CERTAIN B/R REPAIRS TO JOINERY, LEAKAGE, SEEPAGE, FENCING, AREA DRAINAGE AND ALLIED WORKS AT NSRY UNDER GE HADDO, SRI VIJAYA PURAM

Amount

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.

Ditto all as per item No 03 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Ditto all as per item No 06 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Ditto all as per item No 08 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 600x450x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n.exc 1.5 Sqm each complete all as directed.

Taking down Aluminium doors, Windows chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each all as directed.

Taking down Aluminium doors, Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each all as directed.

Providing and fixing factory made uPVC white colour Sliding window area not exceeding 2 sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of sliding doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long. complete all as specified and directed.

S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as specified and directed.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed.

S&F in repairs to Brass chromium plated 32mm dia bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

M&L for HDF boards (fire & water proof) of 19mm thick as in CB, cabinet, shelves etc & the like with an including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surface complete all as specified and as directed.

S&F auto hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets,CB , Shelves etc complete all as specified and directed.

S&F contineous (Piano) hinges mild steel bright finish or electrogalvanised, width of flaps 40 mm complete all as specified and directed.

Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane. complete all as specified and directed.

Supply only plain sheet glass 5.5 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum Door shutter exc 0.5 Sqm in each pane. complete all as specified and directed.

Supply only Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed

Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane. complete all as specified and directed.

S&F Prelaminated particle board 12 mm thick, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S&F in repairs aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for rendering 15mm thick in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement all as specified.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).

M&L for preparing old plastered surfaces of walls and applying one coat of oil bound distemper including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. Complete all as specified.

M&L in repairs Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame of aluminium tubular section 25x50mm.20.0mm thick, dully fixed to wall/ceiling with expansion fastner, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall etc. compete as specified and as directedNote: Necessary MS scaffolding required for work shall be deemed to be included in the quoted rate.

Demolition of cement concrete of any description and in sunken floor /roof padding etc not otherwise specifically provided for complete all as directed.

M&L for PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement complete all as specified. (Note : WPC shall be measured and paid separately)

M&L 12 mm thick Plaster on RCC roof slab and sunken portion with CM ( 1:3 ) including water proofing compound @ 3% by weight of cement shall be carried out as specified. (Note : WPC shall be measured and paid separately)

M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof, sunken slabs, edges and vertical surfaces complete all as specified

M&L for applying a coat of reflective bituminous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed.

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out hard/dense soil, returning filling in and ramming earth or Brocken rubble mixed with earth around, in layers not exceeding 25 cm

M&L for cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) for post, struts (including caps) including weathering, slightly rounded or chamfered angles and throating and including necessary form work all as specified and directed

Dismantling structural steel work complete all as specified.

Supply & fabricate and fixing in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)). complete all as specified and directed.

S&F for MS Galvanized with 1.0mm thick PVC coated chain link fencing 50mm x 50mm over 3.15mm GI wire all as specified

S & F for 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel mpaint over a coat of red oxide complete all as specified and directed.

M & L for Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends each screw-wed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long diameter of neck in exc 16mm and n.exc 20 mm complete all as specified and directed.

M&L for preparation on newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. complete all as specified.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed.

Demolition of Reinforced manhole, Drain over cover slabs in similar works etc complete all as specified

M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover slab set in cm 1:6 all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars. complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for cement concrete1:2:4 Type B-1 Using 20mm graded stone aggregate as in surface channels or drain complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in cooping in lintels upto 1.5m clear span, cills, steps; seismic and other similar ands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water roughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for Forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including borms, moulds, mitres/ stopped ends etc complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be measured and paid separately)

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed

S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified

Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out if reqd.complete all as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.

S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius

S&F for 75 mm PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal complete all as specified.

S&F for 75 mm PVC (SWR) branch piece, single (Single Y) of radius equal or unequal complete all as specified .

S&F for 75 mm PVC (SWR) vent cowl complete all as specified.

M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified.

S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete.

S&F in repairs under counter wash basin vitreous china ware white in colour including brackets, waste fittings, and all necessary inlet, out let connections complete. Jaguar cat No FNS WHT 40701 or equivalent in Parryware, H&R Johnson

S&F in repairs counter top wash basin vitreous china ware white in colour including brackets, waste fittings, and all necessary inlet, out let connections complete. Jaguar cat No JDS WHT 25907N or equivalent in Parryware, H&R Johnson

S&F in repairs 15 mm bore auto closing pillar taps with 65mm ext body , cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts (Make :Jaguar Cat No. PRS-031L65 or equivalent) in Prayag / Parryware.

S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia(Make :Prayag Cat No. PIS-08H) or equivalent in Parryware / Jaquar.

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cart Part No PIS-12 H) or equivalent in Parryware / Jaquar.

S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make :Prayag Cat No. PIS-10 H) or equivalent in Parryware / Jaquar.

S&F in repairs conceled stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle,fixed for 15mm bore of pipe with long shank and cup (Make : Jaguar Cat No. CON 1081A) or equivalent in Parryware / Prayag.

S&F in repairs vitreous china ware wash down white water closet pan with UF soft close slim seat cover including connecting to drain and flushing pipeof size 360 x500x335mm complete all as specified. (Jaguar Cat No KUS-WHT-35953814UFSM or equivalent) or equivalent in Parryware / Hindware

S&F in repairs UF soft close slim seat cover including necessary fittings to existing WC complete all as specified.

S&F in repairs vitreous china ware urinal with aerator including connector pie and connection to drain complete all as specified and directed (Jaguar Cat No URS-WHT-13253N or equivalent in Parryware / Hindware

S&F in repair single piece concealed cistern including cutting of tiles and repairing to the damaged tiles as before complete all specified and as directed (Jaguar cat no JCS-WHT-2431FP or equivalent in Parryware / Prayag.

S&F in repair CP Control plate for concealed flushing cistern including fitting and repairing to all around tiles complete all specified and as directed (Jaguar cat no KUBIX-JCX-CHR-352415 or equivalent in Parryware / Prayag.

S & F in repairs Brass chromium plated towel ring with round flange. (Make Prayag Cat Part No. BA-11) or equivalent in Jaquar / Prayag.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange. (Make Prayag Cat Part No. BA-70) or equivalent in Jaquar / Prayag.

S&F in repairs Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook. (Make Prayag Cat Part No. BEA-41) or equivalent in Jaquar / Prayag.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed.

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified.

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and directed.

S& F in repairs 20mm to 25 mm dia, Harrison rails, powder coated anodized aluminium alloy with fancy type fixing curtain brackets, stops, rollers etc complete all as specified and directed.

S & F in repairs for wall mixer 3-in-1 system with provision for both hand shower and over head shower composite with 115 mm long bend pipe connecting legs & wall flanges Mixer (Make: Prayag Cat No PIS-80H), hand shower including 1.5 mtr flexible tube with hook Cat No BHS-87, and over head showerwith arm and flange(300mm) of cat No BOS-90. complete all as specified and directed.

S&F in for Corner glass self assembly size 300mm with chromium plated bracket guard and railing (Make: Prayag Cat No. BEA-44) or equivalent in Parryware / Jaquar

S&F in repairs CP overhead shower dia 125 mm overhead shower round with revolving joints (with body rotation) & 225mm long arm shower with rabit cleaning system and all fittings Make - Prayag BS-76 as approved. or equivalent in Parryware / Jaquar.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as directed.

S&F 20 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F 25 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.

M/s K Moorthi (BID ID -3204306)

M/S VISHAL CONSTRUCTION (BID ID -3205100)

SKV Engineering (BID ID -3204529)

CHANDER SEKER ENTERPRISE (BID ID -3204612)

JD Construction (BID ID -3205598)

M/s Prem Enterprise (BID ID -3203536)

CARTWHEEL CONSTRUCTION (BID ID -3205468)