REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION, FITTINGS, FIXTURES INCLUDING EARTHING AND GARDEN LIGHTS AT BAITHKOL, KAMAT BAY, LITTLE BINAGA, NOM, NEW MAP QTRS (LITTLE BINAGA ) AT NAVAL BASE KARWAR.

Amount

Rectifying the defects in domestic fluroscent tube/LED light fittings any type and at any height, ceiling rose, electric bell by tightening loose connections and rectifying defects, testing complete all as specified and directed.

Opening switch mounting plate at normal height upto 1.5 meter, rectifying the defects in fittings and fixtures such as switches, bell push, fan regulator, sockets etc by tightening loose connections, refixing switch plate and testing complete all as directed. Note for Item No 1 & 2 :- The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fitting and fixtures functional. If replacement of parts/items is required to make the fittings functional, the cost for labour and material for the same will be measured and paid for as "S&F in repairs" under relevant items of this schedule hereinafter and in such cases the above items will not be measured and paid for.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for surface point wiring 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & caping medium grade with all accessories in wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for the following:-

(a) One light/fan point controlled by one switch

(b) One 3 pin socket outlet 5 Amp on same board with other switches.

(c) One 3 pin socket outlet 5 Amp on independent board.

(d) One bell point controlled by one push button on the same board with other switches or independent with cables of 1.5 Sqmm size.

M&L for point wiring with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in PVC casing caping including CI/MS/ PVC sunk boxes for mounting of 3 pin modular switch socket outlet 15/20 Amp on independent board with frame plate sheet cover of adequate size and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge.

All as per item No.5 above but with cables 4 Sqmm for one 3 pin socket outlet 15 Amps on independent board

M&L for point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in existing conduit complete all as specified and directed by Engr-in-Charge.

(a) One light/fan point controlled by one switch

(b) One 3 pin socket outlet 5 Amp on same board with other switches.

(c) One 3 pin socket outlet 5 Amp on independent board.

(d) One bell point controlled by one push button on the same board with other switches or independent with cables of 1.5 Sqmm size.

All as per item No.7 above but with cables 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board

All as per item No. 7 above but with cables 4 Sqmm for one 3 pin socket outlet 15 Amps on independent board

Taking down submain wiring cable of any size/type alongwith earth wire with or without concealed/surface conduit/casing caping complete all as specified and directed.

M&L sub main wiring with proper colour coding, FRLS PVC insulated copper conductor, unsheated, multi-stranded, copper conductor, cable of two runs, 6 Sqmm for phase and neutral and one run of 6 Sqmm for earth wire, drawn through and including PVC casing and caping with all fittings like tee, bends, junction box/terminal box fixed on wall/ground/ceiling etc and connected complete all as specified and directed by Engr-in-Charge. (Note :- Phase should be of Red/Yellow/Blue, neutral should be of black and earthing wire should be of green colour. Two run of cable for phase/neutral and one run of cable for earth will be measured and pais as one unit length).

All as per item No 11 above but 4 Sqmm for phase and neutral and one run of 4 Sqmm for earth wire

M&L sub main wiring with proper colour coding, FRLS PVC insulated copper conductor, unsheated, multi-stranded, copper conductor, cable of two runs, 6 Sqmm for phase and neutral and one run of 6 Sqmm for earth wire, drawn through existing conduit and junction box fixed in wall/ceiling etc and connected complete all as specified and directed by Engr-in-Charge. (Note:- Phase should be of Red/Yellow/Blue, neutral should be of black and earthing wire should be of green colour. Two run of cable for phase/neutral and one run of cable for earth will be measured and pais as one unit length).

All as per item No 13 above but 4 Sqmm for phase and neutral and one run of 4 Sqmm for earth wire

S&F in repairs MCB DB SPN, 12 way, 240 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed.

S&F in repairs MCB DB SPN, 8 way, 240 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed.

S&F in repairs MCB DB TPN, 4 way, 415 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed.

