EE/DB/DO/F-MDU/2022

Amount

CIVIL WORKS

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls a.Clean Removal of Cement Plaster

b.Dismantling Plain Cement Concrete

Providing weathering course in brick jelly lime concrete 20mm size in pure slaked lime over RCC roof slab, the projection being 32:12.5 for required depth and laid with required slope and thickness

Finishing the top of roof with one course of pressed tiles of size 23 x 23 x 2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming to IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specifications and as directed by the departmental officers

Plastering with Cement mortor 1:5 (one cement,five sand) with 12 mm thick including cost of all materials,labour charges for finishing and curring etc., complete

Plastering with Cement mortor 1:3 (one cement,three sand) with 10 mm thick including cost of all materials,labour charges for finishing and curring etc., complete

Cement Concrete 1:4:8(one cement,four sand, eight aggregate) using 40mm gauge HBG stone jelly including cost of all materials and labour charges etc., complete - 10m3

Paving the floor with fine polished cuddapah stone slab of 38/40mm thick laid over cement mortar 1:4 (one cement and four sand) 20mm thick over the existing bed of cement concrete 1:5:10 (one cement,five sand and ten aggregate)vand pointing the pointing the joints to full depth of slas with same mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs andother materials to be used shall be got approved by the executive engineer concerned befre use on work, etc., complete complying with standard specifications ( using New cuddapah slab)

Colour Washing two coats with freshly burnt white shell lime in all floors including cost of lime, brushes, scaffolding charges etc., complete complying with standard specification.

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting two coats to existing Old iron works with approval quality and colour complete complying with standard specification.

Supplying and laying of profiled colour Galvolume sheet with combination 55AI:43.4Zn:1,6SI of TCT bend type 0.40 mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile /CR sheets of approved quality for roofing with nessasary fixing arrangements like 65mm abd long hexagonal head screws with EPDM rubber seal, etc., complete complying with standard specification and as directed by the departmental officers,during execution of work

Fabrication supply and erection on angle iron roof trusses using M.S. specials structural steels sections for trusses including etc., complete a.120mmx60mmx6mm box pipe

Fabrication supply and erection on angle iron roof trusses using M.S. specials structural steels sections for trusses including etc., complete b.100mmx50mmx6mm box pipe

Sri Ganesh Constructions