REPAIRS/ MAINTENANCE OF INTERNAL ELECTRIFICATION AND OTHER CONNECTED WORKS AT GANESHKHIND AREA UNDER GE(I) RnD PASHAN

Amount

Taking down carefully Copper/aluminium point wiring (light, Fan, socket or power point) alongwith PVC conduit / casing caping including switches, sockets, regulator, bell, bell push any size and keep the same for schedule of credit & making good disturbed surfaces of walls/floors etc. complete all as specified and directed.

Taking down existing unserviceable MCCBs/ MCB DBs with MCCBs, MCBs complete including making surface good as per direction of Engr-in-Charge

Material and labour for point wiring using approved colour coding as per IS with and including stranded copper conductor single core 1.5Sqmm (Nominal area), PVC insulated FRLS cable drawn in and including PVC conduit of dia not less than 19mm, concealed ISI marked medium grade with and including all connecting accessories as required at site complete, including PVC insulated copper conductor 1.5 Sqmm (Nominal area) single core PVC FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for :- (Notes : Rate for cutting chases is deemed is include in quoted rated by the contractor and switches and sockets shall be measured and paid for separately) (a) One light point controlled by one switch one way.

(b) One Fan/Exhaust point controlled by one switch one way complete all as specified and directed by Engr-in-Charge.

(c) One 3 pin 5 Amp socket out let controlled by one switch on independent board complete all as specified and directed by Engr-in-Charge.

(d) One 3 pin 5 Amp socket out let controlled by one switch but on same board complete all as specified and directed by Engr-in-Charge.

(e) One bell/buzzer point controlled by one push button complete all as specified and directed by Engr-in-Charge.

All as per item 3 here-in-before but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade FRLS single core stranded ( multistranded ) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one run of PVC insulated green in colour 2.5 sq mm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and as directed.

Material and labour for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade drawn in and including PVC casing capping of suitable size including necessary Tees, junctions, bends etc fixing to wall/roof including hylam sheet of 3 mm thick fixed on existing M.S. sunken board of suitable size for housing switch sockets etc including 1.5 sqmm. green FRLS PVC insulated wire for earth continuity complete all as specified and as directed for the followings:- (switches and sockets shall be measured and paid for separately) (a) One light point controlled by one switch one way.

(b) One Fan/Exhaust point controlled by one switch one way complete all as specified and directed by Engr-in-Charge.

(c) One 3 pin 5 Amp socket out let controlled by one switch on independent board complete all as specified and directed by Engr-in-Charge.

(d) One 3 pin 5 Amp socket out let controlled by one switch but on same board complete all as specified and directed by Engr-in-Charge.

(e) One bell/buzzer point controlled by one push button complete all as specified and directed by Engr-in-Charge.

(f) One light point controled by two way switch complete all as specified and directed by Engr-in-Charge.

All as per sl item 9 above but with 2.5 sq mm size PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly Complete all as specified and directed.

Supply and fix switch piano, flush type, 5 Amp, single pole, two way complete all as specified and directed.

Supply and fix switch piano, flush type, 6 Amp, single pole, one way complete all as specified and directed.

Supply and fix socket 6 Amp surface type complete all as specified and directed.

Supply and fix switch socket combination 6 Amp surface type complete all as specified and directed.

Supply and fix switch piano flush type, single pole 1 way 16 Amp Complete all as specified and directed.

Supply and fix socket outlet 2 in one 6 pin, 6 and 16 Amp Complete all as specified and directed.

Supply and Fix bell push, 6 Amps, SP, flush type complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate complete all as specified and directed.

Supply and Fix Electric Bell , AC 230 volts, single pole complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing / new phenolic sheet etc. as required complete all as specified and directed.

Supply and Fix ceiling rose, surface bakelite, 65mm x 50mm three terminals 230 Volts, AC Single phase complete all as specified and directed.

Supply & fixing sheet metal enclosure distribution board SPN 4 way double door type including making good to the disturbed surface all as specified and as directed Note : All incoming/out going MCBs shall be measured and paid under appropriate item here in after.

