COMPREHENSIVE MAINT OF FLOOR ROOF CEILING COLUMNS JOINERY CHAJJA FINS FACIAS LEAKAGE SEEPAGE PLASTERING DOOR WINDOW VENTILATORS GRILLS GUARDS BARS PLUMBING STRUCTURAL REPAIR SMART PERIODICAL SERVICES SEWAGE LINE SEPTIC TANK

Amount

Dismantling of old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles 300x200x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and reqired to give high gloss finish including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour machine cut kota stone slab for skerting 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and reqired to give high gloss finish including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 20mm thick plaster in CM (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid compound for concrete and mortar complete all as specified and as directed.

Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for applying wall care putty 1.5mm thick and applying two coats of oil bound distemper over a coat of alkali resistant primer on new plaster surface of wall etc complete all as specified and as directed.

Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatment and applying two coats of oil bound distemper over a coat alkali resistant primer and finished the existing surface with 1.5mm thick wall care putty etc complete all as specified and as directed.

All as per item no 14 above but on ceiling complete all as specified and as directed.

Material and labour for preparation of newly plastred surfaces of wall by vaccume based sanding machine, and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scaffoldings complete all as specified and as directed as per manufacturers instructions.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vaccume based sanding machine, removal of nails etc & filling cracks/hole with putty, and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scffoldings complete all as specified and as directed as per manufacturers instructions.

Material and labour for applying one coat of synthetic enamel paint to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint on steel surface of any description over 10cm widht or girth including preparation of old painted surfaces complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe complete all as specified and as directed.

All as per item No. 21 above but 20mm dia complete all as specified and as directed.

Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm sq fixed to walls , ceiling or in floors etc complete all as specified and directed.

All as per item No. 23 above but 20mm dia complete all as specified and as directed.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repairs Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix in repair chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair glass shelf 600mm long, fixed in position complete all as specified and as directed.

Supply and fix in repair toilet paper holder with flap recessed type (stainless steel) complete all as specified and as directed.

Supply and fix in repair 15mm bore Bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.

Supply and fix in repair vitreous China wash down water closet pan semi pedestal pattern(Anglo Indian type) , white including 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and as directed

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix in repair vitreous China wash basin white flat back, size 550 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore CP pillar tap, chain, plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repair Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and as directed.

Dismantling cast iron drain pipes of any dia jointed in cement mortar obtained either from trenches/wall as required complete all as specified and directed. (Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured)/ Tee complete all as specified and directed

Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

Supply and fix 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and directed.

Supply and fix 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

Supply and fix in repairs PVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fix PVC (SWR) bend/ shoe/ Tee 110mm dia complete all as specified and directed.

Supply and fix in repair 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and directed.

Supply and fix 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face with particle board core supply and fixing in frame at site as per spefication and drawing complete all as specified and directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness below or above ground level complete all as specified and as directed.

Material and labour for providing 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed

Material and labour for 300x300 x25 mm thick PCC designer Pre-polished tiles (Factory make and approved size) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars,window -cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

Demolition of cement concrete of any description including any treatment there to and in any position provided as in roof padding, roof kerb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed by the Engineer-in-Charge.

Material and labour for providing plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : Pibial Primer of TEXSA or equivalent product of BITUMAT/ BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced (4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 4 Kg mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT. (Note :- Cost of cutting groove to parapet wall for inserting APP membrance and filling groove with cement mortar (1:3) is deemed to be included within the quoted rate.)

Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside to store in safe custody or for taking credit including making good of the disturbed surfaces complete all as specified and directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLS (Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed. Note: Chases cutting and making good to disturbed surfaces shall be measured and paid separately)

All as per item No 76 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 76 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No 76 here in above but for One call bell point controlled by one bell push switch complete all as specified as directed.

All as per item No 76 here in above but for one light point controlled by two 2 way modular switch complete all as specified as directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed. Note: Chases cutting and making good to disturbed surfaces shall be measured and paid separately)

Supply and fix modular switch 1 way, 6 A, 1 module including modular white cover plate with frame complete all as specified and directed.

