CONSTRUCTION OF YATRINIVAS NEAR SHRI SURYANARAYANA TEMPLE AT GIRIYAL CHANNAPUR, KITTUR, DISTRICT BELAGAVI.

CONSTRUCTION OF YATRINIVAS NEAR SHRI SURYANARAYANA TEMPLE AT GIRIYAL CHANNAPUR, KITTUR, DISTRICT BELAGAVI.

Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...

Earth work excavation by manual means for drains canals waste weir draft approach channels key trenches foundation of Buildings and bridges and such simillar works in all kinds of soils as per drawing...

Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top sur...

Providing and laying in Position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size and with approved sand including hand packing ramming watering including cost of all materials and labour with...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 6 12 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size upto p...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing centering shuttering formwork scaffolding etc for footing. 3percentage of Basic rate of concrete.

Providing and laying in Cement Concrete for all Basement and surface level works return walls retaining walls sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggr...

Providing centering shuttering formwork scaffolding etc for plinth beam. 50percentage of Basic rate of concrete.

Filling available excavated earth excluding rock in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by rammin...

Providing centering shuttering formwork scaffolding etc for RCC Columns / Shaft Slip Centering . 70percentage of Basic rate of concrete.

Providing centering shuttering formwork scaffolding etc for RCC Beams Lintels and Troughs of Aqueducts. 60percentage of Basic rate of concrete.

Providing centering shuttering formwork scaffolding etc for RCC Beams Lintels and Troughs of Aqueducts. 60percentage of Basic rate of concrete.

Providing centering shuttering formwork scaffolding etc for RCC Roof Slabs.50percentage of Basic rate of concrete.

Providing centering shuttering formwork scaffolding etc for Chejjas Canopy and Other Architectural projections of minor sections. 45percentage of Basic rate of concrete.

Providing centering shuttering formwork scaffolding etc for Chejjas Canopy and Other Architectural projections of minor sections. 45percentage of Basic rate of concrete.

Providing lath plaster with cement mortar 1 3 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja facia backing to cup bo...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 4 1 cement 4 coarse sand includ...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1 4 1 cement 4 coarse sand includ...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width along route of walls chipped for s...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping/welding joints tying with bin...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 3 1 cement 3 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 1 cement 4 fine sand including rounding off corners wherever required smooth rendering providing and removing s...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 1 cement 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1 3 1 cem...

Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves excluding cost of cement concrete and side clam...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size grani...

Providing and fixing in position Honnewood fully panelled shutters for windows with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick including cost of materials labour...

Providing Mathi/Nandi wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board type well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openin...

Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastome...

Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead fre...

Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08percentage and conforming to IS 15622 of approved make in all colours and shade...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS 15622 of approved make in colours such as White Ivory ...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concr...

Providing skirting dadooing rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed til...

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and f...

Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied 1.67L/10 m² over and including priming coat of exterior primer applied 2.20 kg/10 m² with paint of ap...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work over an under coat of suitable shade with ordinary paint of approv...

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 125mm

Providing and fixing fixtures for door a Hold fasts complete.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS 4992 with necessary screws etc. complete 125mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium tower bolts ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc. comp...

Providing and fixing SS Screws of sizes for structural glazing /ACP Cladding

Stainless steel butt hinges 125x64x1.9 mm IS 12817 marked

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

French spirit polishing Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil grease dirt and foreign matter sand ...

Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation...

Providing and fixing stainless steel Grade 304 railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature wherever required and fitting the sam...

Providing and fixing of Laterite cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1 3 1 cement 3 coarse sand and jointed with Adhesive over rough plaster surface excluding cost of...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clam...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe wit...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot and cold water supply including all CPVCplain and brass threaded fittings i/c fixing the pipe with clamp...

Providing and placing on terrace at all floor levels polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overfl...

Providing and fixing gun metal non return valve of approved quality screwed end 32 mm nominal bore Horizontal

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing gun metal non return valve of approved quality screwed end 32 mm nominal bore

Earth work excavation for pipelines/cables by Manual means upto 600 mmtrench width as per drawing and technical specifications including settingout shoring strutting barricading caution lights removal...

Poly Propylene Random Co polymer PPR pipe with fitting SDR 7.4 50 mm Outer dia

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid 10 litre low level white vitreous chinaflushing cistern and C.P. flush bend with fittings and C.I. ...

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid 10 litre low level white vitreous chinaflushing cistern and C.P. flush bend with fittings and C.I. ...

Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillartaps 32 mm C.P. brass waste of standard pattern including painting offittings and brackets cutting and making good the walls w...

Extra for providing opening of required size and shape for wash basin/kitchen sink in kitchen platform vanity counter and similar location inGranite including necessary holes for pillar taps etc. incl...

Providing edge moulding to 18mm thick Granite stone counters vanities etcincluding machine polishing to edge to give high gloss finish etc. completeas per design approved by Engineer in charge.

