Construction of new 11/0.44 KV S/S and HT/LT lines and other associated works.

Amount

Loading, carriage & unloading of following materials from centre store Daliganj to work site and its stacking. Distance approx (0-50) kms.

(a) Line Material.

(b) PCC pole 8.5/9 Mtr long

(c) STP Pole 9/11 Mtr. long.

(d) 250/400 KVA T/F

(e)ACSR Rabit/Dog /Racoon/weasel/ conductor

(f) LT PVC Cable 1x400/3.5x 240/630 SQMM

(g)ABC( 3x120/95/70/25/16) Sqmm.

Fabrication, erection of sub-station type double pole on 8.5 mtr long PCC/11 mtr. Long ST pole along with fixing of necessary clamps. Accessories required including supply & fixing of straight MS 100x50mm top channel (2240mm long) one no. dropper channel/Angle 100x50 mm 2 nos. with arrangement of fixing 3 nos. pin insulator as per RESPO specification and direction of E/I. Only pole & insulator supplied by the deppt.

Fabrication, erection T-Off pole single section pole along with T-Off channel clamp disc fitting & pin accessories, grouting in 1:4:8 cement sand and brick ballast as per RESPO specification. Only pole and insulator shall be supplied by the department.

Dragging of ST/PCC Pole from dump store to pit site, digging of pit erection & grouting (As per RESPO norms) of LT support suitable for laying of ABC line on 8.5mtr long PCC pole by providing of necessary eye hook/LT shackle insulator with clamps and its accessories etc. as per RESPO specification. Only Pole will be provided by the department.

Construction of T/F plinth of size 2x2x1.2 meters with help of 1st class bricks and massonary in the ratio 1:4 cement & sand coarse, filling the structure completely as per norms with RCC top 1:2:2 cement, sand coarse, stone grit with MS bar and MS channel for resting T/F. All material shall be arranged by the contractor.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angle the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mess. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with MS flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 02 nos. Straight MS Angle 50x50x6x750 mm- 2 nos., Henely type tailless fuse units 500 Amps. 650 Volts one no. for incoming and other for outgoing, Copper bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet.

Ordinary earthing by MS earth Rod 2500mm long as per RESPO Schedule. Only GI wire& Earth rod shall be supplied by the department.

Laying and sagging of 3 phase 3 wire 11 KV line on ACSR weasel/rabbit/Raccoon/Dog conductor as per RESPO specification and direction of E/I.

Erection & commissioning of (3x120/95/70/25/16 Sq.mm) Aerial Bunched Conductor.

Laying of LT PVC Cable 1x400/3.5x240 SQMM as RESPO specification & direction of E/I.

Earthing of T/F Pipe type with 60 fit deep borring and providing GI Pipe 1.5" dia (60 fit GI Pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI Pipe Cap. All material shall be supplied by the contractor.

Safe Installation of 250/400 KVA T/F on plinth by providing and fixing of all accessories along with making HT/LT connection and its commissioning.

Dismantling of PCC/LT pole its cartage up to JE;s dump store. After sifting Line on new erected pole.

Dismantling of LT/HT line including rolling back its conductor, wire, including stacking & transpiration of these materials form site to JE dump store/Central Store Daliganj, Lucknow.

Providing and fixing of 11 KV DO fuse set along with clamps & nut bolts on existing of double pole.

Providing and fixing of 11 KV TPMO along with clamps & nut bolts on existing of double pole.

Cutting and chopping of tree branches for clearance of HT/LT Line. After clearance line throughout pieces of tree branches of site.

Supply and fixing of clamps.

(a) ALU Crimping Lug 240 SQMM

(b) Copper "L" Piece

(c) Copper Busbar 1000 X 50X 6 MM

(d) Nut Bolt off sizes

(e) Clamp of sizes

(f) Dead end clamps

(g) Eye hook for Dead end clamp

(h) Suspension clamps

(i) PG CLAMP.

(j) S/S Base Angle

POWER CONTROL AND SWITCHGEARS

MEEMANSA ENTERPRISES