Construction of New Women Rest Room with Toilet Facility G PLUS 1 for Taluk Police Station and Traffic Police Station at Ambur in Tirupathur District.

E0001: Earth work excavation for foundation in all soils (including refilling) a) 0 to 2m depth.

F0040: Supplying and filling in foundation and basement with filling crushed stone sand

CSMP0002: Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer

CSMP0004: Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer

BMP0006: Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) Foundation and Basement.

BMP0007: Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” a. Ground Floor

b. In First Floor

BMP0008: Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Kiln burnt country bricks of size 8¾”x4¼x2¾” a. In Foundation and basement

b. In Ground Floor

c. In First Floor

BMP0008: Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Kiln burnt country bricks of size 8¾”x4¼x2¾” b. Ground Floor

c. In First Floor

J0029: Supplying of Mild steel hold fasts horizontally twisted of size 230x40x4mm

FLMP0001: Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly and top left rough to receive the floor finish with required slopes including ramming, curing etc., all complete complying with relevant standard specifications.

FLMP0002: Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0025: Weathering course with concrete broken brick jelly 20mm gauge

FLMP0004: Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

PLMP0001: Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

FLMP0002: Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

PLMP0003: Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0005: Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

PA0001: White washing three coats using clean shell lime slaked

GR0001: Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure

PA0022: Painting the new wood work with two coats of approved first class synthetic enamel

PA0026: Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

MS0003: Supplying and fixing of Aluminium Towel Rail of 75cm

MS0006: Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007: Providing and fixing iron Chromium plated 8 gauge Picture hooks

WS0004a: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Mark (a)700 litres

WS0006: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

SAMP0003: Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

EL0074: Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook of 100mm dia, 75mm depth and 3mm thick including cost and fixing in position etc., complete and as directed by the depatmental officers

EL0174: Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan)

EL0075: Supplying and laying of 8 SWG GI wire for earth connection on wall

RE0006: Providing Pre-Constructional Antitermite treatment

EL0298: Supply and fixing of Electro Mechanically Operated Three phase earth leakage circuit breaker/residual current circuit breaker

CS0037a: supplying and fixing of precast cement concrete slab for cupboard/ward robes shelves, cover slab for chambers, baffle walls side slabs of boxing around windows and other similar works in standardised concrete mix M-20 grade in accordance with is: 456 - 2000 I. 20mm thick (a) In Ground Floor

(b) In First Floor

CS0037a: supplying and fixing of precast cement concrete slab for cupboard/ward robes shelves, cover slab for chambers, baffle walls side slabs of boxing around windows and other similar works in standardised concrete mix M-20 grade in accordance with is: 456 - 2000 II. 40mm thick (a) In Foundation and basement

C0065: Providing and Laying in position, standardised concrete mix m-20 grade a. In Foundation and Basement

b. In Stilt/ Ground Floor

c. In First Floor

RE0005: Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

F0013: Supply and filling in foundation and basement with gravel

F0026: Filling in foundation and basement and other similar works with Excavated earth

FW0004: Providing Form work and centering for reinforced cement concrete works a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

J0001: Supplying and fixing of Teak Wood wrought and put up for frames of doors a) Teak wood over 2.00 metre and below 3 metre length

b) Teak wood below 2.00 metre length

JD0094: Providing T.W. double leaf shutters for Cupboard/ward robes with 9mm thick phenol Bonded BWR grade ply wood

JD0001: Supplying and fixing of Best Indian Teakwood panelled door shutters single leaf in position using 75mm x 37.5mm styles and 4 nos of 150x37.5mm rails (top, middle, bottom and lock rail) 2 nos of 75mmx37.5mm vertical shorter styles and 18.75mm thick planks for panels including cost and labour for fixing the furniture fittings as per schedule ‘E’ etc., complete and as directed by the departmental officers. (As per new design)

JD0073: Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame of size 50X47mm with a wall thickness of 5mm, made out extruded 5mm rigid UPVC foam sheet, mitred at two corners and joined with 2 nos of 150mm long brackets of 15X15mm M.S square tube. The two vertical and horizontal door profiles are to be reinforced with 19X19mm M.S Square tube of 19 gauge with primer coat. The door frame shall be fixed to the wall using 65/100mm long M.S screw through the frame by using PVC fasteners.

FLMP0005: Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006: Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

PA0037: Painting two coats with ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade including a priming coat on cement

PA0042: Painting two coats with ready mixed EXTERIOR EMULSION PAINT

WS0002: Supplying and fixing of 110mm dia PVC SWR pipe Rain water downfall pipe

WS0276: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 20mm ASTM D schedule 40 threaded PVC pipe with necessary UPVC specials

SA0002: Supplying and fixing of Porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm

SA0031: Supplying and fixing the following dia PVC (SWR) pipe and relevant specials including packing the joints with rubber lubricant a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035: Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

WS0033: Supplying and fixing of half turn C.P Long body Tap of 15mm dia

SA0155: Supplying and fixing of CP Two Way Bib Cock with Health Faucet

EL0002: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

EL0010: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0026: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0078: Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"Electric fan 1200mm sweep

EL0190: Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

MS0008: supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of size 500x400x5.5mm

JW0042: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type

JV0022: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators

WS0107: Supplying and fixing of 32mm dia PVC Tee with end cap of best approved quality with IS

SA0048: Supplying, laying and jointing the following dia UPVC Non Pressure pipe a) 110 mm dia UPVC Non Pressure pipe

SA0025: Supplying and fixing EWC superior variety (White) 500mm with PVC SWR grade ‘P’ or ‘S’ trap

EL0070: Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

EL0047: Supply and fixing of 18 watts LED tube light with fitting of four feet long

EL0045: Supplying and fixing of water tight bulk head fitting with guard suitable for 12W LED lamp

EL0070: Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety b) 12 watts LED bulb

FLMP0009: Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring and other similar works in cement mortar 1:3 (one of cement and three of crushed stone sand, including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary pointing the joints with grout (Tile joint filler), curing, finishing etc., all complete and as directed by the departmental officers. (The brand and quality of tiles should be got approved from Executive Engineer before use).

FLMP0011:Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

E0006: Earth work excavation for Open Foundation for drains in all soils and subsoils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary. (Excluding refilling the sides of foundation) and depositing the earth in places shown clearing and leveling the site with an initial lead of 10 metres and lift as specified hereunder etc., complete in all respects complying with relevant standard specification (Excluding Refilling) (Drain having bed width upto 1.25 metre) a) 0 to 2m depth.

Please Enable Macros to View BoQ information