S&F in repairs MCB TPN, 6 to 32 Amps, ''C'' series 415 Volts, 3 phase, 10 KA breaking capacity of complete all as specified and directed.

S&F in repairs MCB TPN, 40 to 100 Amps, ''C'' series 415 Volts, 3 phase, 10 KA breaking capacity of complete all as specified and directed.

S&F in repairs MCB SPN, 6 to 32 Amps, ''C'' series 230 Volts, single phase, 10 KA breaking capacity complete all as specified and directed.

S&F in repairs MCB SP, 5 to 32 Amps, ''C'' series 230 Volts, single phase, 10 KA breaking capacity complete all as specified and directed.

S&F in repairs single pole and neutral enclosure with a two pin and earth plug and socket industrial type with one MCB 20 Amp double pole 240 Volts complete all as specified and directed.

S&F in repairs switch piano 5 Amps one way flush type complete all as specified and directed.

S&F in repairs switch piano 5 Amps two way flush type, complete all as specified and directed.

S&F in repairs socket outlet 2 in 1, 5 pin, 5 Amps flush type, complete all as specified and directed.

S&F in repairs switch socket combination 5 Amps, 2 in one, 3 pin, flush type multi purpose complete all as specified and directed. Havells/Anchor/Cona or equivalent.

S&F in repairs switch piano 15 Amps one way flush type complete all as specified and directed.

S&F in repairs socket outlet 2 in 1, 3 pin, 5 and 15 Amps complete all as specified and directed.

S&F in repairs switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal complete all as specified and directed.

S&F in repairs ceiling fan regulator electronic five step type 230 Volts single phase complete all as specified and directed.

S&F in repairs bell push 5 Amps 230 volts AC, single pole complete all as specified and directed.

S&F in repairs bell electric (ding dong bell) 230 volts AC, single phase complete all as specified and directed.

S&F in repairs lamp holder, PVC/polycarbonate type with back plate complete all as specified and directed.

S&F in repair ceiling rose surface bakelite 65 x 50 mm three terminal on and including PVC junction box of suitable size complete all as specified and directed.

S&F in repairs decorative modular switch 6 Amps single pole one way flush type complete all as specified and directed.

S&F in repairs decorative modular switch 6 Amps single pole two way flush type complete all as specified and directed.

S&F in repairs decorative modular socket 6 Amps, 3 pin, flush type, multipurpose complete all as specified and directed.

S&F in repairs decorative modular switch 16 Amps single pole one way flush type complete all as specified and directed.

S&F in repairs decorative modular twin socket 16 Amps, 3 pin, flush type, multipurpose type complete all as specified and directed.

S&F in repair decorative modular ceiling fan regulator electronic five step type 230 Volts single phase complete all as specified and directed.

S&F in repairs bell push 5 Amps modular type complete all as specified and directed.

S&F in repairs of following sizes front plate with base frame for fixing decorative modular switches/ sockets/ regulators etc and matching with existing complete all as specified and directed :-

(a) 2 module

(b) 3 module

(c) 4 module

(d) 6 module

(e) 8 module

S&F in repairs 18 watt LED Square type surface light fittings 1x1 feet including making necessary connection complete all as specified and directed.

S&F in repair LED down light 18 W of size 175 mm x 175 mm, square surface mounted, opaque diffuser including all accessories, complete all as specified and directed.

S&F in repair LED panel 36 W, square surface mounted of size 2'x2' LED luminare with polymer diffuser including all accessories, complete all as specified and directed.

S&F in repair decorative wall light fixture made up of polycarbonate, suitable for 1x10 W LED lamp (B-22 base) with back plate complete all as specified and directed by Engr-in-Charge.

S&F LED tube light fitting 1x18/20 W, 6500 K, 4 feet long including provn of flexible cable 3 core, 23/.0076 from ceiling rose to connector complete all as specified and directed by Engr-in-Charge.

S&F in repair T8 LED tube rod 18/20 W, 4 feet length, 6000K complete with all as specified and as directed.