SS Single Lever Basin Mixer with high neck and 450mm long FC Economy

Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass bracketsand guard rail complete fixed with 40 mm long screws rawl plugs e...

Providing and fixing Towel rail Circular made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class

Providing and fixing Soap dish wired with 200mm width made of Stainlesssteel with all concealed fitting arrangements and all necessary accessories complete Class

Providing and fixing Flush valve soft touch made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Premium

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class

Providing and fixing Stainless Steel Grab Bar 600 mm Long with all concealed fitting arrangements and all necessary accesories complete Class

SS Bib cock with wall flange Premium

Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS 8931.

Providing and fixing C.P. brass angle valve for basin mixer and geyser Eachs of approved quality conforming to IS 8931

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 32 mm nominal bore

Providing and fixing ball valve brass of approved quality High or low pressure with plastic floats complete 25 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore

Providing and fixing Robe hook with 5 Eachs made of Stainless steel with all concealed fitting arrangements and all necessary accesories complet Class

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete including cost ofcutting and making good the walls and floors

* 100 mm inlet an...

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and installing at site of work P.V.C. pipes including cost of pipesand specials and labour including lowering into trenches laying trueto line level and perfect linking at joints leak proof ...

Providing and installing at site of work P.V.C. pipes including cost of pipesand specials and labour including lowering into trenches laying trueto line level and perfect linking at joints leak proof ...

Providing and fixing PVC S.W.R Gully Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1 6 bed concrete 150mm thick with 1 3 6 plastering ...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends metal/ PVC Junction boxes adhesive paste etc. and running before concreting the sl...

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends metal/ PVC Junction boxes adhesive paste etc. and running before concreting the slab. The conduit ...

Supplying and fixing PVC/metal conduit Deep junction box. 19/20 mm deep Junction box

Supplying and fixing PVC/metal conduit Deep junction box. 25 mm deep Junction box

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing met...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing met...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing met...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood/ panel board using necessary screws bolts nuts necessary phase separators handle and wiring complete. Protection of Overlo...

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane PUR gasket with suitable ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ON/OFF energy cross 3 with Short circuit breaking capaci...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ON/OFF energy cross 3 with Short circuit breaking capaci...

Supplying fixing and wiring Residual current circuit breaker RCCB 240/450V upto 300mA sensitivity on existing wood/ panel board. 32 40A 1pole

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolic/FRP/DMC insulator whi...

Supplying exhaust fan of 1440 RPM of 300 mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz AC Supply.

Supplying of Ceiling Fan with Capacitor rating As perguideline of BEE 5 star rating and IS 374/79 and also comply with IS 1709/1984 with latest amendment Rated voltage 220 V/50 Hz Rated power input 48...

Supplying of .....feet PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CRI 80. Power Input 220 240V 50/60...

Supplying of .....feet PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CRI 80. Power Input 220 240V 50/60...

Supplying and fixing retrofit type PL LED Lamp ...... W LED linear source with CCT 6500 degree K CRI 70percentage. efficacy 80 lumen per W life 25000 burning hours and Compliance to IS 10322/IEC 60598...

Supplying fixing wiring earth electrode for grounding conduits I.C. cutouts and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be...

Fixing all types and all capacities of fluorescent /false ceiling /spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076 twin twisted PVC insulated wires requi...

Fixing all types and all capacities of 1 x4 / 2 x2 LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame using 2310.0076 twin twisted PVC insulated wires ...

Fixing a ceiling /wall mounting fan of all capacities and all types with necessary clA and S hook made out of 15mm dia MS rod with 5 A. ceiling rose of approved quality with necessary length of 23/0.0...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...

Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities.

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps bolts and nuts on existing wooden or metal board including banking of more than one capacitor. upto 5 kVAR

Supplying erecting testing and commissioning of OFF LINE UPS system suitable for operation on 230V 50Hz A/C supply with all accessories complete and Excluding batteries and wiring complete. 1.5 kVA OF...

Supplying installation testing and commissioning of 12V DC AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 60 /65 AH capacity

Fabricating supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2062 for base plate with door opening arrangements i...

Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts nuts etc. complete. Single Arm Bracket with 1500 mm Standard...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps bolts nuts and wiring using suitable capacity wires.

1.1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 ESCOM SR 2023...

HDPE/PLB Pipe 40/33 mm ESCOM SR 2023 24 Item code 66.05 Page No.30

Laying of UG Cable of various sizes using Winch Machine

ESCOM SR 2023 24 Item code 28.05 Page No.56 Laying of UG Cable in Existing Conduit Pipes HDPE Pipe in Concrete Roads/Tender Sure Works

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts nuts and washers.

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts nuts washers and wiring etc. complete with AC 3 Rating and as per IS 13947. 40 A

Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps bolts nuts etc. with provision for fixing suitable type capacity MCB s single phase/3 pha...

Earth work excavation by manual means for drains canals waste weir draft approach channels key trench foundation of Bridges and such similar works as per drawing and technical specifications including...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping/ welding joints tying with bi...