Supply and fix modular switch 1 way, 16A, 1 module including modular white cover plate with frame complete all as specified and directed.

Supply and fix socket 6A 2/3 pin combined 2 module including modular white cover plate with frame complete all as specified and directed.

Supply and fix socket 15A/16A, 2/3 pin combined 2 including modular white cover plate with frame module complete all as specified and directed.

Supply and fix modular switch 2 way, 6 A, 1 module complete all as specified and directed.

Supply & Fix Bell push switch designer modular type 1 module complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and directed.

Supply and fix in repairs call bell, AC, 230 volt, single pole complete all as specified and directed.

Supply and fix modular type electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed.

Material and labour for sub-main wiring (Concealed type) with FRLS four run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 10.0 Sq mm and one run of 10.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit all as specified and as directed. (Note :(i) Five run of 10.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM) -(ii): Chases cutting shall be measured and paid separately )

Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit all as specified and as directed. (Note :(i) Three run of 6.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM) (ii): Chases cutting shall be measured and paid separately

Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit all as specified and as directed. (Note(i):Three run of 4.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM) (ii): Chases cutting shall be measured and paid separately

Chases cutting in brick / stone / concrete surfaces gitrh, exc 10 cms and not exc 20 cms for concealed wiring and the like, making the surface good to match the existing in CM 1:3, etc complete all as specified and directed.

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 4 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure one complete all as specified as directed.

All as per item No 96 above but for 8 way SPN DB complete all as specified and directed.

All as per item No 96 here in above but for 12 way SPN DB complete all as specified and directed.

Supply and fix 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.

S&F MCCB four pole 63 amps, 415 volts, 16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed.

Supply and fix in repair MCB TP 63 amps, 415 volts, 10 KA, 'C' Series with all incoming / outgoing connections complete with complete all as specified & as directed.

S&F in repair MCCB, 4 pole, 63 Amp capacity, 16 KA rupturing capacity, AC 415 volts with thermal and magnetic settings complete all as specified and directed.

S&F in repair MCCB, 4 pole, 100 Amp capacity, 16 KA rupturing capacity, AC 415 volts with thermal and magnetic settings complete all as specified and directed.

S&F in repair MCCB, 4 pole, 200 Amp capacity, 36 KA rupturing/ breaking capacity, AC 415 volts with thermal and magnetic settings complete all as specified and directed.

S&F MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fix, in repair, MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.

Supply and fix in repair, MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supplying & fixing LED tube light fitting, 1 x 18 watt, 4 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserceable light fitting all as specified and directed.

Supplying & fixing LED tube light fitting, 1 x 10 watt, 2 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserceable light fitting all as specified and directed.

Supplying & fixing LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down the old unserviceable fitting complete all as specified and as directed.

Supply and fix in repair 2 ft x 2 ft recess/surface mounted luminaire suitable for grid ceilling /suspended from ceiling complete with electronic driver for 35 / 36 W LED luminarries and including 35 / 36 W LED Lamp duly pre wired complete with all acessories inculding connection with flexible twin core copper conductor of size 23/0.0076 mm complete including taking down old unserviceable fitting all as specified and as directed.

Supply and fixing LED building security light fitting 25 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete including taking down old unserceable light fitting all as specified and directed. (Make: Century LED Cat No. SPSP025C / Crompton Cat No. LSTS-25-CDL-M / Jaguar Cat No. LCPRSRT25WXC/ equivalent model of Makes specified in PS here-in-after)

Materials & labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4.0 mm dia of by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe(light grade), alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and as directed.

Materials & labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth strip protected by and including 40mm dia GI pipe(light grade), alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth strip connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.

Supply and fix in repair hylem sheet, of reputed make as approved by GE, 10"x8" required at site including cutting of switches socket , regulator etc and fix on position complete all as specified and as directed. Note:- Switches socket, regulator etc shall be measured and paid separately.

Supply and fix in repair hylem sheet,of reputed make as approved by GE, not less than 8"x6" required at site including cutting of switches socket , regulator etc and fix on position complete all as specified and as directed. Note:- Switches socket, regulator etc shall be measured and paid separately.

Supply and fix in repair hylem sheet, of reputed make as approved by GE, not less than 6"x4" required at site including cutting of switches socket , regulator etc and fix on position complete all as specified and as directed. Note:- Switches socket, regulator etc shall be measured and paid seperately.

Supply and fixing in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply and fix in repair LED lamp (B22 Base type) of 1x7 W complete all as specified and as directed.

Material and labour for taking down Window Type Air Conditioner of 1.5 TR / 2.0 TR,cleaning by water , thoroughly, cleaning by caustic and re-washing with plain water, Servicing. greasing, vacuuming, taking out defective parts / spares, replacing of spares required, and connecting all electrical and gas pipe connection, and refixing at same location with proper arrest of leakage and commissioning , etc complete, all as directed by the Engr-in-Charge. Existing Makes:- LG / Videocon / Voltas / Samsung / Blue Star. Notes:- (i) The spares listed herein after shall be measured and paid as supply only. The spares supplied shall be of existing make, or shall suit the existing make of spare, duly approved by the GE. (ii) The labour element involved in replacing the spares is deemed to include in the quoted rate. (iii) Filling of gas shall be measured and paid seperately, under supply only. (iv) Cost of any other spares / minor spares, not specified here in after, and the spares like nut bolts washers etc shall be deemed to be included in the unit rate quoted. (v) Rewinding shall be measured and paid separately under relevant items. (vi) The decission of GE shall be final and binding. (vii) The contractor shall take cognizance of the above aspects and quote the unit rate.

All as per item No. 121 above but for split type AC of 1.5 / 2.00 ton capacity complete all as specified and directed.

All as per item No. 121 above but for Water cooler upto 60 / 120 litre capacity complete all as specified and directed.

Supply only hermitically sealed rotary compressor unit including leak testing vacumising pressure tesing complete suitable for window type AC of capacity 1.5 TR complete with refrigerator complete all as specified and directed. Make of compressor:-Tecom / Sriram / Kirloskar / LG / Voltas). Make of Existing AC:- LG / Videocon / Voltas / Samsung / Blue Star.

All as per item No. 124 above but for window type AC 2.0 TR complete all as specified and directed.

All as per item No. 124 above but for split type AC 1.5 TR complete all as specified and directed.

All as per item No. 124 above but for split type AC 2.0 TR complete all as specified and directed.

Supply only compressor unit hermitically sealed compresso unit for storage type water cooler of capacity 60/120 ltrs per hr compatible with existing company make Model-412Y/419 complete all as specified and directed.

Rewinding of blower motor with super enameled copper conductor for 1.5 TR Window / Split type AC (Gauge and size of conductor as per existing one) including heat vernishing and replacing the all insulating materials and bush / bearing complete all as specified and directed. Make of winding wire:- KEI / Finolex / RR Kabel / HPL / ICC / Devidayal / Polycab.

Rewinding of condensing fan motor with super enameled copper conductor for 1.5 TR Window / Split type AC (Gauge and size of conductor as per existing one) including heat vernishing and replacing the all insulating materials and bush / bearing complete all as specified and directed. Make of winding wire:- KEI / Finolex / RR Kabel / HPL / ICC / Devidayal / Polycab.

Rewinding of blower motor with super enameled copper conductor for 2.0 TR Window / Split type AC (Gauge and size of conductor as per existing one) including heat vernishing and replacing the all insulating materials and bush / bearing complete all as per specified and directed. Make of winding wire:- KEI / Finolex / RR Kabel / HPL / ICC / Devidayal / Polycab.

Rewinding of condensing fan motor with super enameled copper conductor for 2.0 TR Window / Split type AC (Gauge and size of conductor as per existing one) including heat vernishing and replacing the all insulating materials and bush / bearing complete all as per specified and directed. Make of winding wire:- KEI / Finolex / RR Kabel / HPL / ICC / Devidayal / Polycab.

