Loading…
Loading…
Tender Value
₹64.8 L
EMD Value
₹1.3 L
Closing Date
26 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
S AND T
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited 1) Three similar works each costing not less than the amount equal to 30% of advertised value of tender,or 2)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or 3)One similar work costing not less than the amount equal to 60% of advertised value of the tender. In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity
Similar Nature of work- Any work of supply and installation of Train Indication Board / Coach Guidance system/ PA system/ Clock/ IPIS/ Touch screen enquiry system/ Display Board in any government organization/PSU. Ref: (ECR/HJP letter No- ECR/S&T/Policy/200(SNW)/L/880 Dtd 11.05.2018)
27 conditions · 8 needing a document upload
The tenderer whether sole proprietor, a company or a partnership firm / joint venture (JV) / registered society / registered trust etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm andThe tenderer whether sole proprietor, a company or a partnership firm / joint venture (JV) / registered society / registered trust etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm and sign "No Claim Certificate" and refer all or any disputes to arbitration. sign "No Claim Certificate" and refer all or any disputes to arbitration.
Contractors are allowed to make payments against this tender towards bid security only through only payment modes available on IREPS portal like net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are not allowed. The firm can also submit Bid security in the form of Bank guarantee Bond from a scheduled commercial Bank
If the bidders opt for submission of Bank Guarantee towards Bid security, the original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids) (As Per Rly. Bds Letter No. 2022/CE-I/CT/GCC-2022/Policy dated 20.10.203, Advance Correction Slip No. 5
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) / Registered Society / Registered Trust etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) In case tenderer is other than sole proprietorship firm, following documents shall be submitted by the tenderer: (a) Partnership Firm: The tenderer shall submit (i) a notarized copy of Partnership Deed or a copy of partnership deed registered with the registrar. (ii) a copy of Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. (b) Joint Venture (JV): The tenderer shall submit documents as mentioned in Clause 17 of the Tender Form (Second Sheet). (c) Company registered under Companies Act-2013: The tenderer shall submit (i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (d) LLP (Limited Liability Partnership) Firm: If the tender is submitted on behalf of a LLP Firm registered under LLP Act-2008, the tenderer shall submit alongwith the tender- (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (e) Registered Society & Registered Trust: The tenderer shall submit (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society etc. shall be neither asked nor considered, if submitted. (v) A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor
The balance sheet and all other financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN ( Unique Document Identification Number), failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Tenderers are required to scrutinize carefully all clauses appearing in the Tender documents before uploading their bid
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under
In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of up to two years
Railways reserves its right to either cancel the tender or reject any or all the tenders without assigning any reasons thereof
The firm should upload Shiamak Kalyan report on website 'www.shramikkalyan.indianrailways.gov.in regarding payment of engaged labours, Deduction of PF and ESIC ( if applicable) and the same should be attached at the time of raising of bill. Other wise bill will not be processed further.
The contractor shall also employ competent Qualified Graduate Engineer or Qualified holder Engineer. Note- The list of employee with certificate( Diploma/Graduate Engineer) must be produced in the office of Sr. DSTE/DNR or to be uploaded on IRWCMS which must be digitally signed by competent authority of the firm before making of agreement
The payment clause has been elaborated in para no- 40 of the special condition of contract of tender document details. In which it is clearly mentioned that in the running bill, (90 % of either purely supply, Supply & execution/Installation , purely execution items) will be paid to the contractor after submission of Challan, applicable inspection certificate , warranty certificate of respective OEMs & execution certificate from site of the item concerned. Note- In case of supply and execution items, payment would be done only after execution of concerned item and after submission of execution certificate from site engineer duly signed by concerned sectional officer with warranty certificate issued by OEM for active items in the schedule.
General Conditions of the Contract (GCC), April 2022 with latest amendment/ correction slips is applicable to this contract.
For all active items Warranty certificate from OEM is mandatory. Without Warranty certificate, the Materials will not be accepted by consignee.
Provision of interactive panel for classroom program in training room and upgradation of display system in seminar hall at CSSH Patna under Danapur division
DNRSnTTele2025-18~ECR
DNRSnTTele2025-18
Open
Works - General
6 Months
Patna, Bihar
₹0
₹1.3 L
26 Dec 2025
3 Dec 2025
12 Dec 2025
35 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 64,78,928.93 | ||
| — | 1.00 | — | — | ||
| SITC of 86 Inch Display Interactive Panel with CPU, Display Technology In-Plane Switching (IPS), OS - Android, Anti-Glare LCD with Edge- lit LED, Inbuilt CPU with Slot Provision for Open pluggable Specification (OPS), Number of Cores 4, Memory (in GB) 8, SSD Storage Capacity (in GB) 64, Contrast Ratio 1100 : 1, 4K UHD - 3840 x 2160, Display Brightness (in Nits) 450, Aspect Ratio 16:9, Input HDMI Ports 3, Output HDMI Ports 1, USB 2.0 Ports 1, USB 3.0 Ports 4, RS-232 C Ports 1, Audio Input Ports 1, Audio Output Ports 1, RJ 45 ports 1, Touch Sensitive as well as Pen Driven, Touch Technology Infrared (IR), Bluetooth Connectivity Yes. Inbuilt 5.2, Wi-Fi Connectivity Yes. Inbuilt 802.11n (2.4 or 5 GHz), Device Management Software, Power Supply 100-240 V , AC, AC Frequency (in Hz) 50, Power Consumption (in Watts) 345 with warranty 3 Years or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Supply- Inspection Consignee | — | — | — | 3,66,080 | |
| — | 1.00 | — | — | ||
| SITC of Digital Podium -Customised Metallic house structure, powder coated with caster wheels & brakes. Drawer for keyboard, mouse and document camera. Wooden Top Tray for placing document & Laptop. All drawers sliding tray and doors should be Lockable. External Passive Connectivity: Having 2 X 3.0 USB, 1 X HDMI 2.0 LAN Cable, One MIC XLR with minimum 18" Goosneck microphone provision, Power Socket with ON/OFF22"LCD Tablet Monitor with Resolution 1920 x 1080 or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Supply- Inspection Consignee | — | — | — | 4,70,572.2 | |
| — | 1.00 | — | — | ||
| SITC of lapel Wireless microphone - Lockable 3.5 mm jack socket ,Clear and easy focused user interface Long operation time (up to 15 hours), Advanced power management and Li- Ion rechargeable Secure 256 bit AES encryption Remote controllable High speech intelligibility Easy attachment on clothing Mini jack for bodypack transmitters from evolution wireless series, AVX, Speech Line Digital Wireless, XSWireless or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Supply- Inspection Consignee | — | — | — | 1,04,787.54 | |
| — | 1.00 | — | — | ||
| SITC of Handheld microphone - Automatic frequency and interference management Speech optimized condenser microphone capsule Clear and easy focused user interface Long operation time (up to 15 hours) Advanced power management and Li-Ion rechargeables, Secure 256 bit AES encryption. Make- Shure or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Supply- Inspection Consignee | — | — | — | 1,39,833.54 | |
| — | 4.00 | — | — | ||
| SITC of Two Way Compact Wall Loudspeaker for indoor & outdoor uses with 5.25 inch - 6.5 inch LF; Should have Frequency Range 63Hz- 19kHz o rmore; Power rating 75Watts - 90Watts Continuous or more; Max SPL (pk) 116dB or better; Should have 70/100V Transformer taps 30W, 15W, 7.5W ormore; 100- 120 degree (H) x 100-120 degree (V) or better coverage; etc. or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Supply- Inspection Consignee | — | — | — | 80,478.36 | |
| — | 1.00 | — | — | ||
| SITC of Dual channel Power Amplifier with 300W or more per Channel Power output; should support Built- in 70V and 100V for transformer based loudspeakers; Number of Output Channels: Two ormore; Insertion Loss (70V & 100V outputs) :1 dB maximum; Input Sensitivity (8 Load) :Balanced line input: 775mV; Frequency Response (8, 20Hz - 20kHz , tone controls: +/- 1.0 dB;T.H.D. less than 0.5%; Signal-to- Noise Ratio : 97dB orbetter; Maximum Input Level :+22dBu; Crosstalk <-70dB; support have one RS232 port for controls; etc. or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Supply- Inspection Consignee | — | — | — | 70,888.5 | |
| — | 1.00 | — | — | ||
