Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | I₹17.6 LAccepted-AOC | I | Accepted-AOC L1awarded | |
| 2 | II₹17.9 LRejected-AOC | II | Rejected-AOC L2 | |
| 3 | III₹18.0 LRejected-AOC | III | Rejected-AOC L3 | |
| 4 | IV₹18.0 LRejected-AOC | IV | Rejected-AOC L4 | |
| 5 | V₹19.5 LRejected-AOC | V | Rejected-AOC L5 |
Tender Value
Refer Docs
EMD Value
₹32,300
Closing Date
15 Feb 2021, 10:00 amClosed
Executive Engineer(Maint.)
Executive Engineer(Maint.), HP University, Summer Hill Shimla-5
Providing Pre-Painted sheet roofing over existing RCC Roof in Mens/Womens Hostel of Block No. A and B in H.P.University Shimla-5.
2021_HPU_43982_1
providing prepainted sheet roofing over existing
Open Tender
Civil Works
Item Rate
135 days
HP University Summer Hill Shimla
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Executive Engineer(Maint.)
₹32,300
9 Jul 2021
3 Feb 2021
15 Feb 2021
3 Feb 2021
15 Feb 2021
3 Feb 2021
Amount
Providing and fixing 0.60mm thick pre-painted steel sheet (Jindal /Tata) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick pre-painted steel sheets(Jindal /Tata) in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating including fixing with pre-painted iron J or L hooks, bolts & nuts 6mm dia & pre-painted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges
Providing and fixing 20cm wide 60 cm overall semicircular plain pre-painted steel sheet (Jindal /Tata) gutter with iron brackets 40X3mm size bolts and nuts and washers et. Includjing makig necessary connections with rain water pipe complete as per design. a) 0.63mm thick sheet.
Providing and fixing flushing 38cm overall with 0.60mm thick pre-painted sheet(Tata or Jindal) in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks, bolts and nuts 6mm dia meter & pre-painted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge
Providing and fixing M.S.BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely).
Providing and fixing on wall face PVC(D-Plast) Rain Water Pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including scaffolding upto all height. a)150mm dia pipe
Providing and fixing on wall faces PVC (D-Plast) Accessories for rain water pipes including filling the joints with approved adhesive complete including scaffolding upto all height. a) PVC Plain bend 150mm dia.
b) PVC Shoe 150mm dia.
Providing and fixing M.S.holder bat clamps of approved design to C.I. or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. a) 150 mm diametre
Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: a) In beams, joists, channels, angles, tees flats with connecting Steel work plates or angle cleats as main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.
b)In gratings, framed guards, bars, ladders, railings, brackets and similar works.
Providing and fixing hard drawn steel wire fabric 25x25mm mesh of weight not less than 3.20 kg per Sqm. to existing steel window frame etc. including 20x5mm MS flat acting as beading and including welding rigidly and i/c a priming coat of red lead paint complete in all respects as per direction of the Engineer-in-charge.
Brick work (2nd class) using common burnt clay building bricks in Super –Structure with Cement mortar 1:6 (1 cement: 6 sand).
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping . a) With enamel paint other than white.
Nikhil Bhagra Govt. Contractor
Ved kumar
Sanjay Govt. Contractor
AJAY SHARMA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .