Providing Additional CCTV cameras, including Ethernet switches and associated works for video surveillance system at Anushaktinagar, Mumbai-400094

IP bullet IR outdoor camera 2MP, 50 mtr IR

Dome Indoor Camera

Panaromic outdoor Camera

PTZ IP day/night camera with POE Injector (25W)

Switch industrial Grade(Layer 2): Supply, installation, testing & commissioning of Layer 2 managed industrial switch 8 X 10/100/1000 Tx, POE/POE++ with Minimum 2 nos.or higher gigabit copper & SFP combo ports conforming to following features: 5.6 Gbps Switching capacity, Supports 10/100/1000 Mbps SFPs, Up to 8K MAC address table, Redundant power inputs, IP-30 Metal Case, Support X-Ring function, SNMP v1/v2c/v3, Web, Telnet, CLI Management TFTP firmware update, system configure restore and backup. Provides standards-based IEEE 802.3af. Power over Ethernet - 8 ports of class 3 powered devices at 15.4 watts. Alternative A mode. Ingress Packet Filter and Egress Packet Limit, all as per instruction of Engineer in charge. Scope includes supply of 2 nos. SMPS, SFP modules 2 nos, and all copper port fully loaded & all as per technical specification, scope of work. Note: 1. Better switch configuration is acceptable. 2. Switch to be Din rail mountable. 3.Dual SMPS should be compatible with switches and shall be pre-approved before procurement. 4. Configuration of Switches and intigration with Existing Backbone Ofc netwrok In the scope of agency

Layer 2 Switch : 4 port manageable fully Loaded LX modules, Layer 2 Ethernet switches with minimum 20, 10/100/1000 base T ports with PoE and minimum 4 nos. Gigabit uplink LX ports. The switching engine shall have a switching speed of at least 48 Gbps. each.. Note: 1. Details all as per technical specification, scope of work. 2. Better switch configuration is acceptable. 3. Configuration of Switches and intigration with Existing Backbone Ofc netwrok In the scope of agency

Layer 3 Switch :28 port manageable fully loaded with LX modules, layer 3 Ethernet Switch with 24 ports 10/100/1000 base LX and 4 numbers of 10000 base LX ports to support single mode fibre, with redundant power supply in hot standby mode. The switching engine (Backplane) should have a switching speed of at least 128 Gbps. Note: 1.Details all as per technical specification, scope of work. 2. Better switch configuration is acceptable. 3. Configuration of Switches and intigration with Existing Backbone Ofc netwrok In the scope of agency

Outdoor Junction Box: Supply, installation, testing & commissioning of out door junction Box (wall/pole mounted) all as per specification and scope of work & as per instruction of engineer in charge. Note:1. Every junction shall have a suitable chamber to facilitate future cable pulling. 2. The scope of the agency includes cable dressing, installation of nut bolts and cable ties, earthing connections of the junction box (JB) using 8 SWG GI wire, and construction of a brick chamber of suitable size—preferably 400 mm (L) × 400 mm (W) × 300 mm (D)—with pipe entry arrangements. The chamber shall be filled with sand after placing the cable loop inside. 3. Details regarding installation, cable entry chambers, and earthing are provided in the scope of work 4.The outdoor junction box should be suitable for installing a Layer 2 switch,2 Nos. SMPS a 600VA UPS, a 6A MCB& spare connectors, a fibre splice box/LIU, an inspection light (6-watt LED) with a control switch, and a spike guard inside the junction box. The junction boxes shall be pole-mounted