| SITC of 08 Channel Analog Mixer - 2 configurable auxiliary buses, XLR-type and ¼" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on mono inputs, 2-band EQ on stereo inputs, TRS insert sockets and inserts on all mono inputs and mix output, Ten- segment LED output metering, Intuitive and comprehensive solo system, Headphone output, Easily rack mountable or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Supply- Inspection Consignee | — | — | — | 42,357.87 | |
| — | 1.00 | — | — | ||
| SITC of 18U Rack, Rigid frame construction, FRONT AND REAR VENTED DOOR, Steel door Rescissible I8" Angles, Compatible with standard I8" accessories Load rating of 100 kgs Top Cover with gland plate and single fan cut-out Powder coated in Black shade, Width: 600mm Depths: 800mm or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Inspection Consignee | — | — | — | 51,294.6 | |
| — | 1.00 | — | — | ||
| SITC of Speaker cables and cable laying with PVC Pipes and accessories | — | — | — | 19,912.5 | |
| — | 1.00 | — | — | ||
| SITC of Active LED Wall LED screen of Pixel Pitch : 2.0 MM or better, Minimum Size: 173" Diagonal (12 x 7 )ft or Higher in 16:9, Cabinet Size: 970x260x40 mm and total cabinet- 50 ,with predefined resolution according to pixel pitch. Includes: LED Cabinets, LED Controller & Software Slim Cabinet i.e. 40 mm or less, Viewing Angle 160 / 140 or better , Refresh Rate 3840 Hz or more , Minimum Brightness 800 nits or more, Lifetime 1,00,000 hours or more, Contrast TYP 7000:1 or more, controller , structure, Basic Installation Included with warranty 2 Years or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Inspection Consignee | — | — | — | 37,63,200 | |
| — | 1.00 | — | — | ||
| SITC of UHD+ 8x8 HDMI Matrix with Audio Output, Input Port-8 HDMI, Output Port - 8 HDMI, 8 Unbalanced Stereo (3.5mm), Control Port-1 Control (RJ-45), 1 RS232 (DB9), 1 IR IN (3.5mm), Service Port-1 USB (Type-A), HDMI Compliance- HDMI 2.0 (DVI 1.0), HDCP Compliance-2.x, Input Signal Types- 4096x2160p@ 60 8-bit YUV 4:4:4, Output Signal Types- 4096x2160p@ 60 8-bit YUV 4:4:4, Digital Formats-HDMI 8CH LPCM, Bitstream, HD Bitstream, Analog Formats- Unbalanced 2 Channel, Power Supply-24V/6.25A, Power Consumption-70W. Atten or similar/better. (Materials must be supplied as per technical specification attached as annexure-AA) Inspection Consignee | — | — | — | 3,02,316 | |
| — | 7.00 | — | — | ||
| SITC of HDMI Male to HDMI Male Cord 2.0 V (15 Meter) 19pin High- Speed HDMI Cable. | — | — | — | 28,910 | |
| — | 6.00 | — | — | ||
| SITC of HDMI 2.0 Male to HDMI 2.0 Male Hi-Speed Cable - 20 Meters - 2.0 Version | — | — | — | 37,665.6 | |
| — | 5.00 | — | — | ||
| Supply & installation of 55" Professional Large Format Display with On Site OEM Warranty . Make Sony model FW-55BZ40L or similar. (Materials must be supplied as per technical specification attached as annexure-AA) Inspection Consignee | — | — | — | 4,04,352.95 | |
| — | 2.00 | — | — | ||
| Supply & installation of 5 KVA Online UPS with batteries having the following specifications (1) Inbuilt isolation transformer. (2) Input power of single phase (160V-270V), Sinewave, 50Hz.(3) Output power ofsingle phase 230V +or- 1%, sinewave,50Hz. (4)With Battery of Backup Time 180 Minutes 5 KVA ONFINITI FMI - 180MIN (24000VAH) SMF VRLA or similar/better (5)Degree ofProtection: IP 21. (6) SMF-VRLA Batteries conforming to ISC:8702(Pt.I,II&III).(7) Minimum warranty of 3 years for UPS and 2 years for Batteries. Make- Microtech/NUMERIC or better as per instruction of site engineer. (Materials must be supplied as per technical specification attached as annexure-AA) Inspection Consignee | — | — | — | 3,48,388.62 | |
| — | 2.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of maintenance console/ work station for monitoring (HP Core i5 10400 8GB/ 500 GB SSD/ Windows 10 Professional or similar make-HP or better) as per instruction of site engineer. (Materials must be supplied as per technical specification attached as annexure-AA) Inspection Consignee | — | — | — | 1,43,469.5 | |
| — | 1.00 | — | — | ||
| Installation, testing, commissioning, Programming charges of Audio Video Project. | — | — | — | 1,04,421.15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .