8493/GWL/E8 CERTAIN MISC REPAIR TO DRAINS, FOOTPATH, BOUNDARY WALL FOR OFFRS MD ACCN IN THE AREA OF AGE B/R-II UNDER GE GWALIOR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth in loose /soft soil for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth, complete all as specified and directed.

M&L for Plain Cement concrete type D 2, 1:4:8 (using 40mm graded stone aggregate) in fdn filling and mass concrete complete all as specified and directed.

M&L Brickwork with subclass‘B’ bricks, straight or curved on plan exc 6mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregates as in coping including weathering slightly rounded or chamfered angles throating complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in surface channels/ drain ,etc,complete all as specified and as directed.

Returning, filling in approved soft/loose soil, including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Removing excavated material (soil) n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for (Cement concrete reinforced) complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:4) on brick or concrete surface including finishing the surfaces even and smooth with out using extra cement complete all as specified and as directed.

Demolition of PCC (unreiforced) in ground floor and paving n.exc 15 cm thickness below or above GL including removal of rubbish complete all as specified and as directed.

Dismantling stone slab and tiles and paving of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings,laid in layers n exc 15 cm thick,spread,levelled and rammed incl watering complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x30cmx 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and with pigment laid over and including 20mm th screed bed in 1:4 CM complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 Grade with Grey cement and no pigment, complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for angle iron as in fencing post incl cutting tops to shape as directed, drilling holes, notching for wire etc. Flat iron, fillets ( for securing wire mesh) incl. all necessary drilling bolting or riveting etc. complete all as specified and as directed.

M&L for mild steel round bars 10mm dia and over cut to length bent to shape required and fixing as required in fencing complete all as specified and as directed.

Supply and fixing chain link mild steel galvanised fencing of any size & weight including line wire and provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires,standards, rails straining bolts etc including provision of binding wire complete all as specified and directed.

S & F in repair Galvanised. 2 strand, steel barbed wire in repair 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, over 10cm in width or girth not otherwise described complete all as specified and as directed.

Demolition of brickwork built in cement mortar or cement lime mortar complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

S & F in repair precast cement concrete louvres and jallies, 50 mm thick (measured solid) type B 0 1:2:4 ( 12.5 mm , graded aggregate) set in cement mortar ( 1:4) , in-cluding all mouldings but excluding frame complete all as specified and directed.

M&L rendering 15 mm thick other than fair faces of brick work in CM 1:6 complete all as specified and directed.

M&L for two coat of cement base paint on newly plastered walls incl preparation of new surfaces complete all as specified and as directed.

M&L for three coat white wash or newly plaster , unplastered or concrete surface of wall including preparation of surfaces complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Use and waste of form work to sides of concrete footings, base of columns, raft and raft beams and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, to achieve rough finished surface of concrete flat complete all as specifed and as directed.

M & L RCC 1:2:4 ( Nominal mix ) type B 1 , 20 mm graded aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and waste of form work to sides of posts, pillars, struts, piers, columns and stanchions etc. to achieve fair finished surface of concrete flat complete all as specifed and as directed.

M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) using 20 mm graded stone aggregate as in columns, posts, struts etc. complete all as specifed and as shown on drawing complete all as specified and as directed.

M&L Mild steel bars ( TMT Bars) 5 mm dia and over,upto 8 mm dia in stirrups , spaces ,and binders complete all as specified and directed.

M&L Mild steel bars ( TMT Bars)10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E- 165) quality A complete all as specified and as directed.

Dismantling floor, hearth or wall tiling,stone slabs, kota stone, coocking plateform slabs including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all and as directed.

M&L for, for glazed ceramic coloured tiles size 300x450x6-7mm thick on vertical surface such as skirting, dadoetc. set & jointed in neat cement slurry and pointed in coloured cement to match with shade of tile over & including 10mm thick rendering in CM (1:4) on vertical surfaces as backing coat complete all and as directed.

Arkay Instrumentation

RAJ AND BROTHERS