Renovation And Modernization of Head Regulator Bam Sub Minor offtaking RD 41904-L of Bhagsar Minor

Dismantling brick work, tile masonry or tile lining (in cement mortar).

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification. (Sandy material)

Plain Cement concrete M10 1:4:8 with Stone aggregate 40 mm gauge mixing by mechanical means using concrete mixer volumetric type.(Mechanical means)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe-500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per PWD specification.

Excavation in soil (any type) using Hydraulic Excavator CK 90 hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirement of lines, grades and cross sections, including all lifts and combined lead up to 30 m. (Rehandling of earth)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Making dewatering arrangements inclusive of running, operation and maintenance of equipment to provide dry condition at working place for lining, longitudinal /transverse drain etc & provision of digging & filling of drains for disposal of water as per the instructions of the Engineer incharge. The rate shall be inclusive of filter material, if required, to be provided to prevent fine particles in the adjecent ground to be carried away by flowing water and to prevent clogging of the system. (Making Bore & installation of pumping set for dewatring arrangement complete in all respect.)

Making dewatering arrangements inclusive of running, operation and maintenance of equipment to provide dry condition at working place for lining, longitudinal /transverse drain etc & provision of digging & filling of drains for disposal of water as per the instructions of the Engineer incharge. The rate shall be inclusive of filter material, if required, to be provided to prevent fine particles in the adjecent ground to be carried away by flowing water and to prevent clogging of the system. (Providing Running and maintenance of pumping set 8 H.P./ Generator set for dewatering arrangements complete in all respects).

Providing Tractor 24 H.P. for running 4” x 4” pumping set for open dewatering

BRIDGES- FOUNDATIONS & SUB- STRUCTURE (21.1) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (B) Mechanical Means (a) Depth upto 3 m

Sub Estimate Gate & Gearing System HR Bam Sub Minor

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 12 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/44)

Supply, Providing and fixing of Stainless steel Bolts & nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

Providing & fixing of Galvanized nut & bolts of all size & length required

CI Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects.

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 55mm dia

Supply and fixing of spindle cover

Providing & fixing clamp plate, complete in all respects.

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Applying priming coat with metal primer on new steel or iron work including preparation of surface. Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Providing and fixing Skin Plate 8 mm

Providing and fixing ISMC

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of Mobil Oil

Providing and fixing of chequred plate

Providing and fixing M.s Plate i.e Stiffner Plate, , Top Base Plate, bottom base plate, ladder base plate, Square bar, flat plate Etc

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Providing and fixing Sqaure hollow section

Providing and fixing Stainless steel flat, complete in all respescts.

Providing and fixing ISMB

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge

Overhauling of gate mechanism of all types including dismantling, greasing, oiling and re-installation of mechanism complete in all aspects upto 10 feet width of gate

Providing and fixing ISA

Providing and fixing GI pipe 50NB

Any other item

SHREE BALA JI TRADING (BID ID -710931)