MAINT AND REPAIR TO CERTAIN ROADS INCLUDING CERTAIN MISC ITEMS IN SOUTH SIDE OF RUNWAY IN TECH AREA AT AF STATION BHISIANA UNDER GE (AF) BHISIANA

Amount

Material and labour for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bitumen primer using paving bitumen VG -10 at the rate of 5 Kgs per 10 square metre of road surface laying, rolling, consolidating bituminous pre-mix asphaltic Semi dense concrete (Design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30 grade mixed in hot mix plant, laying with mechanical paver, rolled and compacted to required camber and gradient with 8 to12 tonne power road roller complete all as specified and directed by Engr-in-Charge.

Material and labour for repair to pot holes any depth not exceeding 1.0 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen @ 9.8 Kg per Ten Sqm blinded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot hole exceeding 30mm complete all as specified and directed. Note : GE will inform Accepting Officer for convening a Board of Officers at least seven days prior to execution of this item.

Material and labour for Premix Bituminous Macadam (Design mix) laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with paving bitumen VG-30 grade any penetration @ 4% binder content by weight of total mix complete rolling to uniform smooth surface with 8 to 12 tonne power road roller complete all as specified and directed. Note:- (i) Preparation of surface and priming/tack coat shall be measured and paid separately. (ii) GE will inform Accepting Officer for convening a Board of Officers at least seven days prior to execution of this item.

Material and labour for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bitumen primer using paving bitumen VG -10 at the rate of 5 Kgs per 10 square metre complete all as specified and directed complete all as specified and directed by Engr-in-Charge.

Taking down old broken exisiting cat eyes from existing road of any description and any size and rubbish off the premises out side of MD land complete all specified and directed by Engr-in-Charge.

Supply and fixing cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all specified and directed by Engr-in-Charge.

Taking down old broken exisiting convex mirror from existing road of any description and any size and rubbish off the premises out side of MD Land complete all specified and directed by Engr-in-Charge.

Supply and fixing of convex mirror 1000 mm dia unbreakable polycarbonate with plastic moulded back up frame having provn of mounting in MS pipe light grade 75mm dia & 3000 mm long in which 600 mm embedded in ground with block (size-450mmx450mmx700mm) of PCC 1:2:4, type B-1 using 20mm graded stone aggregate with necessary hold fast & clamps complete all as specified and directed.

Taking down old broken exisiting delineator from existing road of any description and any size and rubbish off the premises out side of MD land complete all specified and directed by Engr-in-Charge.

Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4, type B-1 (150x150x300mm) complete all as specified and directed.

Material and labour for painting lines on road, pavements and the like with adequate no of coats n exc. 10 cm width with road making thermoplastic compoud paint conforming to 'MORTH' specification hot applied with mechanically to form a 1.50 mm thick film on road including cleaning and drying the existing road surface to ensure dust, oil, grease and moisture free surface before applying the thermoplastic paint etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for painting/ marking painting lines/ centreline/ dashes, arrow, letters etc. on road,pavements and the like with adequate no of coats exc. 10 cm width with road making thermoplastic compoud paint conforming to 'MORTH' specification hot applied with mechanically to form a 1.50 mm thick film on road including cleaning and drying the existing road surface to ensure dust,oil, grease and moisture free surface before applying the thermoplastic paint etc. complete all as specified and directed by Engr-in-Charge.

M/s Amit Associates

GARG INFRA PROJECTS

R K GOYAL AND CO

M/s Goyal Builders

NAIB ENTERPRISES

M/s Azure Infrastructure Construction Co.

Aman Enterprises