Repairs to base / structure / bottom legs of water cooler of capacity 60/120 lts, by providing new legs with MS sheet as per existing shape and gauge including necessary welding with replacement of wornout nuts and bolts as per existing parts including fabrication works complete all as specified and directed.

Material and labour for spray painting to water cooler of capacity 60/120 Ltrs, externally with one coat of synthetic enamel paint of existing shade approved make, after preparing the good the old surface complete all as specified & directed.

Supply and filling of Gas charging with R-22 refrigerant by detecting and rectifying leaks on condensor, evaporator and pipe lines by brazing /welding with the same by making it. confirm with N2 pressure testing and flushing the system with liquid nytrozen, dehydration and evacuation the system including replacement of drier and capilliary tube all as directed and specified for window type AC/split type AC of capacity 1.5 / 2.0 TR complete all as specified and directed.

All as per item No. 135 above but for 60/120 Ltrs capacity water coolers with R-134 refrigerant complete all as specified and directed.

Supply only starting capacitor for Window / Split type AC 1.5 TR/ 2.0 TR capacity 50-120 mfd 440 volts, etc complete all as specified and directed. Make : Universal / Usha / Sarada / Asian.

Supply only running capacitor 50-120 mfd 440 volts for window / Split type AC 1.5 TR/ 2.0 TR capacity, etc complete all as specified & directed. Make : Universal / Usha / Sarada /Asian.

Supply only starting capacitor for water cooler 60/120 Ltrs capacity 60-80 mfd, 440 VA complete all as specified and directed.

Supply only running capacitor of capacity 36 mfd 440VA, 50Hz.etc, for water coolers complete all as specified and directed. Make:- Universal / Usha / Sarada /Asian.

Supply only starting capacitor 440VA, 50Hz. 10mfd complete all as specified and directed. Make:- Universal / Usha / Sarada /Asian.

Supply only running capacitor 25 mfd, 440 VA, 50Hz. capacity complete all as specified and directed. Make:- Universal / Usha / Sarada /Asian.

Supply and fix in repair electronic PCB / sensor board for window type AC 1.5 TR/ 2.0 TR capacity as per existing Make / Model of AC LG/Samsung/Videocon complete all as specified and directed.

Supply and fix in repair electronic PCB / sensor board for split type AC Indoor unit, 1.5 TR/ 2.0 TR capacity Make Samsung/ LG/ Voltas complete all as specified and directed.

Supply only condenser fan blades for water cooler complete all as specified and directed.

Supply only condenser fan blades for window type AC/ Split type AC of any make and capacity complete all as specified and directed.

Supply only washable Air filters for Window Type AC of any type and make complete all as specified and directed.

Supply and fix in repair of PVC connection pipe reinforced type with sealing 'O' ring and brass complete all as specified and directed.

Supply only Thermostat for water cooler 60/120 ltr capacity complete all as specified and directed.

Supply only Thermostat for window /split type air conditioner complete all as specified and directed.

Supply only washable Air filters for split type of any make and capacity complete all as specified and directed.

S&F in repair Copper Condensor, Window AC 1.5 TR connected to Aluminium Fins, complete all as specified and directed.

All as per item No.153 above, but for window AC of capacity 2.00TR complete all as specified and directed.

All as per item No. 153 above, but for Split type AC of capacity 1.50TR complete all as specified and directed.

All as per item No. 153 above, but for Split type AC of capacity 2.00TR complete all as specified and directed.

Supply and fixing Brass CP, push tap / Lift taps for water cooler of 15 mm bore / dia complete all as specified & directed.

Supply only PVC connection pipe 60 cm long, reinforced type with sealing 'O' ring and brass nut with both end complete all as specified & directed. Make:- Prayag / Supreme / Prince / Polytuf.

S&F in repair modular type power unit 25 amps compleate with 4 module plate, starter plug and socket, etc complete all as specified and directed. (Make-Crabtree (sapphire) of Havells or equivalent in Anchor / Bajaj / HPL / C&S.