S&F in repair 10 watt LED box type light fittings 2 feet including making necessary connection complete all as specified and directed.

Taking down ceiling fan of any sweep, dismantling, removing the existing painting and cleaning the surface and painting with white metalic colour including marking MES No on fan with black colour etc and fixing up in the original location connecting up and testing complete all as directed.

Taking down geysers of 25 Ltr capacity removing the existing painting and cleaning the surface and Spray painting with white metalic colour including marking MES No on fan with black colour etc and fixing up in the original location connecting up and testing complete all as directed.

S&F in repairs decorative modular 32 Amps DP switch 2 module one way flush type complete all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep, dismantling, replacing defective part, overhauling, cleaning, greasing, rewinding etc and hanging up/fixing back in the original position, connecting up and testing complete all as directed. Note : (a) The unit rate quoted shall deemed to be included for minor items viz nuts, bolts split pin and rubber wheel etc. (b) Capacitor & bearing shall be measured and sperately under ser item Nos 54 & 55 here-in-after. (c) Rewinding of fan will be measured and paid separately under under ser item Nos 56 to 58 here-in-after. (d) Fan blade will be masured and paid separately under under ser item Nos 59 here-in-after. (e) Fan Down rod will be masured and paid separately under under ser item Nos 60 here-in-after.

S&F in repairs capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed.

S&F in repairs bearing No 6201/6202/6203 suitable for ceiling fan/exhaust fan complete all as specified and directed. Make : SKF/NBC/TATA/FAG or equivalent.

M&L for removing of burnt out copper winding wire from ceiling fan of any make and size of 1200 mm to 1400 mm sweep including cleaning of slots etc and rewinding with super enameled copper winding wire as per existing size/gauge including insulating material, varnishing and drying complete all as specified and directed.

Description all as per item No 56 above but exhaust fan of 300 mm sweep.

Description all as per item No 56 above but exhaust fan of 450 mm sweep.

S&F in repairs Fan Blade for ceiling fan complete all as specified and directed.

S&F in repairs Fan Down Rod of any size as per site for ceiling fan complete all as specified and directed.

S&F in repairs LED lamp/Bulb holder suitable for LED Bulb 9/10/11/13/18 W Cross pin type and 2 pin type all as specified and directed.

S&F in repair LED lamp 9/10/11/13/18 watt 230 Volt cross pin type, White/warm white in colour complete all as specified and directed.

S&F in repair LED lamp 2 pin type 9/11/15 W 230 Volts ISI marked, White/warm white in colour all as specified and as directed.

S&F in repair LED Bulb Warm White pin type 9/15 W 230 Volts ISI marked, all as specified and as directed.

S&F in repair ventilator fan AC single phase 230 V of size 200 mm (PVC body) with louvers shutter (white/Ivory) and connected with flexible cord of size 23/0/0076 stranded copper conductor PVC insulated of length not less than 0.7m complete all as specified and directed.

S&F in repair ventilator fan AC single phase 230 V of size 300 mm (PVC body) with louvers shutter (white/Ivory) and connected with flexible cord of size 23/0/0076 stranded copper conductor PVC insulated of length not less than 0.7m complete all as specified and directed.

S&F in repair exhaust fan AC single phase 230 V of size 300 mm, 1400 RPM (steel body) with louvers shutter grey colour and connected with flexible cord of size 23/0/0076 stranded copper conductor PVC insulated of length not less than 0.7m complete all as specified and directed. Note : Old unserviceable exhaust fan will be deposited in MES store by the contractor.

S&F in repair exhaust fan AC single phase 230 V of size 450 mm, 1400 RPM (steel body) with louvers shutter grey colour and connected with flexible cord of size 23/0/0076 stranded copper conductor PVC insulated of length not less than 0.7m complete all as specified and directed. Note : Old unserviceable will be deposited in MES store by the contractor.

