Repair/Renovation of Panchyat Ghar Kanthi A in Pyt. Kanthi A Block Arnas and District Reasi Under Capex PRI(1st Call)

Amount

Earth work in excavation by manual means trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil 1 meter from cutting edge including all leads, lift and carriage complete

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead Of sectional area 40 sqcm. and above.

Dismantling roofing including ridges, hips valleys and gutters etc., andstacking the material within 50 meters lead of

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including all leads, lift and carriage complete

15mm cement plaster mix : 1 : 6 ( 1 cement : 6 fine sand) Including all leads, lift and carriage complete

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand)Nallah including all leads, lift and carriage complete

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand)Nallah without supply of stone

Random Rubble masonry with hard stone in Plinth and Foundation Level plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah including all leads, lift and carriage complete

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all leads, lift and carriage complete

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(welded) including all leads, lift and carriage complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . Including all leads, lift and carriage complete

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 including all leads, lift and carriage complete

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gram/m2 including all leads, lift and carriage complete

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo / Fir wood Including all leads, lift and carriage complete

Providing Plywood Ceiling 6mm thick commericial ply

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all leads, lift and carriage complete

Dupming of Stone including the cost of stones, all leads, lift and carriage complete

Providing and fixing 2nd class teak wood lipping/moulded beading or Tajbeading of size 18x5mm fixed with wooden adhesive of approved quality anscrews/nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge

Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size )

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete.

Providing and applying white cement based putty of specified thickness of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Centering and shuttering including strutting, propping etc. and removal of form work for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. including all leads, lift and carriage complete

Providing and fixing wooden moulded corner beading of size 50x50 mm (baseand height) of triangular shape to the junction of paneling etc. with iron screws,plugs and priming coat on unexposed surface etc. complete Second class teak wood

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

PURAN COMMUNICATION JIJ

MOHD QASIM

Bariam singh

M/S ARUN DEV SINGH

Mr Vimal Dev Singh