Material and labour for PVC flexible waste pipe 15 mm inner dia, 5' long for water cooler of any make after taking down the old one complete all as specified & directed. Make:- Prayag / Supreme / Prince / Polytuf.

Material and labour for 3 pin Plug top, 15 Amps after taking down the old one complete all as specified & directed. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL / C&S / Standard

Material and labour PVC insulated and overall PVC sheathed 4 sq. mm multi stranded, 3 core round type flexible copper cable, suitable for window type ACs/ Split type AC 1100 volts, after taking down the old unserviceable one complete all as specified and directed.

Supply and fixing, in repair, float valve 15 mm dia with rod and ball for water cooler complete all as specified & directed. Make:-Prayag / Polytuf Zoloto / Leader / Kirloskar / veenus / Upadhayay

Supply and fix in repair, drain out flexible hose pipe 15mm bore with proper clamping etc. complete all as specified and directed.

Taking down carefully Ceiling Fans of any make, model and capacity from their existing places for servicing i. e. lubricating / Greasing and for rewinding / painting by dismantling the same and keep the blades, canopy, splitpin and other parts and components in safe custody and hanging / fitting on it's previous position after repair /rewinding / painting / replacement of spares etc complete all as directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE. (iv) Rewinding and painting shall be measured and paid separately.

All as per item No.165 above but Exhaust fan, any make, model and size(230/300/450 mm sweep) complete all as specified and directed.

Supply only GM Bush for ceiling fan 1200/1400 mm sweep complete all as specified and directed.

Supply only GM Bush for Exhaust Fan 230/300/350/450 mm sweep complete all as specified and directed.

Supply only Ball bearing (cat No. 6201) for ceiling Fan/Exhaust Fan complete all as specified and directed. Make:- SKF / NBC / Any other reputed make as approved by the GE

All as per item No. 169 here-in-before but cat No. 6202 complete all as specified and directed.

All as per item No. 169 here-in-before but cat No. 6203 complete all as specified and directed.

Supply and fix in replacement capacitor 2.5 mfd, 220 volts complete all as specified and directed. Make:-Tipcon /Universal / Usha / Bajaj / CG Any other reputed make as approved by the GE

All as per item No. 172 here-in-before but 3.0/ 4.0 mfd complete all as specified and directed. (Make:Tipcon/Universal)

Material and labour for painting by spraying with synthetic enamel paint, first quality,glossy finish, to Ceiling Fans,any make, Model and size,including Blades/Down rods/ Canopy/Stand, Casing/ Cage and all accessories after preparation of surfce including thoroughly rubbing /cleaning old rusted spot complete all as specified and directed.

All as per item No. 174 above but for Exhaust Fans, any make, model and size(230/300/450 mm sweep) complete all as specified and directed.

Material and labour for Rewinding of ceiling fans armature of 1200 mm/1400 mm sweep of any make & Model with replacing the burntout winding by new super enameled high grade copper wire of existing gauge and number of turns and all insulating materials including heat varnishing and testing complete all as specified and directed. Make of wire -Finolex / KEI / Havells / ICC / Devidayal / KEI / HPL / C&S / RR Kabel.

All as per item No. 176 here-in-before but for exhaust fan 230mm/ 300mm sweep, single phase, 230 volts complete all as specified and directed.

All as per item No. 176 here-in-before but for exhaust fan 450 mm sweep, three phase, 230 volts complete all as specified and directed.

Material and labour in replacement of incoming twin core copper flexible wire of size 14/0.0076 from ceiling rose to ceiling fan / exhaust fans complete all as specified and directed. Make : FINOLEX / HAVELLS / POLYCAB/ KEI / HPL / RR kabel / Mescab.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 220 CFM with BEE 5 star rating along with electronic regulator & operated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V,50 Hz, of size 300mm sweep with, blades, frame and louvers complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V,50 Hz, of size 450mm sweep heavy duty with, blades, frame and louvers complete all as specified and directed.

Taking down Geysers of any make/ model / type / capacity after disconnecting all electrical and water supply line for repair/ replacement of parts and components, refixing in old position after repair/replacement complete all as specified and as directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE.

Supply only Apparatus assembly plate ( 8/9 hole) for Geyser of 25 Ltrs / 50 Ltrs capacity (as per existing sample) complete all as specified and directed.

Supply only Thermostat straight stem type complete all as specified and directed. Make : Bajaj/ Elcon/Girish/EGO.

Supply only Heating Element 1500 watt suitable for Geyser of 25 Ltrs capacity Triangular/ Round type complete all as specified and directed. Make : Bajaj / Rex/as per existing make

Supply only Indicating (Red/Green) lamp LED type (square/Round) button type for Geyser of 25/50 Ltrs capacity complete all as specified and directed.

Supply only PVC flexible cold water inlet pipe 15 mm dia 600 mm long complete all as specified and directed. Make:- Prince / supreme / Prayag /Polytuf /. M/S Sak Plast Pvt Ltd.

All as per item No. 189 here-in-before but Hot water pipe ( Inlet wiremess type) complete all as specified and directed.

Supply and fix in repair chromium plated stop cock 15mm bore cast copper alloy complete all as specified and as directed. .

Supply and fix electric water heater,storage type steel body with copper inner tank and heating elment upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. (Make: Bajaj/ Venus/ Havells/ Usha/ Crompton Greaves)

EXTERNAL ELECTRIFICATION Excavation in trenches not exceeding 1.5 m width or n exc 10 sqm on plan and n.exe 1.5 m in depth for taking out/ laying of cable,foundation etc and getting out in soft/ loose soil complete all as specified and directed.

Returning and filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and directed.

Supplying, Laying, connecting, testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable after taking down old unserviceable cable with stranded aluminium conductors 16.0 sqmm x 4 core,1100 Volt grade, laid in trenches ,complete all as specified and directed. Note :- (i) Pipe and bricks for cable protection, sand cushioning and earth work shall be measured and paid separately.

Supply and lay sub class 'B' bricks laid dry in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and directed.

Laying only serviceable bricks (obtained from item No. 195 here-in-before) in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and directed.

Supply and fix galvanised iron pipe 40 mm bore, light grade for protection of UG cable, laid in Road/ drain/ pole etc. complete all as specified and directed.

Cutting hard standing / road for laying of cable / protection pipe not exceeding 30cm wide and not exceeding 30cm deep and making good after laying pipe/ cable etc. with PCC (1:3:6) type C2 using 40mm graded stone aggregates and matching with existing road complete all as specified and as directed.

Supplying and erecting steel tubular swaged pole, 9 mtr hight confirming to IS-2317/1980 type 410-SP-31, complete with cast iron base plate , finial taper plug , bolts, nuts and screws etc including two coats of aluminium paint on exposed surface of poles and two coats of black bituminious paint on embeded portion, numbering of poles complete, including taking out damaged prestressed concrete pole with porcelain insulator and demolition of cement concrete complete all as specified and as directed. Note:- PCC shall be measured and paid separately.

Supply and fix, Hot pressed moulded SMC junction box of inside dimension 300 mm x 150 mm x 170 mm to be fixed to pole with provision of 2 number aluminium bus bar of size 25x5mm with mild steel work complete all as specified and as directed. (Model JB-M10100 of Hensel/3020 of sintex or equivalent in sintex / make as approved by GE).

Supply and fix,, High Density Polyethylene pipe (HDPE), Class 2, 15 / 20 mm bore / dia fixed to electric pole with and including 20mm x 3mm GI clamps with every 1 mtr spacing complete all as specified and directed. (Note : Cost of fixing clamps shall deemed to be included in the quoted rate.)

Material and labour, for wiring with two run of PVC insulated, FRLS unsheathed, single core, multistranded copper conductors of size 1.5 Sq mm and one run of 1.5 sq mm size of copper conductor as continuity earth wire, drawn through HDPE pipe complete all as specified and as directed. Note : (i) Two run of 1.5 Sqmm + one run of 1.5 Sqmm cable for earth continuity wire shall be measured as an one unit i,e One Rm.

Supply and fix LED post top lantern with post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection including 35/40 Watt LED lamp with all accessories and fixing in existing post including taking out old unserviceable/ broken light fittings complete all as specified and as directed. (Make: Havells Cat No.RUBYPT35WLED757PSYMTOPC / Century LED Cat No. APBY040C / Crompton Cat No. LPTO-4-CDL/ Equivalent model of Makes specified in PS here-in-after)

Supply and fix LED Bollard light fitting with IP 65 protection including 9-12 Watt LED lamp alongwith B22 Cap or LED panel in built accessories and fixing in existing Bollard including taking out old unserviceable/ broken bollard light fittings complete all as specified and as directed. (Make: Century LED Magik Cat Part No: OGFB00001042/ Bajaj Cat No. BGBOM 605 9W LED WW/ Crompton Cat No. LBLTW-10-CDL/ Equivalent model of Makes specified in PS here-in-after)

Supply and fix, in repair, LED Street light luminaries with panel including LED Lamp of 60 Watt complete including GI bracket of Medium grade pipe, bent to shape,32 mm bore,1.2 mts long fixed with clamps 25x4 mm MS flat of suitable size, nut bolts and washers complete, including preparing new surfaces of iron and steel and applying with two coats of alluminium paint over one coat of red oxide primer complete all as specified and as directed. (Make: Century LED/ Crompton / Havells/ Equivalent model of Makes specified in PS here-in-after)

Maintenance and servicing of 12 KV VCB Panel, trolley and PT Servicing opening out HT cable termination joints, checking and cleaning all the spares of VCB to avoid any chances of flashing / burning due to loose connection, replacement of all bolts, nuts & washers (if found damaged due to flashing) with new one (anodised) of existing size, testing and calibration of earth fault and over load relays complete after re-connection of all dismantled cables and again testing after re-charging the VCB complete all as specified and as directed. Note : i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii). The spares replaced shall be measured and paid as supply only items herein below.

Supply only HT PT spout bushing for 12 KV VCB Panel complete all as specified and directed.

Supply only PT raising insulation materials complete all as specified and directed.

Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and as directed. Note:- Punned depth only shall be measured and paid.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) for coping of poles upto 30cm above ground including necessary form work, and finishing the surfaces fair and even including demolition of old damaged PCC coping complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-2 with 40mm graded stone aggregated for foundation of electric pole, bus bar and panel board etc including necessary form work and demolition of old unserviceable concrete complete all as specified and as directed.

Taking down and dismantling of all the component from engine assemble for carring out servicing / overhauling of DG sets by Complete dismantling of Disel Engine segregating serviceable and semi/unserviceable parts, decarbonisation, cleaning thoroughly all interior & exeterior parts after disconnecting the out-going connection of Diesel Engine from the Panel Board, repair /replacement of defective spares and servicing of all parts which ever is necessary & reassembling the DG set after completion of work complete all as specified and directed for the DG Set of capacity 200 KVA. NOTE: (a) Work shall be carried out through authorised service Engineer of the DG Set / OEM. (ii)Spare parts shall be measured and paid separately under relavant items as supply only The labour element involved for replaceing spares is deemed to include in the unit rate quoted. (iii) The unit rate quoted is deemed to include for minor spares not included here-in- after.

Dismentling the fuel injection pump(FIP) segragating serviceable and unserviceable parts, replace all unserviceable parts and cleaning serviceable parts, drying, lubricating, reassembling the FIP pump with cleaned serviceable parts along with new parts as per requirment, calibration and testing on completion complete all as directed by Engr-in- Charge for DG Sets of capacity 200 KVA complete all as specified and as directed. NOTE: Spare parts if any,shall be measured and paid separately under seperate items as supply only The labour element involved for replacing spares is deened to include in the unit rate quoted. .

Dismantling of self starter assembly for complete overhauling of self starter including replacement of carbon, armature coil, field coil, bush and bendix pinion and other related components of DG Set of capacities 200 KVA complete all as specified and directed. NOTE: Spare parts if any,shall be measured and paid separately under seperate items as supply only The labour element involved for replacing spares is deened to include in the unit rate quoted. .

Supply and top up the coolant K Cool super plus-25/75 complete all as specified and as directed. MAKE: CASTROL/SERVO.

Supply and top up the engine oil of suitable grade including drain out existing used oil complete all as specified and as directed. Make : Servo / Castrol.

Supply only Diesel filter element in DG set of 200 KVA capacity complete all as specified and directed.

Supply only Oil Filter element complete all as specified and directed.

Supply and fix Lead Acid Battery of capacity up to 120 to 150AH, 12V rechargeable of make Exide/Amron complete all as specified and directed.

Supply and fix Battery terminal cable for fixing battery complete all as specified and directed.

EXTERNAL WATER SUPPLY Supply and lay 25mm bore steel water tubing, galvanised 'medium grade’ GI pipe with all necessary fittings and fixed complete to walls and ceilings or laid in floors/ surface/ trench complete all as specified and as directed.

All as per above item No. 223 above but for 40mm bore complete all as specified and directed.

Supply and fix 25mm bore gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per above item No 225 above but for 40mm bore complete all as specified and directed.

Supply and fixing including connection and testing fully automatic star delta Panel type starter (comprising of Ammeter, Voltmeter, RYB indicating lamp etc.) AC 3 Phase 415 Volt 50 Hz enclosed in steel sheet enclosure suitable for 10 to 17.5 HP motor having range 32 to 63 Amps after taking down the old unserviceable one complete all as specified and directed. Make : Havells / L&T/ C&S

Supply and fixing including connection/ testing and commissioning fully automatic direct on line type motor starter AC 3 Phase 415 Volt 50 Hz enclosed in steel sheet enclosure suitable for and upto 5 HP motor having range 05 to 32 Amps after taking down the old unserviceable one complete all as specified and directed. Make : Havells / L&T/ C&S

Taking out non clogging centrifugal type pumping set of capacity 3HP to 5 HP with motor of any make from sewage sump form the foundation, decoupling the pump & motor after disconnecting of cable suction and delivery lines & transportation submersible pump & motor to workshop and back for necessary repair & replacement of unserviceable parts, including. bolts, nuts, washers, gaskets etc, duly cleaning and painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer & reassembling the same including testing, lowering & commissioning non clogging centrifugal type pumping set complete all as specified and directed. NB: (i) Replacement i.e. supply and fix in repairs shall be measured & paid separately under appropriate item. Unit rate against above item shall be quoted accordingly. (ii) Rewinding of motor, if so required, shall be measured & paid separately.

Material and labour for re-winding of motor capacity 3HP to 5 HP for centrifugal type pump set with same gauge as per existing and same number of turns of super enamelled solid copper conductor including providing core insulation, heat varnishing, testing complete all as specified and directed.

Supply and fix in repair “Shaft sleeve” for centrifugal type pumping set of capacity 3HP to 5 HP with motor complete all as specified and directed.

Supply and fix in repair “Shaft O-40” for centrifugal type pumping set of capacity 3HP to 5 HP with motor complete all as specified and directed.

Supply and fix in repair “Gland” for centrifugal type pumping set of capacity 3HP to 5 HP with motor complete all as specified and directed.

Supply and fix in repair“Bearing” for centrifugal type pumping set of capacity 3HP to 5 HP with motor complete all as specified and directed.

Supply and fix in repair “GM bush” for centrifugal type pumping set of capacity 3HP to 5 HP with motor complete all as specified and directed.

SEN ELECTRIC WORKS

MASTER BUILDERS

M/S SHEKHAR TRADING CORPORATION

NUPUR CONSTRUCTION

Shanti Construction Company

S Majumder and Construction

PUTUL CONSTRUCTION CO.

TOTCO