Supply & fixing sheet metal enclosure distribution board SPN 8 way double door type including making good to the disturbed surface all as specified and as directed Note : All incoming/out going MCBs shall be measured and paid under appropriate item here in after.

Supply & fixing sheet metal enclosure distribution board SPN 12 way double door type including making good to the disturbed surface all as specified and as directed Note : All incoming/out going MCBs shall be measured and paid under appropriate item here in after.

Supply and fixing Vertical TPN distribution board factory made double door flush type as per IS 8623 made from sheet metal duly powder coated for single phase outgoing and three phase incomer, with 200 Amps rated bus bar, 415 V, 4 way flush with all accessories complete all as specified and directed by Engineer-in-Charge. Note : All incoming/out going MCCB/MCBs shall be measured and paid under appropriate item here in after.

Material and labour for MCCB 4 pole, 415 volts, 63 amps with breaking capacity 25KA, adjustable type including electrical connection as per site requirment complete all as specified and as directed.

Supply and fixing MCB single pole 6-32 Amps capacity 10 KA, 240 Volts AC 50 Hz, B Curve complete all as specified and directed.

Supply and fix MCB single pole and neutral 20 to 40 Amps capacity 10 KA, 240 Volts AC 50 Hz, C Curve complete all as specified and directed.

Supply and fix MCB Triple pole and neutral 63 Amps capacity 10 KA, 240 Volts AC 50 Hz, C Curve complete all as specified and directed.

Taking down sub main wiring of any size carefully complete and making good disturbed surface of walls /ceilings etc. and catered for schedule of credit complete all as specified and directed.

Material and labour for sub main wiring using two single core 6 sqmm copper conductor,FRLS cable including PVC casing caping of suitable size,including one run of PVC insulated copper earth continuity wire of 6.0 sqmm and connected to earth dolly complete all as specified and as directed. Note: 2 run of 6 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 6 Sqmm earth wire and one run of PVC casing caping will be measured as one unit.

Material and labour for Sub main wiring using two single core 2.5 sqmm copper conductor, FRLS cable including PVC casing caping of suitable size, including one run of PVC insulated copper continuity wire of 2.5 spmm and connected to earth dolly complete all as specified and directed. Note: 2 run of 2.5 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 2.5 earth wire and one run of PVC casing caping will be measured as one unit.

Material and labour for sub main wiring using two single core 4 sqmm copper conductor,FRLS cable including PVC casing caping of suitable size,including one run of PVC insulated copper earth continuity wire of 4 sqmm and connected to earth dolly complete all as specified and as directed. Note: 2 run of 4 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 4 Sqmm earth wire and one run of PVC casing caping will be measured as one unit.

Material and labour for sub main wiring using two single core 10 sqmm copper conductor, FRLS cable including PVC casing caping of suitable size, including one run of PVC insulated copper earth continuity wire of 10sqmm and connected to earth dolly as required 4 X 10 sq. mm+ 1 X 10 sq. mm earth wire complete all as specified and directed. Note: 4 run of 10 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 10 Sqmm earth wire and one run of PVC casing caping will be measured as one unit.

Taking down carefully existing ceiling fan/ Exhaust fan any size from site and keeping in safe custody for reuse at site as per direction of Engr-in-Charge complete all as specified and directed.

Material and labour for Cleaning dust, removing of cavaties and painting of Ceiling fan any size taking down under item No 40 with by including applying one coat of synthetic enamel paint by spraying as per direction of Engr-in-Charge complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Supply and Fix fan capacitor 2.5/4 mfd complete all as specified and directed.

Taking down the existing unserviceable ceiling fan of any sweep deposited to MES store and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE complete all as specified and directed.

Re-winding of ceiling fan any sweep taking down vide item No 40 with same gauge super enameled copper wire to maintain speed at load complete all as specified and directed.

Taking down the defective exhaust fan of sweep 250mm to 300mm of any type and make after disconnecting electrically & mechanically and transporting to the workshop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following :- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of varnish over the winding to improve the insulation value complete all as specified and directed.

Re-winding of Exhaust fan any sweep taken down vide item No 46 with same gauge super enameled copper wire to maintain speed at load complete all as specified and directed.

Taking down the existing unserviceable exhaust fan of any sweep deposited to MES store and Supply and fix exhaust fan steel body AC single phase 230v of size 300 mm sweep with blades, and frame and louvers complete all as specified and directed.

Taking down the existing unserviceable exhaust fan of any sweep deposited to MES store and Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Taking down carefully by unscreqing from boards/outlet boxes, fittings and fixtures such as ceiling fitting, bulk head fittings and tube light fittings building security/street light/flood light/garden light Panel fittings any type etc and making good the distrubed surfaces complete all as specified and directed by Engr-in-charge

Supply and fix surface and wall mounted LED batten, aluminium housing provided for efficient heat dissipation and integrated electronic driver, 20 Watt 230V complete with all accessories internally prewired and provision of flexible three core copper conductor 23/0.0076 upto 1.5metre from celing rose to fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix surface and wall mounted LED batten, aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver, 20 Watt 230V complete with all accessories internally prewired and provision of flexible three core copper conductor 23/0.0076 upto 1.5metre from celing rose to fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix decorative wall mounting light fixture nickel finish unbreakable, suitable for 09W LED lamp complete with pre-wired and including 09W LED lamp energy efficient ready to use pack,complete all as specified and directed.

Supply and fix energy saving new generation 10W LED IP-65 bulkhead luminaire with opal diffuser, with lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50Hz,complete all as specified and directed.

Material and labour for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised strip 32mm x 6 mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 chamber cover slab, GI funnel, with GI watering pipe 20 mm bore med gde, wire mesh, protection pipe 40 mm bore GI pipe light gde for earth lead upto 7.50 m long including testing complete all as specified and directed by Engineer-in-Charge. Note : (i) GI strip beyond 7.5 mtr will be measured and paid sepeartely. (ii) Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG / user. Test results are to be written in letters of 20mm height in white colour on black paint back ground. (iii) The earth resistance should be less than 2 Ohm. (iv) If the test result of earth resistance not obtained below 2 Ohms the contractor shall improve the earth resistance with own arrangement no extra payment will be paid by the department.

Supply and fixing 15 watt round surface light fitting elegantly designed sleek surface mounted pressure die cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver base complete all as specified and directed.

Supply and fix LED 15Watt post top lantern (gate light) energy saving, environment friendly designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including suitable size pipe up to 0.5 meter height where as required complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for taking out/laying of HT/ LT under ground cable and getting out in the following type of earth strata complete all as specified and as directed:- (a) Soft soil.

(b) Hard soil

(c) Disintegrated rock

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soils complete all as specified and directed.

Removing surplus excavated soil to a distance not exceeding 50metre depositing where directed at a level not exceeding 1.5metre above the starting point complete all as specified and directed.

Material and labour for riddled earth filling in trenches to required width at bottom and top of cable cushioning including spreading leveling and consolidation complete all as specified and directed. Note : Punned thickness shall only be measured and paid.

Supply and lay in trenches un-reinforced precast concrete class LV, Type I, flat, size 250mm x150mm x 40mm LT for cable protection complete all as specified and directed by the Engr-in-Charge.

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 Core complete all as specified and directed

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 Core complete all as specified and directed

Supply and fixing LED flood light 180 Watt energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with highway efficient LED as light source, suitable for highlighting architectural features complete all as specified and directed.

Supply and fixing LED flood light 200 Watt energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with highway efficient LED as light source, suitable for highlighting architectural features complete all as specified and directed.

ANUSHKA BUILDERS (BID ID -3391665)

ADITYA LAXMAN PASALKAR (BID ID -3392682)

M/S - KRUPA ELECTRICALS (BID ID -3390344)

MAYUR ELECTRIC SERVICES (BID ID -3390854)

YOGESH ELECTRICALS (BID ID -3386778)

GANGA ENTERPRISES (BID ID -3392050)