Addition/ Alteration in stadium building for He and She toilets in Sports Complex in MDU, Rohtak. (2nd Phase)

Amount

Dismantling concrete cement concrete plain 1:2:4

Dismantling cement conglomerate/terrazo floors 25mm to 50mm thick without concrete base.

Dismantling brick work, tile masonry or tile lining and tile terracing. In cement

Scraping Cement plaster

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres abover plinth level.

11.43 cm. thick brick wall laid in cement sand mortar 1:4 in super structure.

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects.

12 mm thick cement plaster 1:6

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall inside

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smoothwith sand paper to fet an even and smooth finish including cost and carrigr of all material, labour charges, scaffolding, sundries etc. complete(J.K./Brila make)

Distempering with washable oil bound distemper (of approved manufacture) two coats excluding priming coat on new work.

Providing two coats of exterior acrylic emulsion paint (1st Quality) complete in all respect as approved by Engineer-in- charge Make:- Top quality of Asian/Nerolac

Cement concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth.

Conglomerate floor 25mm thick cement concrete topping 1:2:4.

Laying dry brick bats

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping, etc.

Painting two coats excluding priming coat with synthetic enamel paint in all shade on new wood work or metallicor plastered or concrete surface to give and even shade

Providing and fixing sliding nolt with nuts and screws, etc. complete iron size 250 mm X16 mm

Cutting holes upto 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to exising finish where required. 11.43 cm thickness of walls

22.86 cm thickness of walls

Providing and fixing PVC Bend ISI mark 100 mm dia PVC Bend

Providing and fixing in position best indian make lavatory suites(with full anti splash rim in vitreous chinaware and all other necessary fittings as fully described in item no. 30.41 above. Size 510mm X 400 mm with one no. tap.

Providing and fiixing 25mm thick Vetreous chinaware Partition plate for different type of urinals White

Pressed steel sheet frames (chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hings, confirming to PWD specifications, including bolts for fixing stops, locknutch, provision for receiving tower bolts and finished with one coat of ready mixed paint red lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete. (a) Door and window frame of size 89mmx50mm with 40mm wide single rebate

Cold twisted deformed (ribbed/tor steel) bars for RCC where not included in the complete rate of RCC including bending , binding and placing in position complete

Providing and fixing anti skid tile 400 x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note : - Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS

Providind and fixing 1st quailty ceramic glazed wall tiles confirming to I.S 15622 (thick ness to be specified by the manufactureer) of appreved make in all colors shades except burgundy, bottle green, black of any size as approved by Ebgineer-InCharge in skirting risers of steps and dados over 12 mm thick bad of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matchine shades complete. Size of ceramic Glazed tiles 200X300mm

Factory manufactured solid flush door shutters, with block board core as der I.S. No. 1659-1669 bonded with water, proof type danol formaloehyde synthetic resin, hot-press as , conforming to I.S. 2202 part-I and II fixed in position including iron hinges screws chocks/cleats and stops, etc. (Excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) Note:- Commercial veneering with vertical grains or cross bands and face vaneer on both sides comercial facing with laminated core and lipped edges. Duro, Green make 30 mm. Thick

35 mm thick

Cost of iron fittings, complete for doors and windows, such as tower bolts , handles, etc., and screws for these fittings (excluding sliding bolt) (a) for single leaf shutter

Cutting chase in brick walls in cement or in floor for embedding G.I. or H.C.i. pipe lines and making good the same to its original condition. size 75 mm x 50 mm

Providing and fixing in position 15 mm i/d C.P. brass bib cocks of best quality as required by the Engineer-in-Charge) Bib cock

Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-charge) 15 mm stop cock Stop cock male and female

Providing and fixing PVC pipe 110 mm dia of 4 Kg./ per sqm pressure Supreme/Kasta make complete in all respect up to the entire satisfaction of Engineer-in- charge.

Providing and fixing PVC plane Tee 110 mm dia of Supreme/Kasta make complete in all respect up to the entire satisfaction of Engineer-in-charge.

Providing and fixing door Tee 110 mm dia of Supreme/Kasta make complete in all respect up to the entire satisfaction of Engineer-in-charge.

Providng and fixing PVC P trap 110 mm dia ISI make complete in all respect up to the entire satisfaction of Engineer-in-charge.

Providing and fixing PVC pipe 75 mm dia of 4 Kg./ per sqm pressure Supreme/Kasta make complete in all respect up to the entire satisfaction of Engineer-in- charge.

Providing and fixing PVC plane bend 75 mm dia of Supreme/Kasta make complete in all respect up to the entire satisfaction of Engineer-in- charge.

Providing and fixing PVC plane Tee 75 mm dia of Supreme/Kasta make complete in all respect up to the entire satisfaction of Engineer-in- charge.

Providing and fixing door Tee 75 mm dia of Supreme/Kasta make complete in all respect up to the entire satisfaction of Engineer-in- charge.

Providing and fixing S trap 75 mm dia ISI make complete in all respect up to the entire satisfaction of Engineer-in- charge.

Providing and fixing 32 mm dia PVC waste pipe ISI complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing best Indian make water closet Hindware/Cera complete to the entire satisfaction of the Engineer-in-charge. 580 mm , White

Providing and fixing EWC Hindware/ Cera make complete to the entire satisfaction of the Engineer-in-charge. As per semple apprved.

Providing and fixing PVC Cistern Hindware/ Cera make complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing Cinaware flat back urinal 465 mm high Hindware/ Cera make including all material complete to the entire satisfaction of the Engineer-in-charge.

Providng and fixing 15 mm dia G.I pipe 'B' class Jindal/ Tata make including cost of specials & hook etc. complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing CP urinal spreader complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing C.P Jet complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing PVC connection ISI 600 mm long complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing C.P Jali 4'' ISI complete to the entire satisfaction of the Engineer-in-charge.

Providing and fiixing black granite stone on shelves over cement mortar 1:3 complete to the entire satisfaction of the Engineer-in-charge.