Supply, Installation, Testing, Commissioning and Handing over of Medical equipments for 1st Renewal for Medical College Churu Rajasthan

Microbiology Hot air oven & Incubator

Hot air oven - Should have a temperature range of surrounding plus 10  2 degrees to 320  20 degree Should have advance preheating system The exhaust flap shall be controlled by Electromechanical control Chamber should be of stainless steel Should work on convection mode which is natural The Approximate volume is around 110 Ltr Should have lcd display and system controller. Should have USB port for recording data Should have 24 point temperature calibration Should have Temp Uniformity at 150 degree : 20.05 K Should have Temp fluctuation at 150 degree : 0.40.005 K The Recovery time after 30 second door opening at 150 degree shall be 18 to 22 min. Demonstration of equipment may be asked prior to opening of financial bid It should have class 2 safety device. European CE or USFDA certified and capable of validation as per international standards Electrical safety conforms to standards for electrical safety IEC-60601 / IS- 13450

INCUBATORS. - Should have a temperature range of surrounding plus 5  2 degrees to 100  10 degree Should have advance preheating sytem The exhaust flap shall be controlled by Electromechanical control Should have class 3.1 safety device. Chamber should be of stainless steel Should work on convection mode which is natural Approximately 110 Ltr Should have lcd display and system controller. USB port for recording data Should have full size inner glass door 24 point temperature calibration Temp Uniformity at 37 degree : 0.40.05 K Temp fluctuation at 37 degree : 0.10.005 K Time to heat up to 37 degree 57  2 min. Demonstration of equipment may be asked prior to opening of financial bid European CE or USFDA certified and capable of validation as per international standards. Conforms to standards for electrical safety IEC-60601 / IS- 13450 Shall be supplied with one Air Conditioner of 2 tonne