S&F in repair ceiling fan AC single phase 230 V of size 1200 mm sweep with blade white/brown and connected with flexible cord of size 23/0/0076 stranded copper conductor PVC insulated of length not less than 0.7m, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note : Old unserviceable ceiling fan will be deposited in MES store by the contractor.

S&F in repair wall mounted fan AC single phase 230 V of size 400 mm sweep with blade white and connected with flexible copper cord of suitable size of length not less than 0.7m complete all as specified and directed. Note : Old unserviceable wall mounted fan will be deposited in MES store by the contractor.

S&F in repairs heating element 1.5 KW of storage type water heaters (geyser) embedded type nickel plated duly mineral filled, ISI Marked complete all as specified and directed.

S&F in repairs heating element 2.0 KW of storage type water heaters (geyser) embedded type nickel plated duly mineral filled, ISI Marked complete all as specified and directed.

S&F in repairs thermostat adjustable between 30 degree C to 85 degree C for geyser complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450 mm long (heavy duty) with 2 Nos PTMT nut and washer for cold water complete all as specified and directed.

S&F in repairs brass chrominum plated connection 15 mm dia 450 mm long (heavy duty) with 2 Nos brass chrominum plated nuts and washer for hot water complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 600 mm long (heavy duty) with 2 Nos PTMT nut and washer for cold water complete all as specified and directed.

S&F in repairs brass chrominum plated connection 15 mm dia 600 mm long (heavy duty) with 2 Nos brass chrominum plated nuts and washer for hot water complete all as specified and directed.

S&F in repairs PVC insulated and sheathed copper multistranded cable three core 2.5 sqmm, heavy duty and connected from plug top to geyser as per site requirement complete all as specified and directed

M&L for earthing complete with galvanized cast iron earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanized earth lead 4 mm dia by means of bolts, nuts washers and check nuts of steel/GI duly protected with 15mm bore light grade pipe upto main board, 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation, earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, char coal dust and common salt in adequate qty all as shown in electrical plate No 3 of SSR Part-I 2009 having pit and cover in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for PCC cover, funnel with wire mesh complete and all as specified. Note :- The unit rate quoted shall be deemed to include for necessary excavation and earth work, PCC 1:3:6 type CI chamber, funnel with GI medium grade watering pipe 15mm bore, RCC cover slabs 50mm thick with 8mm dia CTD bars @ 140mm c/c both ways etc complete.

S&F in repair LED 70W edge series bldg security light fitting pressure die -cast housing with toughned glass and including LEDs with secondary optics and IP 66 protection complete all as specified and directed.

S&F in repair LED Bulk Head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP 65 complete all as specified and directed.

S&F in repairs LED bollard 10W circular cast aluminium bollard with opaque diffuser 900 mm long complete all as specified and directed.

S&F in repair decorative gate or garden light including 1x20 W LED lamp made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22base IP65 complete all as specified and directed.

Supply and fixing in repair iSS LED Linear batten size 4' (Polymer) with smart sensor (auto dimmable) , 20 watt, 230 Volts, completed with all connected accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED strip light 240 V,10w complete all as specified and directed.

S&F decorative mirror light 20W including making necessary connection complete all as specified and directed.

S&F in repair LED round celing light 6 W surface mounted, opaque diffuser including all accessories, complete all as specified and directed.

S&F in repairs PVC Board of all size as per sitte all complete all as specified and directed.

S&F in repairs Dummy plate round type of all size as per site requirment complete all as specified and directed.

S&F in repairs Concealed type 32 Amps DP switch one way complete all as specified and directed.

S&F in repairs NRV Valve for geyser as per existing size complete all as specified and directed.

MARUTI AUTO MOBILE ENGINEERING (BID ID -3165920)

PEGASOS ENGINEER TRADERS (BID ID -3163877)

BRO TECH ELECTRICAL & ENGINEERING SOLUTION (BID ID -3167093)

HARSHITA MARINE SERVICES (BID ID -3166195)

SHRI MALLIKARJUN BATTERY AND ELECTRICAL WORKS (BID ID -3172234)