Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.1 LAdmitted-Finance | -21.90% | ₹1.1 L | L1 | Admitted-Finance |
| 2 | L2₹1.2 LAdmitted-Finance | -15.30% | ₹1.2 L | L2 | Admitted-Finance |
| 3 | L3₹1.4 LAdmitted-Finance | -2.08% | ₹1.4 L | L3 | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | - | Not Admitted-Fee/PreQual/Technical EMD/Fee not received |
Updated dates
Tender Value
₹1.5 L
EMD Value
₹2,940
Closing Date
4 May 2026, 4:00 pmClosed
Assistant Engineer, Civil Division I, PGIMER, Chd
Assistant Engineer, Civil Division I, Sector 12, PGIMER, Chd
Providing Aluminium Closed Cabinet outside Room No.3002 and 3005 Faculty Office ,Block C at Advance Cardiac Centre ACC, Sector 12, PGIMER, Chandigarh
2026_PGIME_905650_1
PGI/Engg./AE-II/2026/03
Open Tender
Civil Works
30 days
ACC sector 12, PGIMER
As per tender document
2 documents required · 2 mandatory
₹0
₹2,940
Yes
8 May 2026
17 Apr 2026
6 May 2026
17 Apr 2026
4 May 2026
17 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. | ||||||
| 2Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete | ||||||
| 2.1 | 150x10 mm | - | Nos. | - | - | BI01010001010000000000000515BI0100001115 |
| 3Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | ||||||
| 3.1 | For fixed portion | - | - | - | - | BI01010001010000000000000515BI0100001117 |
| 3.2 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | Kg. | - | - | BI01010001010000000000000515BI0100001118 |
| 3.3 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | - | - | - | - | BI01010001010000000000000515BI0100001119 |
| 3.4 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | Kg. | - | - | BI01010001010000000000000515BI0100001120 |
| 4Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. | ||||||
| 4.1 | Pre-laminated particle board with decorative lamination on both sides | - | Sqm | - | - | BI01010001010000000000000515BI0100001122 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.33 MB
BOQ_951935.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid