, finishing smooth complete all as specified and as directed.
M & L Rendering 10mm thick cement mortar 1:3, mixed with conplast-X 42 11 C fosroc Chemical (India) Ltd @100 ml per bag of cement all as per manufacturers instructions on roof concrete surface and making the surface even and smooth as in required slope for draining out the rain water complete all as specified and as directed. Note : Conplast-X 42 11C of FOSROC chemical shall be measured and paid seprately.
Supply only conplast-X 42 11C FOSROC chemical India Ltd complete all as specified and as directed.
M & L Preparing RCC roof slab by removing dust, dirt and applying oil bond bituminous primer @ 0.2Kg/Sqm and providing APP modified water proofing membrane weighting not less than 4 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gms/sqm including minimum 10cm side over laps and 15cm end lap torch sealed and bonded as specified & directed and applying a coat of blown hot bitumen 95/15 over a membrane at 1.20 kgs/sqm all as per detailed specification and procedure after drying apply a coat of solar reflective bituminous aluminium paint over membrane at 0.10 kg/sqm all as specified and as directed.
Removal of concrete and plaster debris to a distance exceeding 1.5KM but not exceeding 5.00KM and depositing where directed complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and as directed.
Dismantling floor hearth/ wall tiling including cement mortar bedding (but not backing) and removing tiles & rubbish off the premises complete all as specified and as directed.
M & L PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.
M & L Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as padding in sunken portion using liquid water proofing compound complete all as specified and as directed. NOTE: Water proofing compound shall be measured & paid separately.
M & L rendering 15 mm thick cement mortar 1:4 on brick/ concrete surfaces in mixed with liquid water proofing compound in sunken portion finished even and smooth without using extra cement complete all as specified and as directed. Note:- Water proofing liquid Shall be measured and paid seperately.
Supply only liquid water proofing compound of approved make complete all as specified and as directed.
M & L for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours complete all as specified and as directed.
M & L for applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer 'ARMOUR CRETE' of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour -crete : cement : silica sand) or 'POLYCRYL' of Green boro polychem pvt ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours complete all as specified and as directed.
M & L Plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in 25 mm thick sub-floors, sub-bases, floors and pavings, etc. to receive the floor tiles complete all as specified and as directed.
M & L Non skid ceramic tiles, coloured, 7 to 8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement with pigment to match the floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M & L Non skid ceramic tiles, coloured, 7 to 8mm thick (square or rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm set and jointed in neat cement slurry and pointed in white cement with pigment to match the floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M & L Glazed ceramic tiles, coloured, 300mm x 200mm size, 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, as in vertical surfaces such as dado/ skirting, etc., over and including backing coat of 10mm thick cement mortar 1:4 complete all as specified and as directed.
Taking up or down 20 mm dia steel GI/PVC tubing and connections fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Taking up or down 25 mm dia steel GI/PVC tubing and connections fixed to walls and ceilings or laid in floors complete all as specified and as directed.
S & F 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors/roofs complete all as specified and as directed.
S & F 25 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors/roofs complete all as specified and as directed.
Disconnecting existing water tanks of capacity 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and fixed in position complete all as specified in SSR part I and as directed
Disconnecting existing water tanks of capacity exc 500 ltr but not exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and fixed in position complete all as specified in SSR part I and as directed
S & F in repairs 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and as directed.
S & F in repairs 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 455 gms) complete all as specified and as directed.
Demolition of brick work or block masonary built cement mortar complete all as specified and as directed.
M & L Pre cast cement concrete 1:3:6 type C1 using 20 mm graded stone agrregate as in solid block masonry exceeding 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in 75mm thick plinth protection finished even and fair without using extra cement complete all as specified and as directed.
Demolition of cement concrete in roofs/ floors (other than ground floors) beams staircases , landing chajjas and similar suspended work complete all as specified and as directed.
M & L Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, Chajjas rounded or chamfered on edges including necessary form work complete all as specified and as directed.
S & F in repairs 15mm dia bore Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.
Supply & fix in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.all as specified and as directed.
Supply and fix in repairs toilet paper holder of stainless steel fancy type fixed to walls with chromium plated brass screws complete all as specified and as directed.
Supply & fix in repairs PVC low level flushing cistern with syphonic action type 10 Ltr capacity including flange valve handle, bracket, with inlet, ball valve, float, PVC flush down pipe with bend complete all as specified and as directed.
Supply & fix in repairs PVC connection 15 mm dia with PTMT nuts of length 450 mm complete all as specified and as directed.
S & F in repairs PVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S & F in repairs PVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints, fixed to walls including clamps complete all as specified and as directed.
S & F in repairs PVC SWR pipe 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S & F in repairs PVC SWR pipe 110 mm bore single socketed in any length with rubber ring joints, fixed to walls including clamps complete all as specified and as directed.
Supply & fix in repairs 75 mm dia bore PVC (SWR) bend of any radius complete all as specified and as directed.
Supply & fix in repairs 110 mm dia bore PVC (SWR) bend of any radius complete all as specified and as directed.
Supply and fixing in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F in repairs 110mm dia PVC (SWR) Floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm and not exc. 2 sq. m each complete all as specified and as directed.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and as directed.
S & F Aluminium, anodised, barrel tower bolts of extruded section 150mm size complete all as specified and as directed.
S & F Butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and as directed.
S & F Aluminium handles, 150mm long cast type, anodised complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M & L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished the surface even & smooth without using extra cement complete all as specified and as directed.
M & L Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Preparing New plastered surfaces of walls by brooming down or by steel wire brushing , scrapping down and applying three coats of white wash complete all as specified and as directed.
M & L preparation of new plastered walls, pillasters, cornices surface , etc. and applying two coats of cement base paint over a coat of self primer including curing after each coat complete all as specified and as directed.
PURVIK CONSTRUCTIONS
M/S ADITYA CONSTRUCTIONS
RAJENDRA KRISHNA SARAF
M/s B C CHOUGULE
M/S MAHADEV M PATIL
M/s. N D KALING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .