Interior fitout work in the office space of Numaligarh Refinary Limited, 9th floor, Tower B, World Trade Centre, Nauroji Nagar, New Delhi

S NO DESCRIPTION AMOUNT AMOUNT

2.00 SANITARY/ PLUMBING WORKS 1,32,689.95 13,36,609.00

3.00 ELECTRICAL WORKS 27,40,224.00 13,77,826.00

7.00 WI-FI & LAN WORKS (ACTIVE & PASSIVE) 0.00 22,31,291.36

10.00 FIRE ALARM & PA SYSTEM 3,70,631.00 14,45,281.00

13.00 ACESS CONTROL 0.00 2,76,764.00

Digitally signed by AMIT

Total (DSR +MR) 4,33,85,693.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

1 FLOORING WORKS

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

shuttering-all work upto plinth level.

1: 4: 8 (1 Cement: 4 coarse sand zone (III) derive from natural sources : 8 graded stone aggregate 40mm nominal size derived from

4.1.8 natural sources) 42.35 CUM 6812.00 288488.20

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its components of approved make

for different plenum height with possible height adjustment upto 50mm, comprising of modular loadbearing floor panels supported on G.I.

rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by

Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm

outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud

for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to

the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends

for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid

formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for

11.54 access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical

1.02 conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H

grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum

64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming

compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm

thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on

area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly

Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification

and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the

11.54.2 450mm Finished Floor Height (FFH). 11.13 sq m 5977.35 66527.91

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30

1.03 MR to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket. 108.69 metre 360.00 39128.40

ENGINEERED WOODEN FLOORING: Supplying and Installation of engineered wooden flooring of total thickness 13 mm -16 mm,

1.04 MR Toplayer PEFC controlled Core board PEFC controlled Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove 0.00 sq m 5765.00 0.00

Length Uniclic Width Uniclic Multifit Domestic use Conditions as per direction of engineer in charge.

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

11.41A mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

1.05 matching pigments etc., complete.

Size of Tile 600X1200 mm

3 Digitally signed by AMIT

CARPET TILES: Providing and laying Carpet tiles of Yarn type Nylon (Nylon 6) only; Multi-Level Pattern Loop, manufactured using 100%

solution dyeing process, Tiles of size 23cms x 91cms or equivalent as per direction of EIC and site requirement with SSP® Soil Protection

treatment TM or equivalent containing properties of Stain Repel, with Tile- 100% PVC Free/ 100% Bitumen Free/ 100% Recyclable -

backing system with recycled content, made from thermoplastic polyolefin compound with reinforcing layer high-performance environments

requiring modular flooring, having tufted yarn weight of 542.5 gsm/sqm and average yarn density of Minimum 9143 oz/cu. yd. or more,

1.06 MR Nominal total thickness 5.42 mm minimum, Radiant Panel class 1 rated (ASTM E648), NBS smoke < 450, Pill test -Passed, Anti Static 72.77 sq m 2562.00 186436.74

Property less Than 3.5 kv, Texture Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial Treatment-Passes (AATCC-174).

CRI Green Label Plus is certified for indoor air quality, including fixing/ installation with Low/ Zero VOC content Adhesive. Impact Sound

(ISO 10140-3) 20 dB & Sound absorption (ISO 354) 0.2 Class D.or equilent as per direction of EIC and site requirement

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2

1.07 11.4 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of 0.00 sq m 978.45 0.00

cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc.

ITALIAN MARBLE: Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required

pattern in linear portion of the building all complete as per architectural drawings, with 18mm thick stone slab laid over 20mm (average)

thick base of cement mortar 1: 4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with

1.08 11.51 white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 189.50 sq m 6603.35 1251334.83

LAMINATED WOODEN FLOORING Providing and laying 8.3 mm thick AC5 grade laminate wooden flooring having good castor chair

and furniture resistance strength. Plank dimension to be 1215*195*8.3mm with clock locking system and wax coating for better sound

resistance. Impact and abrasion resistance to be of high grade having class EN 13329. The flooring shall be laid with 2mm thick underlay

and PVC sheet and prevent against moisture and foot taping sound. The item also includes the skirting and any other profiles required for

proper installation.

TOTAL FLOORING WORKS 2465172.76 236360.14

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

2.01 12.45 channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of

rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

4 Digitally signed by AMIT

WAVE BAFFLE CEILING: To Supply & Install Custom made Vertical curve Blades Ceilings as per the design intent. The vertically curve

baffle system exhibiting space- delineating characteristics. The system comprises vertically curve baffle with 75-150mm deep curved

rafters manufactured out of 1.2mm Aluminium to provide wave effect. The module for fixing baffle shall be 150mm centres as per design

requirement. The carrier rails run perpendicular to the baffles axis and can be mounted with M6 threaded rods using technical approved

fasteners as per EN 13964 standards. The individual baffle lengths between 1200- 2400 mm can be selected. Baffles lengths less than

2.02 MR 1500mm required two carrier rails mounted at the baffle ends. Baffle longer than 1500mm require additional carrier rails mounted in the 30.00 sq m 8328.00 249840.00

centre. .No Pre Coated products shall be accepted. The spacing of the grid angles is according to the requirements of DIN 18168 and DIN

EN 13964 and quality controlled to ISO 9001:2015 approved by SIS & LEED certification by Indian Green Building council (IGBC).

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling/ wall formed out with TRANSLUCENT Printed fabric coverings

made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with

weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission

of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0.

The fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in

accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer

guidelines. It comes with 10- year manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation &

done at room temperature using PVC, Grippers. ceiling base to be made of MS or Wooden frame finishing to a flush finish of tapered and

square edges in desired design as per architect specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB

2.03 MR with recommended wattage as per manufacturer's standards to give an effect of ambient lighting. , LED spacing / Pitch should be atleast 18.00 sq m 7000.00 126000.00

73 -80mm with beam angle of 170 degree, Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-

10W/mtr. LED modules/ PCB should be positioned properly to provide an even light flow, casting noshadows or dark spots. LED Driver

LOOP CEILING: Providing & fixing LOOP® Type 2 system formed as an open metal ceiling with an open area of more than 50% and to

the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight into the plenum.

Bypassing the perforation, the S-shaped sides of the LOOP® interlock both the long and front side joint with a non magnetic suspension,

the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y direction. The non-magnetic

suspension system effectuates a self-alignment of the elements [puzzle effect]. The module size 966x1115x1.0mm GMS is perforated

with 60mm deep drawn holes .The substructure consists of a form perforated L profile [U1040] as a lateral grid which is suspended from

the ceiling with nonius adjustable upper and lower parts or with threaded rods using official approved dowel plugs. The grid profiles are to

be connected together at the ends by means of longitudinal connectors [U 1041] [screw fasteners]. The spacing of the grid profile is

according to the requirements of DIN EN 13964. On profiles angles, C-band raster as secondary profiles are bolted on by means of C

channel hanger bracket with M6 bolts. Only construction parts approved by the manufacturer may be used. Provide necessary supports,

provisions as per the architects /engineer in charge Instructions. Tolerances according to TAIM, DIN EN 13964 and quality controlled to

ISO 9001:2015 approved by SIS.Finish of ceiling is Silver grey powder coated with minimum 70-80 microns paint thickness. Manufacturer

shall have the fully automatic powder coating system with power and free conveyorize 3mtr/minute capacity. Powder coating plant shall be

equipped with latest modern technology with fully automatic inline Pre-treatment using nano technology, Inline automatic water Drying

system after pretreatment.

600x600 WOODEN CEILING: Providing and fixing woodwork 16 mm thick forming 600x600 mm tiles with Tegular edge (for wall/ ceiling).

Perforation in the panel will be of 6mm/8mm/10mm or as per Engineer in charge approval approval, the wooden ceiling panels to be

backed with black acoustic fleece with NRC of 0.4 (NRC 0.8 with 50mm GW of 48kg/m3). The grid should be of 24mm/15mm wide T -

section flanges color Black. The main T runner with length and size of 24X38mm/ 15X38mm made from .30mm thick sheet spaced at

1200mm Centre to Centre and cross T of size 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced between main T at 600mm

2.05 MR center to centre to form a grid of 1200X600mm and second cross T of length 600mm and size 24X25mm/15X25mm made of 0.30mm 28.80 Sqm 3203.00 92246.40

sheet to be interlocked at middle of the 1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X20 The Wooden

acoustic panel laminated in desired shade as per Engineer In charge approval.

5 Digitally signed by AMIT

LIVA CEILING: Providing & fixing Multidirectional paddle ceiling, comprising 150(H) & 100(W) fixed paddles manufactured from minimum

1.0mm thick aluminium, mounted on a non-interchangeable punched U-shaped carrier profile cross connected to U1040 multi slotted 2.0

GMS L angle as secondary profile installed at 1200mm Centers. The multidirectional non-perforated blade louvres shall be arranged at

precise right angles to each other at 100mm centers on a custom made pre slotted 1.0mm carrier rigidly. The distance between the

custom U-shaped carriers shall be 1200mm module according to EN 13964.Entire Ceiling substructure shall be suspended using M6

threaded rods using technical approved dowels. Substructure powder coated in Mat black shade & paddles shall be powder coated(Non

2.06 MR Metallic) . Multi Colour powder coating possible at an additional cost. Tolerances according to TAIM, DIN EN 13964 and quality controlled 20.00 Sqm 16431.00 328620.00

to ISO 9001:2015 approved by SIS,LEED certification by IGBC. Manufacturer shall have the fully automatic powder coating system with

power and free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with latest modern technology with fully

automatic inline Pre-treatment using nano technology, Inline automatic water Drying system after pretreatment.

PERFORATED ACOUSTIC CEILING: Providing and fixing suspended Demountable acoustic ceiling in recessed grid system

300x1200x12.5mm E with Unity 3, square 3.5mm holes, with 0.80 NRC* Material: High Grade Glassfiber Reinforced Perforated

plasterboard with Cleaneo TechnologyBoard type: Ceiling tile Lengthxwidthxthickness: 300x1200x12.5mmEdge: E recessed grid system

2.07 MR (8mm recess) Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint Colour: White NCS 0701 Y24R, closet match to RAL 27.36 sq m 3075.00 84132.00

9003; gloss 5 Attachment: Silhouette 15mm face exposed grid. 100 MM Centre to Centre

GYPSUM LOUVERED CEILING: 12.5x600x600 high grade, glass-fibre reinforced, acoustic, gypsum panel with acoustic perforation as

Unity 3 - square 3.5x3.5mm c/c 8.33 type U3. tiles with Strip shall be screw fixed on minimum 60mm wood or steel furring. The with strips

tiles are with edge B+ and are pre-painted ready for installation on site. screws, type Torx 15, with white-painted head are used for screw-

fixing. The acoustic tiles are furnished with a grey (white) absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN

53887).Colour - White, gloss 5 (standard) or re-paintable at site with water based acrylic paint.Closest match for repainting: Paint Type -

Waterbased acrylic emulsion paint including titanium for hygienic indoor climate. Light Reflection: 69.2% according to DIN Norm

2.08 MR 5036.Acoustic Property - αw: 0.95; NRC: 0.90.Fire Class - A2-s1,d0 .Suspension - must be screw fixed to furring of 22 mm wood or 60mm 30.00 sq m 17937.00 538110.00

steel battens at 300 mm c/c.

LINEAR OPEN CELL CEILING: Providing and fixing of linear cell ceiling made out of Aluminium. The assembled cell ceiling panels shall

be in size of 600x1200mm. The assembled cell ceiling panels shall made out of main blades in 9mm (W) x 40mm (H) in 1200mm (L),

installed at 66.66 mm c.c. and cross connected to secondary blades in 15mm(W) x 37mm (H) in 600mm (L) with 240 mm pitch. The

assembled cell ceiling panels are then clipped into U-94 carriers in GMS,coated in black enamelled finished at 1200mm c.c. Wire clips

shall hold the cell ceiling panels into the U-94 carriers. Once the U-94 carriers are installed then primary angles made out of GMS, type

U1040 are cross connected to the U-94 carriers at 1200mm c.c. for lateral bracing The whole ceiling shall be suspended by M6 threaded

2.09 MR rods installed at 1200mm c.c. The panels are fully downward demountable / hinged from the proprietary U 94 carrier section using C 94 180.00 sq m 4940.00 889200.00

spring panels.The system should be in accordance with Material class A2-s1, d0 according to EN 13501-01 “non-combustible”, as per the

Direction of Arch-in-charge. The system will meet fire retardant standards of BS 476: Part 6 & Part 7. Tolerances according to TAIM, DIN

EN 13964 and quality controlled to ISO 9001:2015 approved by SIS, LEED certification by IGBC.All panel modules must be hinge able

through wire clips. Finish of cell ceiling panels: Metallic silver colour.

TRIANGULAR CEILING: Providing and fixing system formed as an open metal ceiling with an open area of more than 50%. The

multidirectional ceiling composed of equilateral triangles 600mm modules with perfectly homogeneous aspect and the im-pression of a

uniform assembly. The main blades comprising 100mm height & 25 mm width interlocked in Extruded aluminium 1.50mm thickness

compensating tolerances in x and y direction. The substructure consists of a form punched perforated profile [U1040] as a lateral grid

which is suspended from the ceil-ing with nonius adjustable upper and lower parts or with threaded rods using official approved dowel

plugs. The grid profiles are to be connected together at the ends by means of longitudinal connect-ors [U 1041] [screw fasteners]. The

2.10 MR spacing of the grid profile is according to the requirements of DIN EN 13964. On profiles angles, C-band raster as secondary profiles are 27.36 sq m 12780.00 349660.80

bolted on by means of C channel hanger bracket with M6 bolts. Only construction parts ap-proved by the manufacturer may be used.

Provide necessary supports, provisions as per the engineer in charge approval. Toler-ances according to TAIM, DIN EN 13964 and quality

controlled to ISO 9001:2008 approved by TUV. Finish of ceiling is in wood Finish powder coated with mini-mum 60 microns paint

TOTAL FALSE CEILING WORKS 396300.34 3237157.20

6 Digitally signed by AMIT

3 WALL FINISHES WORKS

GLASS PARTITION (FIXED DOUBLE GLAZED GLASS PARTITION): Supply & Installation of Modular Double glazed partitioning frame

of 100mm System, (100mm x 25mm) as wall starter and top section, Using (100mm x 25mm) as wall starter and top section, Using

(100mm x25mm) as bottom channel. Glass to Glass butt joint with I, L & T profiles. 10mm + 10mm thk clear toughened glass. Required

accessories like Gasket and Adhesive tapes as per standard partition height upto 2500mm.

FRAMED HINGED GLASS DOOR: Supply and Installation of Modular Aluminium single leaf stile door frame of make 100 mm System,

using (100mm x 25mm) as door frame, using for Stile door Shutter 75x45mm with 5mm + 5mm thk clear thoughened Glass. All hardware

shall be included in the item.

WOODEN DOOR FRAMES: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and

9.1 fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

3.03 separately).

9.1.1 Second class teak wood 0.65 cu m 142949.70 93274.68

WOODEN BATTENS: Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling

8.27 necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 2.3 CUM 187277.65 430738.60

FLUSH DOOR SHUTTERS: Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core

9.21 of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross

3.05 bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 31.68 SQM 2392.65 75799.15

WOODEN LIPPING: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Providing and Fixing -900 mm or equivelent D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved

3.07 MR make and model all complete as per the direction of Engineer-in-charge. 12 Each 10793.00 129516.00

Providing and Fixing Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per the

3.08 MR direction of Engineer-in-charge. 12 Each 1007.00 12084.00

Providing and Fixing Double cylinder Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

950mm.Closing speed : 130°

3.09 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years 12 Each 9354.00 112248.00

Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.10 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal 15 EACH 228.85 3432.75

3.11 MR Providing and Fixing top and bottom strap of approved make and model all complete as per the direction of Engineer-in-charge. 15 Each 1007.00 15105.00

Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and Fixing SS Cylinder One side knob and one side regular key (3 key) for wooden doors of approved make and model all

complete as per the direction of Engineer-in-charge.

7 Digitally signed by AMIT

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum

tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on

3.14 MR Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) . 120.82 SQM 1583.00 191251.73

Providing and fixing Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 14.5 mm thick random

Grooved wooden acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design /

Engineer in charge/client approval, the wooden acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with

3.15 MR 50mm GW of 48kg/m3).the edge of panel shall be Tounge and groov to be fixed with clips on aluminium profile designed specially fo the 50.00 SQM 5253.00 262650.00

panel. the panel will be mounted with the help of clips on Bollard Aluminium extruded Keel. The grooved acoustic panel laminated in

desired shade as per Engineer In charge / clients approval.

LACQUERED GLASS: Providing and fixing of 6mm thick annealed (premium GRIHA rated lacquered glass ) of approved color by

Engineer in charge/ Client / Customer, fixed with ULTRAFIX (compatible neutral core silicon/ double sided tape) on a perfectly leveled

12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other structure. Lacquered

glass must be made industrially (via curtain coating process); opaque (if viewed against a support wall), coated with PU lacquer (50 micron

thick); color consistency (measured by Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum

3.16 MR 220 oscillatios); humid resistant (conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper, 134.60 SQM 5112.00 688058.84

noformaldehyde); appropriate recycled content (12% post industrial/ 6% post consumer); compressive strenght (1000 MPa) & tensile

strength (40 MPa), same as float glass;

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or

metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints

of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended

jointing compound, jointing tape, angle beads at corners (25mmx25mmx0.5mm), joint finisher and two coats of primer suitable for board

as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to

IS: 2095: part 3 (Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING: Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab &

celling, cladded with Acrylic Solid Surface 12mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with

industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural

requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design and dimensions

3.18 MR approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided, along with material 36.96 SQM 12952.00 478764.20

cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE

8 Digitally signed by AMIT

Providing & supplying of Window Blinds as per the approved sample double honeycomb shades having honeycomb within honeycomb

with easy rise operating system as per following specifications fabric specifications:

• Original Non-woven honeycomb shade shaving soft fabric appearance and high energy-efficient fabric with high tear strength constructed

out of Anti-static, resilent, colour fast & Sanitized Treat 100% spun bonded non-woven polyester fiber & precision manufacture to form a

hexagonally shaped duette pleat. The Fabric is GREENGUARD certified and can attain an NRC value of 0.75. Certificates to be provided

at the time of delivery of material at site. Pleat dimension ¾ ”Honeycomb within a Honeycomb” with 3 air pockets for maximum energy

• Shadings are duotone, with neutral tone facing the exterior and color facing the interior The Head rail. Shall measure 50 wide and 35mm

deep & thick 1.25mm extruded from alu. alloy& shall be powder coated to a smooth finish with a thickness of 40 microns. Fabric shall be

constructed from spun-bonded polyester fiber, precision manufactured to form a hexagonally shaped, dual pleat, cellular construction. All

cords & cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats operate

independent of each other providing superior pleat retention & structure strength. Installation brackets. shall be of high-tension spring steel

suitable for overhead & wall mounting 30mm Duette Hartford mounting bracket. Head rail covered with Sydney Valance of height 80mm

made up of Aluminium & L shape moving Rail includes “Click & Engage" method of dimension 50mmx55mmsticked with integrated

moving rail magnets provide a streamlined look, reduce centre light gap, and promote easier operation. Polyester cord. Shall be 0.9mm in

diameter & of woven hollow core end cap shall be moulded acrylic color matched to the head & bottom rails. Bottom rail shall be a single

channel section, measuring 30mm wide and 12.5mmdeep & thickness 1-1.2mm extruded from alu. Alloy & shall be powder coated with a

smooth finish to a thickness of 15-25 microns. Hold-Down bracket (optional) shall be molded in clear acrylic. It incorporates a pin for

engagement with the bottom rail end-cap. It shall be suitable for sill, face or side facing. Cord Equalizer shall be injection melded from

impact modified acrylic with a high flexural modulus

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per details of

Architect. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm laminate.

AAC WALL (150 MM): Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/ 300mm thick AAC blocks

in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer

modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be

made for seperately).

3.22 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 83.72 Sqm 104.80 8773.86

13.4 12 mm cement plaster of mix :

3.26 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 83.72 Sqm 262.70 21993.24

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

13.48A Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

12mm thick FSP HDHMR Board: Providing and fixing in wall lining, partitions etc. Confirming to ASTM E-84-2021 class1 one side 1mm

decorative Lamination, having even grade low emission, high moisture resistance, fire resistance, borer, termite & fungus resistance,

3.28 MR green material and environmental friendly with necessary fixing arrangement and screws etc. , complete as per direction of Engineer-in-

12mm thick FSP HDHMR Board 418.17 SQM 1043.00 436151.31

5.5mm THICK FSP HDHMR BOARD: Providing and fixing in wall lining, partitions etc. Confirming to ASTM E-84-2021 class1 one side

1mm decorative Lamination, having even grade low emission, high moisture resistance, fire resistance, borer, termite & fungus resistance,

green material and environmental friendly with necessary fixing arrangement and screws etc. , complete as per direction of Engineer-in-

3.29 MR Charge

5.5mm thick FSP HDHMR Board 295.57 SQM 648.00 191529.68

9 Digitally signed by AMIT

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm centre to centre

3.30 MR both ways (horizontal & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing 50mm thick 418.17 SQM 1347.00 563274.99

polyester synthetic insulation as insulation of 100 GSM.

3.31 MR WALLPAPER: Washable Vinyl Coated Wall covering as per approved make and pattern as approved by the client 226.12 SQM 1500.00 339180.00

TOTAL WALL FINISHING WORKS 1788264.77 8459748.24

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall

be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss

4.01 MR acrylic of approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs which will be covered with 10.04 SQM 10000.00 100400.00

PVC skirting in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws

of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for

measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together

as per site requirements etc.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall

be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss

4.02 MR acrylic of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area 2.75 SQM 8000.00 22000.00

of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies

from 400x560x710MM to 1000x560x710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels 5 Each 3548.00 17740.00

4.02B MR Providing and fixing baskets 5 Each 4013.00 20065.00

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal surface.

4.03 22.3 (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion 9.92 SQM 769.60 7634.43

including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with

bitumen @ 1.7 kg/sqm).

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and

for prepration of as built drawing any other details as and when desired by Engineer Incharge/ client. A qualified professsional for the

purpose shall be appointed after due appproval from Engineer InCharge.

SLIDING & FOLDING GLASS PARTITION: Providing and Fixing Glass Side Sliding Folding System including, Glass, Fittings,Top-Bottom

4.10 MR track,Seal and Lock of approved make and model all complete as per the direction of Engineer-in-charge. 18.28 sq m 32030.00 585380.28

10 Digitally signed by AMIT

Providing & fixing Access Panel of size mentioned below having - 1. Outer aluminium frame - thickness : 1.5mm (plus 0.2mm thick

powder coating). 2. Inner Aluminium frame - thickness: 1.5mm (plus 0.2mm thick powder coating). 3. Corner fittings, inner frame -

material: Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot

dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard Type: moisture resistant ( MR) in green

4.11 plasterboard liner. 6. Screw ( self - drilling black phosphate ) - Material: mild steel C1018 - 1022. 7. Sealing strip, width, thickness - width:

MR 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch lock ) - Type of lock: touch latch, Material of lock: plastic ABS, cold rolled

steel Q235. 9. Hinge - Thickness : 4.0mm, Length: 82mm; Material: SS2172 ( cold drawn steel wire ). 10. Powder coating - Color: white,

TOTAL MISCELLANEOUS WORKS 7634.43 1053272.28

11 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR TOTAL AMOUNT TOTAL AMOUNT

DSR TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2023/ MR DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) EACH 5 16080.00 80400.00

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630x460x130mm

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 5 2398.00 11990.00

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES &

MR 4 WALL FLANGE EACH 5 3284.00 16420.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 3 15087.00 45261.00

SET, SIZE: 375x520x400 MM

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

ADJUSTABLE WITH WALL FLANGE 15mm

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 3 2541.00 7623.00

Supply, HOOK ALD-CHR-573

Installation, Testing andor equivalent

Commisiong of PNEUMATIC SINGLE PIECE SLIM

MR 10 CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE EACH 3 8044.00 24132.00

CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

11 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

13 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 20 574.30 11486.00

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 5 416.80 2084.00

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

17 20mm nominal outer dia pipes 335.00 20100.00

18.7.3 25mm nominal outer dia pipes METRE 60 401.55 24093.00

18.7.4 32mm nominal outer dia pipes METRE 10 518.75 5187.50

18.7.5 40mm nominal outer dia pipes METRE 10 702.95 7029.50

18.7.6 50mm nominal outer dia pipes METRE 10 934.15 9341.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 30 497.80 14934.00

18.8.2 20mm nominal outer dia pipes METRE 20 537.60 10752.00

18.8.3 25mm nominal outer dia pipes METRE 10 627.25 6272.50

18.8.4 32mm nominal outer dia pipes METRE 10 739.30 7393.00

18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

19 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 1 798.95 798.95

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 80.00 536.00 42880.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 416.00 8320.00

Digitally signed by AMIT

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 22 complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 11 536.00 5896.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 11 726.00 7986.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover

MR 24 with screws and other required fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste water super quiet portable

pumping station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical

MR 25 shaft with inlet connection in portable pump side inlet of 50, 75, 110 as per requirement to EACH 5 67430.00 337150.00

complete the work as per the directions of engineer in charge

Providing and fixing stainless steel tray below sewage pipe of size 200x200x200 mm of grade

MR 26 SS304 including all accessories

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED

MR 27 DIVERTOR FOR BATH & SHOWER EACH 3 18938.00 56814.00

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND

MR 29 EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH EACH 3 24100.00 72300.00

CHROME PLATED) WITH RUBIT CLEANING SYSTEM

MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 5 12004.00 60020.00

MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 3 4392.00 13176.00

MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 5 4309.00 21545.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH LOWER

MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 5 2045.00 10225.00

MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 3 4978.00 14934.00

MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 3 3336.00 10008.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 4060 334.00 1356040.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 271 122.00 33062.00

1.24.5 6 pin 15/16 amp socket outlet Each 44 197.00 8668.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.5 1.26 excluding modular plate as required. Each 20 40.00 800.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

B.1 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

15 Digitally signed by AMIT

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 439.00 8780.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 90 1005.00 90450.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 120 1365.00 163800.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(b) 3.5 C x 95 Sqmm XLPE cable RM 10 864.00 8640.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 20 680.00 13600.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 20 510.00 10200.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 20 378.00 7560.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

C.3 MR conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 5 1446.00 7230.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 5 2253.00 11265.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable RM 5 2686.00 13430.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

16 Digitally signed by AMIT

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

D.4 required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 7 9081.00 63567.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 3 577.00 1731.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

E.3 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 1 12106.00 12106.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

E.4 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 2 6803.00 13606.00

headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)

E.6 MR modules for Floor Box Set 3 1533.00 4599.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 20 148.00 2960.00

1.24.6 Telephone socket outlet Set 40 148.00 5920.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 5 3603.00 18015.00

E.8 (b) 225mmx38mm(GI) - 3 compartment Mtr 10 2960.00 29600.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

MR adjustable junction box 65- 90 mm including all accessories ss plate of 3mm thick complete

in all respect as per the directions of engineer in charge

17 Digitally signed by AMIT

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.10 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 600 47.00 28200.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.11 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieling with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 20 1137.00 22740.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 2 13838.00 27676.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 125 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

18 Digitally signed by AMIT

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross

section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -6 Nos.

(b) 40 Amps, TPN, MCB - 4 nos

Panel complete as above Each 1 145000.00 145000.00

H SAFETY ITEMS

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

H.1 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour Nos. 4 269.00 1076.00

on front side as required

Supply, Installation, Testing and Commissiong of 10 KVA/10KW True Online Hot Swappable

Modular Type Double Conversion UPS having module capacity not more than 40% 3Phase

Input - 3Phase Output in Parallel Redundant N+1 Configuration IGBT Based Rectifier and

IGBT Based Inverter Batteries:12 V, SMF with minimum VAH capacity of 6240 suitable for 15

minutes backup with each ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC

Cable Upto 5 Meters complete in all respect as per the directions of the engineer in charge.

UPS should have availability of Input /Output isolator, Inbuilt manual bypass along with phase

sequence corrector. UPS Efficiency shall not be less than 92% from 25% to 100% Load

Total of Electrical items 2740224.00 1377826.00

19 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2022)/ MR AMOUNT

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator

made of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass

1.0 wool covered with tissue paper ,elliptical volume control damper , calibrated differential pressure

sensor (DPT sensors) at inlet complete with digital Thermostat.(All VAV shall be factory calibrated).

2.0 Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

a VFD uptoVAC,

or asChassis, RFIthe

directed by class A1 (C2),

engineer No brake chopper.

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted

3.0 MR price shall be inclusive of necessary conduting, copper control cabling from the sensors to the Nos. 4 17500.00 70000.00

respective VFDs as per "Approved Shop Drawings".

Supply, Installation, Testing & Commissioning of Silent type circular /rectangular inline fans for exhaust

air complete with sheet metal casing, 25mm thick acoustic insulation, direct driven centrifugal fan,

motor with proper protection and inspection door. Fan shall be suitable for operation on 220+6 %

volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both sides to facilitate duct

connections. Fan shall be installed as shown in the drawings and will be of following characteristics:

4.0 All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be

complete with Plug Top & necessary power cable.

Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for indoor installations.

a 200 CFM for Toilet and handwash Nos. 4 6449.00 25796.00

4.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity

with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the

MR impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete as

a required. This cost shall include the cost for suitable panel, DOL starter, breakers etc compete in all

respect as per the directions of engineer in charge.

6500 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 2 120000.00 240000.00

Digitally signed by AMIT

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return

air path as and where required of required sizes i/c control wiring,the damper shall be motorized and

spring return so as to close the damper in the event of power failure automatically and open the same

5.0 16.20 in case of power being restored. The spring return action shall be inbuilt mechanism and not externally

mounted. The damper shall also be closed in the event of fire signal complete as required and as per

specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

GI Gravity Louver

6.0 MR Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

7.0 VOLUME CONTROL DAMPER

Supply, Installation and Testing of GI box type volume control dampers as per the specifications and

a shop drawings. SQM 2 5900.00 11800.00

- For Rectangular Ducts

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/

round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

8.0 16.12.1 supports etc. as per approved drawings and specifications of following sheet thickness complete as

a 16.12.1.1 Thickness 0.63 mm sheet SQM 60 1080.00 64800.00

c 16.12.1.3 Thickness 1.00 mm sheet SQM 5 1381.00 6905.00

d 16.12.1.4 Thickness 1.25 mm sheet SQM 5 1836.00 9180.00

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

9.0 16.15 control dampers as per specifications. SQM 10 9105.00 91050.00

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

10.0 16.16 volume control dampers complete as required SQM 10 5910.00 59100.00

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without

12.0 16.18 volume control dampers with anti smudge ring & removable core. SQM 2 8121.00 16242.00

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

13.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 2 1440.00 2880.00

retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Digitally signed by AMIT

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings

and specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so

there are no visible joints. Slot diffusers shall be complete with end caps either as end plates or end

angles or integral part, air control blades etc. Slot diffuser have a variable neck length and the diffuser

14.0 MR face could be optionally be fitted to the plenum box on site. Diffuser shall have provision to access

collar dampers for air balancing.

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 2 12500.00 25000.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of

15.0 MR fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen SQM 1 5436.00 5436.00

to be got approved from Engineer in charge and Clients prior to procurement.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The

16.23 joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre

to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet

fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc.

complete as required and as per specifications

Supply, Installation, Testing and Commissioning of Air Purification systems in the specified areas

where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air

quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters. The Needlepoint

brushes shall be designed to properly release equal amount of positive and negative ions in the supply

air,>400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM,

with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will

18.0 indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have

weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and

backed with Independent lab test reports on the real virus and not surrogate. The system also should

reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be

UL 2998 listed with zero Ozone Emission.

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10,

CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device, you can

customize it to measure more parameters by adding extra sensors. This monitor should be a 3-tier

architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including

dashboard, android/IOS apps, where ever requires. Dashboard should be customisable and IOT

19.0 (Internet of things) enabled with view and management for all of your locations on one dashboard so

that you can easily identify and address any air quality issues. Sensors should be soft calibratable. The

System should be capable of providing periodic Preventive maintenance for automated after sales

support service in form of notification/ alerts and user interaction through dashboard application.

Digitally signed by AMIT

a Air Quality Monitor Nos 1 7580.00 7580.00

Supply, installation testing and commissioning of Router / Supervisory Controller which will manage

the VAV information and communicates on BACnet®/ LONWORKS® protocol to monitor and Control

the VAVs from BMS software on PC in accordance with the approved shop drawings and technical

specifications. Connecting the final daisy loop from all VAV to Supervisory Controller shall be part of

20.0 MR the scope. The communication between Supervisory controller and BMS software in PC should be on Nos 1 218928.00 218928.00

IP. Cost include powder coated Panel for Supervisory Controller of required size with 24 Volts

provision which includes power cable, plug, transformer and with all necessary accessories for

mounting on wall in accordance with the approved shop drawings and technical specifications.

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper

21.0 MR ferrules, lugs and other necessary accessories. The spec shall meet the system manufacturer Rmt 100 120.00 12000.00

specifications.

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper

22.0 MR ferrules, lugs and other necessary accessories. The spec shall meet the system manufacturer Rmt 100 280.00 28000.00

specifications.

Supply & Laying of ISI Certified 1" dia PVC Conduit with bends, collar, saddles, saddle base and other

accessories for Signal Cable / DDC Communication Cable

TOTAL HVAC WORKS 567155.0 1942994.0

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1.0 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 8 16415.00 131320.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

3 3.0 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down provision in case of fire

on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

5 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 245.00 9800.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 331.00 13240.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 466.00 18640.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 588.00 23520.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 707.00 14140.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 865.00 17300.00

Digitally signed by AMIT

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 10 1022.00 10220.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 10 1108.00 11080.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

8 MR fittings such as bends tees etc. and duly insulated.

40 mm dia (9 mm thick ins) Rm 80 374.00 29920.00

Total HVAC WORKS 401062.00 86782.35

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate

Pendant luminaire Triax with LED (Light Emitting Diode), system power

32W, luminous flux of luminaire 2880 lm, color temperature of 4000K,

neutral white, direct light emission, 230V, constant current driver, aluminum

support profile, polyester powder coated grey applied over a 5 stage pre-

treatment, prismatic diffuser, Electronic Control Gear,

Protection Class I, IP 20,

L1= 600 mm, L2= 600 mm, L3= 600 mm, H= 67mm, max. PL= 1500 mm

Pendant luminaire Edifice with LED(Light Emitting Diode) system power: 15

W, the luminous flux of luminaire 750 lm, the colour temperature of 4000K,

neutral white, CRI>90, SDCM 3, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours; energy-efficient LEDs, direct

light emission, luminaire profile in anodized aluminium, Opal Diffuser,

2 MR External Electronic control gear, Each 30 2400.00 72000.00

Protection class I, IP20,

Recessed downlight Blair with HPE (High-Performance Efficiency) with LED

(Light Emitting Diode), system power: 15 W, Luminous flux of luminaire

1500 lm, 100 lm/w, Colour temperature of 4000 K, Neutral white, CRI > 90,

THD<5%, SDCM 3, 230V constant current driver, 70% of luminous flux after

50,000 operating hours; energy-efficient LEDs, direct light emission,

housing in die-cast aluminium, Polyester powder white coloured coat

applied over a 5-stage pre-treatment trim, prismatic diffuser for

homogenous light distribution, UGR<19, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear,

Protection class II, IP 40,

26 Digitally signed by AMIT

Pendent luminaire Slash S with HPE (High Performance Efficiency) LED

(Light Emitting Diode), system power: 28W, Luminous flux of luminaire 3080

lm, 110 LM/W system efficacy, colour temperature of 4000 K, neutral white,

CRI > 90, THD<5%, SDCM 3, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, Energy efficient LEDs, Direct

light emission, Luminaire profile in aluminium, Polyester powder aluminium

white coloured coat applied over a 5- stage pre-treatment, opal prismatic

diffuser for a homogenous light distribution ZHLS(ZERO HALOGEN LOW

SMOKE) internal wiring, integral electronic control gear,

Protection class I, IP 40,

Recessed with trim luminaire Finn Pinspot light with LED(Light Emitting

Diode) system power: 8W, luminous flux of luminaire 720lm, colour

temperature of 4000K, neutral white, CRI>80, 230V constant current driver,

70% of luminous flux after 50,000 operating hours, direct light emission,

aluminium housing with trim, polyester Black powder coat applied over a 5

stage pre-treatment on trim, with lens and a beam angle of 36° and external

5 MR Electronic control gear Each 32 1350.00 43200.00

Protection class II, IP20

27 Digitally signed by AMIT

LED recess luminaire with LED(Light Emitting Diode) system power: 30W,

110 LM/W system efficacy, colour temperature of 4000K, neutral white,

230V constant current driver, 70% of luminous flux after 50,000 operating

hours, energy efficient LEDs, CRI>90, luminous flux of 3300 lm, MacAdam

3, T.H.D≤5%, driver efficiency ≥ 88%, surge protection of 2.5kV, direct light

emission, Aluminium body, polyester white powder coat applied over a 5-

stage pre-treatment, Prismatic diffuser for glare-free uniform light, UGR<19,

6 MR Electronic control gear Each 17 3300.00 56100.00

Protection class I, IP40,

LED recessed luminaire system power 30W, 110 LM/W system efficacy,

colour temperature of 4000K, neutral white, 230V constant current driver,

70% of luminous flux after 50,000 operating hours, energy efficient LEDs,

CRI>90, luminous flux of 3300 lm, MacAdam 3, T.H.D≤5%, driver efficiency

≥ 88%, surge protection of 2.5kV, direct light emission, Aluminium body,

polyester white powder coat applied over a 5-stage pre-treatment,

7 MR Prismatic diffuser for glare-free uniform light, UGR<19, Electronic control Each 32 3200.00 102400.00

Protection class I, IP40,

Supply, Installation, Testing and Commisioning of Recessed downlight with

LED (Light Emitting Diode) system power: 5W, Luminous flux of luminaire

400 lm, Colour temperature of 4000 K, Warm white, CRI > 80, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours;

energy-efficient LED, direct light emission, housing in die-cast aluminium,

Polyester powder white coloured coat applied over a 5-stage pre-treatment

ceiling trim, with reflector, beam angle of 24°, Electronic control gear,

Protection class II, IP 20,

TOTAL 895150.00

28 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

SITC of UL268 6th and 7th edition compliance and FM approved Intelligent Addressable multi-

criteria detector (optical and thermal sensors) complete with standard base, facility to mount in

different comprehensive environment, Tri-color detector-status LED with 360 ° view,

microprocessor circuitry with error check; detector self-diagnostics and supervision

programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F (57°C) , Field

programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI

1 MR immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit No 43 3175.00 136525.00

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in

detector shall consider Isolator base in place of standard base OR separate Isolator before

and after every detector to comply the same without any extra cost. It shall be

includesurface/recessed MS Box complete with all connections etc as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

2 17.2.5 Box having two LED, metallic cover complete with all connections etc as required. No 43 276.00 11868.00

SITC of UL Listed and FM approved Intelligent Addressable Rate of Rise and Fixed

temperature detector complete with standard base, Seven (7) field-selectable settings in a

temperature range of 135°F – 174°F (57.2°C – 78.9°C) , a low-temperature warning of 40°F

(4.4°C), facility to mount in different comprehensive environment, Tri-color detector-status LED

with 360 ° view, microprocessor circuitry with error check; detector self-diagnostics and

supervision programs, Field programmable as rate-of-rise or fixed temperature, Polarity

insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built

isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not

having in-built Isolator feature in detector shall consider Isolator base in place of standard

base OR separate Isolator before and after every detector to comply the same without any

Supplying, installation, testing & commissioning of fault isolator complete with base as

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and

5 MR 75cd flashintg at 1 Hz for visual indication. No 2 3313.00 6626.00

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Control

Module with built in dual isolator, polarity insensitive, Tri color LED for status (Green for

Normal,Yellow for Faulty and RED for activation), Operating Temp and RH: 0-49degC and

<=95%. Module shall have in-built isolator for better reliability, circuit integrity and advanced

fault finding. Manufacturers not having in-built Isolator feature shall provide separate Isolator

before and after every Module to comply the same without any extra cost. (For AHU &

Staircase Pressurization Fans, Hooters / Sounders / Strobes etc.)

Supplying, installation, testing & commissioning of addressable phone control module

complete as required.

Digitally signed by AMIT

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Monitor

Module with built in dual isolator, polarity insensitive, Tri color LED for status (Green for

Normal,Yellow for Faulty and RED for activation), Operating Temp and RH: 0-49degC and

<=95%. Module shall have in-built isolator for better reliability, circuit integrity and advanced

8 MR fault finding. Manufacturers not having in-built Isolator feature shall provide separate Isolator No 1 2950.00 2950.00

before and after every Module to comply the same without any extra cost. (For Flow Switch

Monitoring/ Gass suppresion Integration etc.)

SITC of UL268 6th and 7th edition compliance and FM approved Intelligent Addressable Duct

detector with 10ft sampling pipe (optical and thermal sensors) complete with standard base,

facility to mount in different comprehensive environment, Tri-color detector-status LED with

360 ° view, microprocessor circuitry with error check; detector self-diagnostics and supervision

programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F (57°C) , Field

9 MR programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI No 1 9192.00 9192.00

immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in

detector shall consider Isolator base in place of standard base OR separate Isolator before

and after every detector to comply the same without any extra cost.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Manual Pull

Station Single Action, Shock and Vibration Resistant, with built in dual isolator, polarity

insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and RED for

activation), T-45 Key Reset lockset for easy maintenance, Operating Temp and RH: 0-49degC

and <=95%. MCP shall have in-built isolator for better reliability, circuit integrity and advanced

fault finding. Manufacturers not having in-built Isolator feature shall provide separate Isolator

before and after every MCP to comply the same without any extra cost.

Supplying, installation, testing & commissioning of 8 zone, voice alarm controller with USB,

MP3 player (including 8 zone button paging station) with seamless integration facility with main

12 MR fire alarm panel for voice evacuation. 3. The controller shall comply standards of BS EN54-32 No 1 229838.00 229838.00

& EN608409, Controller shall have AC 230V and DC24V battery input. Auto switch into the

battery backup when AC fails.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

operating at 240 Volt AC Supply complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm FS armoured cable, 600/1000V rated with

15 MR annealed copper conductor having XLPE insulation, steel wire armouring & FS outer sheath Mtr. 430 235.00 101050.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

existing surface/ recessed steel conduit of following pairs, cores and size including

16 MR connections and interconnections etc. as required.

Supplying and Laying of 2x1.5sqmm FS unarmourd cable Mtr 340 158.00 53720.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

Digitally signed by AMIT

Supplying, Installing, Testing & Commissioning of LED technology, High efficiency,

Emergency light s with Function Use as an emergency luminaire Testing system Stand

Alone, Housing Polycarbonate, Glow wire test : 850°C, RAL9003, Type of mounting Surface:

Recessed base for ceiling, double sided cone diffuser, plexi plate diffuser, Degree of protection

IP65, Operation Mode Non Maintained or Maintained & Non Maintained mode selectable,

19 MR Connection voltage 230V -/+ 5% [220V-240V] 50-60Hz, Permissible ambient: temperature NOS 1 7637.00 7637.00

+5°C to +40°C, Battery: Ni-Cd, Duration 3 hours, Viewing distance 20m or 30m, Insulation

class II, 20 mtrs. viewing distance, Dimensions in mm: 270x119x49; for 30m viewing distance

version: 371x170x62

SITC of Remote Paging Microphone should be fully digital connected via CAT6 Cable with

Controller. The Microphone should have capability to make announcement in 96 Zones and

have all call facility. The Microphone shall have ability to control music and should be able to

route the music in zones. Microphone should have maximum zones capacity up to 120 Zones.

20 MR The Microphone should have LED indication for the different faults, the unit shall be able to NOS 1 158571.00 158571.00

indicate AC, DC, Fault, Mic and Test status through LED.. The Unit shall have 2 RJ45 ports for

Microphone so that the other microphone shall be able to link with the unit. The Microphone

shall have ability to Communication limit up to 600 Meters

Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For

21 MR BMS Fire integration compatible with existing system Nos 1 92150.00 92150.00

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 160 character liquid

crystal with backlit control compatible with existing system

SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable 2 Loop Fire

Alarm control panel. Panel shall be running on full digital protocol with 32 bit Microprocessor .

The Panel shall be complete with 6" color touch screen LCD Display. Fire alarm panel should

have minimum capacity of 2500 detectors and devices in any combination and capable of

making upto 50 loops in single panel using additional Loop cards. Each addressable loop

shall be capable of taking 250 addresses per loop configuring either as all detectors or

modules or any mix of both. The panel shall have the Fire Fighter Touch Screen Graphical

Display panel to inform & guide Fire Fighters for carrying out Fire Fighting operations. The

display shall have Hazmat icons indicating the presence of any explosive gas, liquids,

poison,fumes etc. If this feature is not available in fire alarm panel then additional fire fighter

24 MR touch panel along with necessary hardware and software should be provided by the Nos 1 466667.00 466667.00

manufacturers for fire fighters to guide them during emergency without any extra cost. To

expedite system troubleshooting, the system cards shall have ground fault detection and

diagnostic LEDs by card. In the display,simple building floor plan can be loaded in bitmap or

jpeg format, On the map, the user will see an icon indicating the location of the event in the

building in addition to a 'You-Are-Here' symbol to tell the responding person exactly where they

are in the building in relation to the event. The system shall be polarity insensitive. The panel

shall support degrade mode operation and shall have battery backup of 24 hrs in normal

condition and 30 minutes in Alarm condition.

TOTAL FIRE ALARM WORKS 370631.00 1445281.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

18.21.1 Pendant type 109 Each 522.00 56898.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets, center bracket, stockbar

of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

Digitally signed by AMIT

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 2 NOS 12912.00 25824.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: IT

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No Description UNIT QUANTITY RATE

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6A UTP cable 23 AWG solid copper conductors for Connectivity of Hub

room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable termination at Work Station

2 end. Keystone Unshielded Outlet, 180DG C6 Blue Nos. 95 340.00 32,300.00

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7 feet) for information outlet

3 (I/O) to end user device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 95 350.00 33,250.00

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3 feet) for information outlet

4 (I/O) to Rack End Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, Nos. 95 279.00 26,505.00

Supply, Installation, Testing and Comissioning of 24 port Loaded Jack Panel for CAT6A cable

termination at rack end. Data Active

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub

6 room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Mtr 1200 38.00 45,600.00

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination at Work Station

end. Keystone Unshielded Outlet, 180DG C6

Supply, Installation, Testing and Comissioning of 24 port Loaded Staggred Jack Panel for CAT6 cable

termination at rack end. Voice Active

Supply, Installation, Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for information outlet

9 (I/O) to end user device connectivity. (Rack end), High Speed Gigabit 26AWG Patch Cord, LSZH, C6 Nos. 40 235.00 9,400.00

Supply, Installation, Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet

10 (I/O) to end user device connectivity. High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 40 275.00 11,000.00

Supply, Installation, Testing and Comissioning of 2 Port British Style Shuttered Face Plate white for

I/O fixing at user side

Supply, Installation, Testing and Commissioning of 50 pair MDF box complete with Krone Modules

13 Supply, Installation, Testing and Comissioning of 50 pair riser cable Nos. 1 600.00 600.00

Supply, Installation, Testing and Commissioning of 6 core OM3 Multimode fibre

C. Backbone Component

Supply, Installation, Testing and Comissioning of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to

Supply, Installation, Testing and Comissioning off Rack mount fibre tray supporting 6 way configuration

16 in LC Duplex. Panel should be loaded with 6 port LC duplex adaptor panel Nos. 1 2,500.00 2,500.00

34 Digitally signed by AMIT

SITC of 42U Server Rack with perforation and wheels at base, Glass Door, Cable managemenet,

17 6/16A power strips- 2 nos, 4 fan for cooling, Rack should have shelves Nos. 1 54,450.36 54,450.36

D. Network Rack and Other Accessories

SITC and integration of Versa SDWAN Gateway of 100 Mbps capacity with NRL's existing SDWAN

from M/s Versa Networks. Aggregate Throughput (Performance License) 100Mbps. SDWAN device

model No.(Dell VEP1425-V210 or equivalent) along with 5 Years support directly from OEM including

18 on-site replacement and reverse pick-up Set 1 3,50,000.00 3,50,000.00

SITC of Core Switch with 5 years support directly from OEM including on-site replacement and reverse

pick-up. (Model Allied Telesis AT-x950-28XSQ)

SITC of 24 port POE Access Switch with 5 years support directly from OEM including on-site

replacement and reverse pick-up. (Model Allied Telesis AT-x230-28GP)

SITC of Inbuilt controller managed Indoor Wi-Fi 6 (802.11ax) Access Point with 5 years support directly

from OEM including on-site replacement and reverse pick-up. (Model: Allied Telesis TQ6602)

SITC of 10 Gig SR transceivers/equivalent LC connector MM SFP with 5 years support directly from

OEM including on-site replacement and reverse pick-up.(Make: Allied Telesis)

23 SITC of MM OM3 Fibre Patch Cords Nos. 1 6,406.00 6,406.00

35 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: CCTV

S No Item Description UoM Qty Rate DSR Amount NDSR Amount

SITC of 2MP, 1/2.8” CMOS image sensor, low illuminance, high image definition, Outputs 2MP

(1920 × 1080) @ 25/30 fps Built-in IR LED, max IR distance: 30 m, Intelligent detection: Intrusion,

1 tripwire,Abnormality detection: Motion detection, video tampering, no SD card, Supports max. 256 No's 4 10,730.00 42,920.00

GB Micro SD card, IP67, IK10 protection etc all complete.

SITC of 8 channel Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format. · Max.

decoding capability: 32 × 1080p@30 fps or 32 × 2MP@30 fps. · Max. 384 Mbps

incoming/recording/outgoing bandwidth. · Support AcuPick with Max. 16-Channel. · Support N+M

2 cluster. · AI by recorder: 2-channel face detection and recognition, 4-channel perimeter protection, No's 1 11,845.00 11,845.00

and 8-channel SMD Plus. · AI by camera: Face detection and recognition, perimeter protection,

SMD Plus, metadata, ANPR, stereo analysis, heat map, and people counting etc all complete.

SITC of Hard Disk 16TB required for the above NVR etc all complete.

CAT6 Patch Chord in existing Network Rack

CAT6 IO / Connector at camera location

Supply, Installation, Testing & Commissioning of 32" Flat Screen HD led (24X7) with Interfaces

include HDMI, DVI, D-sub, Component and Composite input as well as RS-232C and RJ45 for

6 extensive connectivity, remote control and wall mount unit / floor stand complete with making Nos 0 30,000.00 -

connections etc complete as reqd.

IP CCTV and Suvilliance Solution 1,89,020.00

36 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: IPPBX

S No Item Description UoM Qty Rate DSR Amount NDSR Amount

IP-EPABX with 100 SIP Extensions / 30 SIP TRUNKS, expandable upto 200 SIP

licenses in future, Multi-level Auto attendant with IVR functionality, Voice mail to

1 email forwarding, Multi-party audio conference, Voice logger for conversation Nos 1 1,75,000.00 1,75,000.00

recording, Multiple locations connectivity, And other standard features of IPPBX

SITC of Analog Phones: FSK/DTMF compatible caller ID

16 digit single LCD display

Material: Plastic

Size: 20 x 10 x 8 cm

30 incoming memory and 5 outgoing memory

Real time clock with year,date and month display

SITC of High-resolution 2.7” graphical TFT display 32 self-labelling function keys (8

physical keys) for Speed dialing,12 SIP identities / accounts, Dual switched, gigabit

ethernet ports, PoE (Power on Ethernet), And other standard features

37 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: ACCESS CONTROL

S No Item Description UoM Qty Rate DSR Amount NDSR Amount

SITC of Integrated Visitor Managment System Desk license at

1 Reception desk at each floor etc all complete Nos 1 81,567.00 81,567.00

SITC of Biometric Machine: User identification in 1 second Minimum

500 Users and Expandanbe up to 10,000 users (30,000 templates)

in 1:N identification mode, 2.8” QVGA color touchscreen and buzzer

250,000 IDs in authorized user list, 1 Million logs. CPU: ARM Cortex-

A9 core 1GHz, Linux Operating System, Fake finger detection,

Duress finger, FBI PIV IQS certified optical fingerprint senso,

Network / Communication: - Ethernet, RS485, USB, Wiegand and

2 OSDP support ,Integrated Smart Card Reader, Internal storage Nos 1 95,137.00 95,137.00

capacity: 512MB Flash, 512MB RAM, Operating conditions: -

Temperature: -20°C to 55°C (-4°F to 131°F) - Humidity: 10% to 80%

(non condensing), Ingress protection: IP65, EMC/Safety standards: -

CE, CB, FCC, BIS - UL294 , RoHS, REACh and WEEE etc all

SITC of Smart card Frequency Excitation (13.56 MHz) Mifare smart

Card , distance upto 2.5" Memory Type EEPROM, 2K bit memory

3 Complies with ISO/IEC standards for thickness. Lifetime Warranty Nos 25 410.00 10,250.00

etc all complete

SITC of SS Based Exit Push Button Stainless Steel etc. as per

4 specifications etc all complete Nos 2 1,180.00 2,360.00

SITC of Emergency Glass Break Unit Single Pole as per

5 specifications etc all complete Nos 2 1,770.00 3,540.00

SITC of Electro Magnetic Lock Double Leaf/ Single Leaf as per door

design, Fail safe type, Holding force: 272kg(600lbs), Inbuilt Door

contact , Current Drain:320mA/12VDC, Built-in voltage spiker

6 suppressor to protect the lock body and equipments, lock body and Nos 2 14,455.00 28,910.00

armature with chemical plating anticorrosion finished, With LED light

& brackets UL Listed etc all complete

SITC of 4 core 1.5 Sqmm shielded communication multi-stand Data

7 Cable (as per actual) etc all complete Metre 200 210.00 42,000.00

SITC of 3 core 1.5 Shielded communication multi-stand Data Cable

(as per actual) etc all complete

38 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S No Item Description UoM Qty Rate DSR Amount NDSR Amount

SITC of 85" Professional Ultra HD Interactive Display Panel, 4 drawing (1024 level

touch recognition), Touch Pen Type: Passive Pen with magnet, Object Recognition

Range: 2mm/ 4mm / 8mm / 50mm , 1024 Level on Brush Mode, Touch Response

Time: 6.7ms or Better, 4K UHD (3840x2160) Resolution, Brightness 500 Nits,

Viewing angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion,

1 Contrast ratio (typical) 4000:1, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, No's 0 761338.00 0.00

DVI-I, Audio In, Audio Out, Control: RS232, OS: Tizen,Processor CA72

Quad(1.7GHz) 2MB L2, Ethernet, 2x10W Built-in speakers, UL, FCC, CE, ROHS,

BIS Certified etc all complete

SITC of 75" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution,

Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing angle (horizontal /

vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel technology: IPS /

Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video Input: 2 HDMI 2.0, 2

2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232, Ethernet, 2x10W Built-in

speakers, CE, FCC, Class A, BIS Certified etc all complete

SITC of 65" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution,

Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing angle (horizontal /

vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel technology: IPS /

Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video Input: 2 HDMI 2.0, 2

3 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232, Ethernet, 2x10W Built-in

speakers, CE, FCC, Class A, BIS Certified etc all complete

SITC of 55" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution,

Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing angle (horizontal /

vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel technology: IPS /

Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video Input: 2 HDMI 2.0, 2

4 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232, Ethernet, 2x10W Built-in

speakers, CE, FCC, Class A, BIS Certified etc all complete

SITC of Fixed Wall Mount, capable of holding up to 75 kg and supports 37" to 100"

5 displays, VESA Compliant etc all complete No's 0 20271.00 0.00

39 Digitally signed by AMIT

SITC of Wireless Presentation Platform, allows simultaneous content sharing for

up to four 1080p presenters, Wireless screen casting with iOS, Android, Mac,

Chromebook, and Windows devices through native AirPlay, Google Cast, or

6 Miracast protocols, Supports YouTube Live streaming, Local storage available for No's 1 253738.00 253738.00

playback of images and video, WPA2-PSK, and AES-128 encryption etc all

SITC of Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-format

7 cables, 2 Universal Power Socket , 1 HDMI, 1 USB-C for Data Transfer, made of No's 3 26250.00 78750.00

aluminium etc all complete etc all complete

SITC of All-In-One Video Bar (with Integrated Microphones, Speakers, 4K Codec,

4K Camera with Privacy Cover/Shutter), Remote Control /Touch Control Panel

8 from the same OEM, should support H.323 & SIP standards for No's 0 610879.00 0.00

communications,support interoperability and bandwidth saving using video

compression H.264 AVC, H.264 High Profile, H.265, should support 4K 30

SITC of HD60 Visual

fps,1080p 30 fps ,720p 60System,

Communications fps ,720p 30 point

along with soft VC connectivity 4k Codec-Wireless Presentation System, auto track

9 cam with wall mount, IP Mic, touch pannel, NTSC/PAL; Cables: 1 HDMI 1.8m, 1 No's 0 1346327.00 0.00

CAT 5E LAN 3.6m, 1 CAT 5E SHLD 25ft, Power: India BIS. Maintenance etc all

SITC of 8x4 multiport matrix switcher with advanced control functions. 4x HDMI,

4x TPS input ports and 4x HDMI output. Audio DSP and Microphone input.

HDMI1.4 + audio + RS-232 + IR extension up to 100m distance. All 3D formats, 4K

/ UHD (30Hz RGB 4:4:4 , 60Hz YCbCr 4:2:0) are supported. IR control port.

Audio embedding and de-embedding. Built-in Event Manager, command injection,

10 Autoselect & priority modes, EDID Management. Compatible with TPS series No's 1 760732.00 760732.00

products. Infra and CEC command sending/receiving with Event Manager;

advanced RS-232 control. etc all complete

SITC of HDMI1.4 + Ethernet + RS-232 + bidirectional IR HDBaseT receiver over

CATx cable. HDCP, 3D and 4K / UHD ( 30Hz RGB 4:4:4 , 60Hz YCbCr 4:2:0)

SITC of HDMI1.4 + Ethernet + RS-232 + HDBaseT transmitter over CATx cable.

HDCP, 3D and 4K / UHD ( 30Hz RGB 4:4:4 , 60Hz YCbCr 4:2:0) compliant.

40 Digitally signed by AMIT

SITC of controller Should Support 127 or better conference units; maximum 4000

units with extensions. Should have TCP/IP network interface, along with Voting,

speech and data management functions. Controller Should have Built-in high

performance DSP technology. Automatic Camera Tracking System to track the

speaker. Should have the 4.3" high-definition color touch screen. Should have

Conference check-in and recording. Should have Automatic unit inspection. Should

have Speech timing and countdown function. Support video tracking, with 6 HDMI

in and 1 HDMI out, 6 BNC in and 1 BNC out Should have RCA interfaces: 2 AUX

input, 2 AUX output, 2 Alarm input with override function. Should be controllable

through Android PAD remote Control. Should support FIFO, NORMAL, VOICE,

FREE, APPLY five conference modes. LINE input voltage : 250 (±30) mV, LINE

output voltage : 1 (±0.1) V, BALANCE output voltage : 1 (±0.1) V, Frequency

response: 41Hz-19.5kHz（-3dB, SNR: >79 dB) ,Harmonic distortion: <0.2-0.3%,

Output power: ≤110W/3-way, 24V Max. power: 350W, Power consumption: 15W,

Control interface ; RJ45, RS232, RS422, Power source; Switch Mode Power

Supply 220V-240V/50Hz/350W

SITC of Table Top Chairman Unit, Design for Desktop , detachable Mic &

Convenient to use. Cardoid Condenser Microphone Gooseneck Type with Cover

Two colors indicators, red for speaking, green for apply to speak, Built-in Hi-

speaker, will be muted automatically when the Mic is turned on to avoid unwanted

14 3.5mm stereo earphone jack, volume adjustable Every Mic Should be with unique 1 No's 41,190.00 41,190.00

ID code, can be set up via, Controller With camera tracking function, can be set up

via Controller or through Software Power supply from the Controller/extender Unit,

working power DC 24V. Should Support cascaded linkage, T shape linkage or +

shape linkage. Output frequency response: 46Hz-17.5kHz（-3dB, SNR : >80dB

Harmonic distortion : <0.5%, Mic Frequency response: 41Hz-20kHz（-3dB), Max

Sound Pressure Level: 124dB (THD<3%), Connection: 8 Pin DIN

41 Digitally signed by AMIT

SITC of Table Top Delegate Unit , Design for Desktop , detachable Mic &

Convenient to use, Cardoid Condenser Microphone Gooseneck Type with Cover

Two colors indicators, red for speaking, green for apply to speak, Built-in Hi-

speaker, will be muted automatically when the Mic is turned on to avoid unwanted

3.5mm stereo earphone jack, volume adjustable Every Mic Should be with unique

ID code, can be set up via Controller, With camera tracking function, can be set up

via Controller or through Software

Power supply from the Controller/extender Unit, working power DC 24V, Should

Support cascaded linkage, T shape linkage or + shape linkage, Output frequency

response: 46Hz-17.5kHz（-3dB, SNR : >80dB

Harmonic distortion : <0.5%, Mic Frequency response: 40Hz-19.5kHz（-3dB, Max

Sound Pressure Level: 124dB (THD<3%), Connection: 8 Pin DIN

SITC of 20 Meter Conference system extend cable between terminals, 8-pin high-

density cable with one Side Male Connector & one Female Connector

SITC of 4 channels output, total power output 350W Microphone Extend Power

with 8-pin DIN cable Both ends are male interfaces , Conference Controller and

extenders, conference Controller and microphones, conference Controller and

power extender Length is 2m

SITC 2 Meter Conference system extend cable between terminals, 8-pin high-

18 density cable with both Side Male Connectors to Connect Controller with Extended 12 No's 2,320.00 27,840.00

SITC Conference socket is Technitia's T-DCU series Digital conference system

19 dedicated microphone ground hidden interface box, with two standard 8-core DCN 1 No's 13,580.00 13,580.00

male socket and 1 AC220V three-hole universal power supply socket,

SITC of Audio, Video and Control (AV&C) Processor, 64 x 64 networked audio

channels, 8x on-board Flex channels and GPIO, Full-featured Control engine (with

feature license), 8 AEC Processors, up to 32 x 32 Dante audio channels (8 x 8

20 included), USB AV bridging (8 x 8 audio + Camera support), Full-featured Q-SYS 1 No's 4,67,400.00 4,67,400.00

Control engine (with optional feature license), External USB audio device host, Up

to 2x VoIP instances etc all complete

42 Digitally signed by AMIT

SITC of 6.5-inch, 2-Way Ceiling Speaker, Rated Power: 60W, Frequency Range:

65 Hz – 20 kHz, Sensitivity: 88 dB, Rated Coverage 135° conical DMT, Maximum

21 continuous SPL 106 dB, Nominal impedance: 8 / 16 Ohm, Transformer taps: 60W / No's 4 27645.00 110580.00

30W / 15W at 100 / 70V, IP-34 Rated, Low-saturation and low-loss 70/100V

transformers with 16Ω bypass, UL and CE Certified etc all complete

SITC of 4 Channel Class-D Amplifier, Power (per channels driven): 200 W at 8 Ω /

4 Ω / 100V / 70V, FlexAmp Technology, Frequency Response: 20 Hz – 20 kHz,

22 Signal to Noise > 103 dB, Input impedance >10k, balanced or unbalanced, User- No's 1 176461.00 176461.00

configurable operating modes, UL, CE, RoHS/WEEE compliant etc all complete

SITC of 10.2" Apple iPad LED-backlit Multi-Touch display with IPS technology with

23 User Control Interface (UCI) Deployment etc all complete

SITC of Apple docking and charging station with all required accessories etc all

SITC of 8-Port Gigabit PoE+ Ethernet Smart Switch with 2 SFP Ports and Cloud

25 Management etc all complete

26 SITC of Wireless Access Point etc all complete No's 1 19333.00 19333.00

SITC of 1 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

27 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic No's 10 4995.00 49950.00

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all complete

SITC of 10 Meter Active Copper HDMI Cable, Data Rate: Up to 18.2Gbps, Colour

Depth: Up to 16 bits, Colour Formats: RGB 4:4:4 / Y’CBCR 4:2:2 / Y’CBCR 4:2:0,

28 Consumer Electronic Control (CEC), Auto Lip-Sync Correction, Audio Return No's 6 22666.00 135996.00

Channel (ARC), Enhanced Audio Return Channel (eARC), High Dynamic Range

(HDR) etc all complete

SITC of 1 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4 Lane

Displayport Alt mode (4K60FPS Video and Audio), Supporting peripherals via USB

29 2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive, Speakerphone and No's 5 6750.00 33750.00

Webcam) etc all complete

SITC of 15 Meter USB 3.1 Gen1 SuperSpeed Active Extension Cable TypeA/male

to TypeA/female, Supports 4K Webcam, SSD storage, Native USB2/USB1 and

30 USB3 extension, Plug and play compatible with PC, Mac, and Linux etc all No's 2 81042.00 162084.00

SITC of 2 Conductor 16 AWG Speaker Cable, stranded Bare copper conductors,

31 PVC/Nylon insulation, PVC jacket (as per actual) etc all complete

SITC of Category 6A Cable, 4 Pair, S/FTP, PVC jacket (as per actual) etc all

33 SITC of Various Cables & Connectors etc all complete No's 6 10531.00 63186.00

43 Digitally signed by AMIT

SITC of 16U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on

Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which are

34 not rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager & No's 1 20000.00 20000.00

Sufficient Rack hardwares etc all complete

44 Digitally signed by AMIT

SCHEDULE OF QUANTITIES-ART WORKS

S NO MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON DSR (INR)

Providing and fixing theme artwork/ any other as per direction and site requirement

1 MR from the local artisans as per the selection of the client and the architect.

Panels of various sizes No. 15 5334.00 80010.00

5 MR Providing and fixing CANVAS painting of different sizes as per the selection and Sqm 15 5264.00 78960.00

TOTAL ARTof client

WORKS 158970.00

45 Digitally signed by AMIT

S.N Description of Items Unit TOTAL Rate Amount

Manufacturing, providing and placing in position machine made factory assembled CMD/MD Cabin Table (as per the sample finally approved by the

1.0 client/ engineer in charge). -

Providing & Placing of CMD/ MD Cabin Table with side unit with following details and specification :- whose top is made of 50-55mm thick E1 grade

MDF (Environmental Friendly) with 0.4mm thick Veneer Finish, With Key board tray & Leatherite pad on the main table , size of leatherite is 900-

1200Wx 460-560Dmm , with edge banding. E1 grade MDF with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated

method) for better in-house quality. This should comply with (EN 120-1992). The Closed wiring tray is made of steel sheet thickness 1.2mm. Epoxy

powder coated spray color, baked at temperature 200 C°. Below the acess flap/ axial box ( 2-3 nos socket/Switch), Top supported on one side

suspended combo storage & One side Three drawer unit of size: 560Wx 670Dx 680Hmm with Dummy Box which is fixed with modesty panel,

Drawer & Modesty are made of 19mm thick E1 grade MDF Board (Environmental Friendly) with 0.4mm thick Veneer Finish, Drawer unit & side

combo storage connecting with 19mm thick MDF modesty panel with matching finish cover Edge banding (PVC) . E1 grade Veneer MDF with zero

urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120- -

1992). Side Combo Storage: Body of storages made out 19 mm thick (E1 Grade) MDF board with 0.4 mm veneer with PVC edge-banding. Side

Combo Storage is combination of 2nos swing shutter & Open space, E1 grade MDF to be used which provide no urea formaldehyde emission and

formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house

quality. This should comply with (EN 120-1992).The storage should have extruded aluminum handle, as per requirement. Storages should be

provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be

provided with Hinge-damping mechanism to enable soft closing of doors.Product should be BIFMA gold rated SCSglobal certified for inhouse air

quality and with 05 years warranty.

Low height back storage: Body of storages made out 19 mm thick (E1 Grade) MDF board with 0.4mm veneer with PVC edge-banding. shutter

madeout of E1 grade MDF to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not

more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality . All shelf are adjutable. This should comply with (EN 120-

1992).The storage should have extruded aluminum handle/ recess handle , as per requirement. Storages should be provided with adjustable

levelers. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-damping -

mechanism to enable soft closing of doors.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years

CMD/MD Cabin Table of Size: 2800mm(L1) x 2400mm(L2) x 1050mm(D1) x 600-650mm(D2)x 740-760mm(H1)

1.2 CMD/MD Cabin Back Storage of size: 2800Wx 400D x 740Hmm Nos. 2 1,08,080.00 2,16,160.00

Manufacturing, providing and placing in position machine made factory assembled Cabin Table (as per the sample finally approved by the client/

engineer in charge).

Providing & Placing of Cabin Table with side unit with following details and specification :- Providing and placing table Whose chamfered edge top

and legs are made of 38mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mmProv PVC edge-banding.E1 grade laminate

with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with

(EN 120-1992). The Modesty is Particle board wood Grade E-1 (Environmental Friendly) thicness 16 mm cover with Melamine Edge-Banding(PVC)

2 mm. Also legs are made of Particle board wood Grade E-1 (Environmental Friendly) thicness 38 mm, cover with Melamine. Drawer Unit : 3

drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-620 mm ( H). Drawer body

should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-

45 mm(H) x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most

drawer to provide extra stability. Low Height Swing Door Storage, Body of storages made out 18 mm thick Particle Board (E-1 Grade), melamine

finishes with 2 mm PVC edge-banding. E1 grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be

phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply

with (EN 120-1992). Front of Low height Storages should be made out of 16 mm thick Particle Board (E-1 Grade),melamine finishes with 2 mm.

PVC edge-banding fitted with extruded aluminum handle, as per requirement. Storages should be provided with adjustable levelers. Door Lock

should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-damping mechanism to

enable soft closing of doors. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Director/CVO Cabin Table of Size: 2400mm(L1) x 1950mm(L2) x 900mm(D1) x 500-600 mm(D2)x 740-760mm(H1)/620-640mm(H2).

2.3 Director/CVO Cabin Back Storage of size:2400Wx 450D x 740-760mm(H). Nos. 3 36,736.00 1,10,208.00

2.4 ED Cabin Back Storage of size:2100Wx 450D x 740-760mm(H). Nos. 2 31,248.00 62,496.00

Manufacturing, providing and placing in position machine made factory assembled Cabin Table (as per the sample finally approved by the client/

engineer in charge).

Providing and placing of table Whose top and legs are made of 25mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2

mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for

better in-house quality. This should comply with (EN 120-1992). The Modesty is Particle board wood Grade E-1 (Environmental Friendly) thicness

16 mm cover with Melamine Edge-Banding(PVC) 2 mm. Also legs are made of Particle board wood Grade E-1 (Environmental Friendly) thicness 25

mm, cover with Melamine. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-

480 mm (D) x 600-620 mm ( H). Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each

pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to

it where in one castor will be fitted to lower most drawer to provide extra stability..Low Height Swing Door Storage, Body of storages made out 18

mm thick Particle Board (E-1 Grade), melamine finishes with 2 mm PVC edge-banding. E1 grade laminate to be used which provide no urea -

formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated

method) for better in-house quality. This should comply with (EN 120-1992). Front of Low height Storages should be made out of 16 mm thick

Particle Board (E-1 Grade),melamine finishes with 2 mm. PVC edge-banding fitted with extruded aluminum handle, as per requirement. Storages

should be provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door

should be provided with Hinge-damping mechanism to enable soft closing of doors. Product should be BIFMA gold rated SCSglobal certified for

inhouse air quality and with 05 years warranty.

3.1 Officer Cabins Tables of size :Main Table 1800W x750D x 740-760Hmm, Return Table :1050W x 450D x740-760Hmm Nos. 5 76,160.00 3,80,800.00

3.2 Officer Cabins Back Storage of size: 1800W x 450D x 740-760Hmm Nos. 5 30,016.00 1,50,080.00

Manufacturing, providing and placing in position machine made factory assembled Workstations(as per the sample finally approved by the client/

4.0 engineer in charge). -

Providing and placing Hybrid Panel based Workstations with following specifications:Frame Work, Partition and Cable management : Frame work

shall consist of main spine and return spine of aluminium extruded section of minimum thickness of 1.2 mm. The overall thinkness of Panel base

System should be minimum 60-70 mm. The thickness of main spine partition panel should be minimum 60-70 mm, The thickness of Return spine

partition panel should be minimum 25-30 mm. The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel

should be made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the hollow for the

wire management. The panel outer aluminium frame is designed in such a way that it can be easily slide in to the columns/ Connectors by means of

stacking one over the other. Horizontal race way should be 150-170 mm height aluminium profile. There shall be complete cable management

arrangement with openable raceway above/ below worktop with provision for fitting electrical/data switches and holes for passing cable.Panel

Finishes : Finishes of panel above the worktop can be fabric pinup/fabric/laminate + Glass/metal writable marker board or single finish tile with -

raceway on main spine. Finishes of main spine panel below the worktop the hollow panel should be made of MDF tile and 0.5mm thick steel sheet

pasted on MDF which is powder coated with EPC finish 80-90 microns for durability on the inside as well on the outside. Raceway can be provided

above/below the worktop.Connectors/ Brackets: End Post: Aluminium 60-70 mm width – 1180-1220 mm height.Two way post: Aluminium 30-70

mm width –1180-1220 mm height.Three way post: Aluminium 30-70 mm width –1180-1220 mm height.Four way post: Aluminium 30-70 mm width –

1180-1220 mm height.Brackets: Table top supported with 50-60mm width steel bracket.

Table top to table top connector: 150-170 mm Width x 120-140 mm Depth width connector.

Worktop :Worktop Made of 25mm thick E-1 grade particle board finished with 2mm ABS edge banding. E1 grade laminate with zero urea

formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This should comply with (EN 120-

1992). The exposed edge of worktop shall be secured with 2mm thick PVC edge banding tape of approved colour. The height of Worktop shall be

740-760 mm from ground level. The particle board should be E-1 Grade with pvc edge banding. Drawer Unit : 3 drawer Metal pedestal of overall

dimensions internal and external dimensions 400 mm (W) x 450 mm (D) x 600 mm ( H). Drawer body should be made of CRCA of thickness 0.7-

0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-310 mm -

(W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra stability. Product

should be BIFMA gold rated SCSglobal certified for inhouse air quality. .

4.2 Linear Workststion of size: 1200Wx 600D x 1180/ 740mm(Worktop Height) x 1180-1220 mm Nos. 4 30,016.00 1,20,064.00

4.3 L Shape Workststion of size: 1500W1 x 1350W2x 600D1/D2 x 1180/ 740mm(Worktop Height) x 1180-1220 mm Nos. 12 43,456.00 5,21,472.00

Manufacturing, providing and placing in position machine made factory assembled Meeting Rooms Table(as per the sample finally approved by the

5.0 client/ engineer in charge). -

Providing & Placing of Conference Table, whose top and legs are made of 38 mm. thick Particle Board (E-1 Grade), melamine finishes with

matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method)

for better in-house quality. This should comply with (EN 120-1992). The Modesty is Particle board wood Grade E-1 (Environmental Friendly)

thicness 18 mm cover with Melamine Edge-Banding(PVC) 2 mm. Wire management: Access Flap and Switch Mounting Tray is provided in the

table. It is Made from Matt silver Anodized Aluminium extrusion and plastic moulded components to facilitate access of Electrical/Data/Voice -

sockets access from Top. Powder coated switch mounting tray made from 0.8mm and 1.2mm MS sheet(IS:513) which is powder coated 80-

90micron. Switches to be mounted on tray as per requirement. Provision for mounting 8Module Switch plate on switch mounting tray shall be

provided. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

5.1 23 Pax Rectangular Board room Meeting Table: 8250W x 1500D x 740-760Hmm Nos. 1 1,45,600.00 1,45,600.00

5.2 11 Pax Rectangular Meeting Table: 3750W x 1200D x 740-760Hmm Nos. 1 76,720.00 76,720.00

Manufacturing, providing and Placing High Back revolving chairs for CMD/CVOr Cabin Main Chair (as per the sample finally approved by the client/

6.0 engineer in charge). -

Providing and placing in position high back chair for Cabins with comfortable Backrest .Overall Size is : W 680 x D x 680X 1125-1215Hmm , Seat

Size: 490Wx 450Dx 435-525Hmm ,Chair Seat in leatheritte upholstery with headrest - Size: W722 x D712 x H1058 - 1185 mm having SW505 x

SD394 - 470 x SH419 - 546 mm ,Seat, Back: Mesh back, with Seat depth adjustment Back: Flexible back with built in fronds wrapped with lofted

mesh Arms:4D Armrests Lumbar: No external lumbar support. In built back support along the cradle providing total back support Mechanism:

Synchronized 3-point tilt, Pneumatic Height Adjustable & 6 Position Back Lock. Back Recline :Back reclines 24 degrees from the upright position,

Edgeless back.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 Years warranty.

Manufacturing, providing and Placing Mid Back revolving chairs for CMD/CVO Cabin Mid back visitor Chair (as per the sample finally approved by

7.0 the client/ engineer in charge). - -

Providing and placing in position Mid back chair for Cabins With comfortable Backrest. Overall Size is : W 680 x D x 680X 960-1050Hmm , Seat

Size: 490Wx 450Dx 435-525Hmm , Chair Seat in leatheritte upholstery- Size: W722 x D712 x H955mm,Back: Mesh back,Seat : Leatherite

Upholstered with Seat depth adjustment, Seat Pan Height adjustment:406mm-533mm Arms: 4D armrests, Mechanism: Balanced 3 point tilting

mechanism,Pneumatic Height Adjustable & 6 Position Back Lock, Back Recline :Back reclines 18 degrees from the upright position, Torsional flex

in the back, Lumbar: Asymetrical lumbar support adjustment, height adjsutable, Base: Five-star Black Polished Aluminium Base with castors Option Nos. 6 36,736.00 2,20,416.00

Hard/Soft;Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 Years warranty.

Manufacturing, providing and Placing High Back revolving chairs for Director Cabin/ Board Room Main Chair (as per the sample finally approved

8.0 by the client/ engineer in charge). -

Providing and placing in position high back chair for Cabins with comfortable Backrest,The seat shall be made up of 12mm thick hot pressed

plywood & upholstered with leatherite and moulded medium density foam. Overall dimensions of Chair shall be, Width of Chair - 640mm, Depth of

Chair - 645mm, Height of Chair-1185-1245mm as measured till pedestal . The back shall be designed with contoured lumber support for extra

comfort. Size of back shall be W-510+10m, H-715mm & size of seat shall be W-520+10 mm x D-450mm x H-473-533mm. Medium density foam

should be used in making seat & back which shall be moulded with density 45kg/m ³ and hardness load 16kgf. The seat and back should be

arrested together with spine made of 8mm thick HR steel and should be powder coated in black with 40-60 micron . The fixed armrest are made of

aluminuim with PU padded. The mechanism of the chair shall have following features : 360 degree swivel type, Knee Tilt mechanism, Seat & back Nos. 3 49,056.00 1,47,168.00

tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, multiple locking position. Gas lift allows 10mm of height

adjustment. The pedestal shall be made of die-cast aluminium base. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be

670mm pitch-centre-dia 700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Product should

be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 Years warranty.

Manufacturing, providing and Placing Mid Back revolving chairs for Director Cabin / Board Room Mid back visitor Chair (as per the sample finally

9.0 approved by the client/ engineer in charge). -

Providing and placing in position Mid back chair for Cabins With comfortable Backrest. The seat shall be made up of 12mm thick hot pressed

plywood & upholstered with Leatherite and moulded medium density foam. Overall dimensions of Chair shall be, Width of Chair - 640mm, Depth of

Chair - 620mm, Height of Chair-1000-1065mm as measured till pedestal . The back shall be designed with contoured lumber support for extra

comfort. Size of back shall be W-490+10m, H-530mm & size of seat shall be W-500+10 mm x D-450mm x H-470-530mm. Medium density foam

should be used in making seat & back which shall be moulded with density 45kg/m ³ and hardness load 16kgf. The seat and back should be

arrested together with spine made of 8mm thick HR steel and should be powder coated in black with 40-60 micron . The fixed armrest are made of

aluminuim with PU padded. The mechanism of the chair shall have following features : 360 degree swivel type, Knee Tilt mechanism, Seat & back Nos. 28 26,656.00 7,46,368.00

tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, multiple locking position. Gas lift allows 10mm of height

adjustment. The pedestal shall be made of die-cast aluminium base. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be

670mm pitch-centre-dia 700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Product should

be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Manufacturing, providing and Placing High Back revolving chairs for Cabin/ Meeting Room (as per the sample finally approved by the client/

engineer in charge).

Providing and placing High Back chairs for Cabin / Meeting Room. seat made up of insert moulded Polyurethane Foam upholstered with foam

laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded

frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable

seating posture, seat size 44.5 - 52.5 cm depth (approx.), 46.4 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.),

effective back height from Seat - 57 cm (approx.), polyurethane foam for seat having density 65±4 kg/m3, armrest top injection moulded in

polyurethane and mounted on the injection moulded height adjustable type armrest, armrest height adjustable up to 4.5 cm (approx) in 3 steps &

width movement adjustable, 360 degree revolving type. mechanism, single point control for seat and back adjustment, front pivot for tilt, tilt

adjustment for back in 3position locking with antishock feature, pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast Nos. 3 25,200.00 75,600.00

piece connecting to back with mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0 cm

approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors injection moulded in Nylon etc. all

complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Product should be BIFMA gold rated

SCSglobal certified for inhouse air quality and with 05 years warranty.

Manufacturing, providing and Placing Mid Back revolving chairs for Cabin Visitor / Meeting Room of (as per the sample finally approved by the

11.0 department). -

Providing and placing Mid Back chairs for Cabin Visitor / Meeting Room .Chair seat made up of insert moulded Polyurethane Foam upholstered

with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece injection

moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving

comfortable seating posture, seat size 44.5 - 52.5 cm depth (approx.), 46.4 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62 cm

height. (approx.), effective back height from Seat - 57 cm (approx.), polyurethane foam for seat having density 65±4 kg/m3, armrest top injection

moulded in polyurethane and mounted on the injection moulded height adjustable type armrest, armrest height adjustable up to 4.5 cm (approx) in

3 steps & width movement adjustable, 360 degree revolving type. mechanism, single point control for seat and back adjustment, front pivot for tilt, Nos. 22 18,704.00 4,11,488.00

tilt adjustment for back in 3position locking with antishock feature, pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast

piece connecting to back with mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0 cm

approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors injection moulded in Nylon etc. all

complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Product should be BIFMA gold rated

SCSglobal certified for inhouse air quality and with 05 years warranty.

Manufacturing, providing and Placing High Back revolving chairs for Cabin Main Chair (as per the sample finally approved by the client/ engineer in

12.0 charge). -

Providing and placing High Back chairs Cabin. Chair Overall size: 680Wx 680Dx 1125-1215Hmm, Chair seat made up of insert moulded

Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is

made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable

lumbar support for achieving comfortable seating posture, seat size 450 - 460 mm depth (approx.), 490 - 500 mm width (approx.), sub assembly

back size 540 mm- 620 mm height. (approx.), effective back height from Seat - 560-570 mm (approx.), polyurethane foam for seat having density

65±4 kg/m3, armrest top injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest, armrest height

adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable, 360 degree revolving type. mechanism, single point control for seat and Nos. 6 15,120.00 90,720.00

back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock feature, pneumatic height adjustment of 8.5 cm spine

bracket made of aluminum die cast piece connecting to back with mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin wheel

castors (castor wheel dia. 6.0 cm approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors

injection moulded in Nylon etc. all complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Product

should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Manufacturing, providing and Placing Mid Back revolving chairs for Workststion/ Reception & Staff table chair (as per the sample finally approved

by the client/ engineer in charge).

Providing and placing Mid Back chairs for Workststion/ Reception & Staff table chair. . Chair seat made up of insert moulded Polyurethane Foam

upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece

injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for

achieving comfortable seating posture, Overall chair size: W61.0 -62.0cms , D 61.0-63.0cm , H96.0-105.0cm, Seat size 46.5 - 51.5 cm depth

(approx.), 45.4 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.), effective back height from Seat - 57 cm

(approx.), polyurethane foam for seat having density 65±4 kg/m3, armrest top injection moulded in polyurethane and mounted on the injection

moulded height adjustable type armrest, armrest height adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable, 360 degree

revolving type. mechanism, single point control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with Nos. 31 12,320.00 3,81,920.00

antishock feature, pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast piece connecting to back with mechanism,

The pedestal shall be made of nylon base.it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 670mm pitch-centre-dia

700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Product should be BIFMA gold rated

SCSglobal certified for inhouse air quality and with 05 years warranty.

Manufacturing, providing and Placing Medium height Storages (as per the sample finally approved by the client/ engineer in charge).

Providing & Placing of Medium Height metal storage with wooden shutter & top. Storage body and shelf shall be made of 0.8mm CRCA steel

sheet, Shelves and doors should have stiffeners for better strength and load bearing capacity. Auto engineer in charge)Hinges for better

adjustment of doors. Chrome plated three way Recess type spring loaded rectangular snap shut handle cum lock with duplicate keys. Stoarage

unit shall be made of 100% virgin Epoxy Powder Coated CRCA steel confirming to IS : 513 CR2 (Cold Reduced Carbon Steel Sheets & Strips

(Part 1), 2016, procured from primery manufacturers like TATA Steel, SAIL RINL, Jindal etc. (Manufacturer Test Certificate to be produced).

Furthermore,Complete material shall pass through 7 stage, NANO- TECHNOLOGY based Pre-treatment plant prior to powder coating to make

corrosive resistant. Powder coating should be done on Fully Automatic Powder Coating Plant to ensure smooth, uniform and highest quality

levels of Powder Coating.Each Compartment's shelf should have uniformly distributed load capacity of >35 kg. Front of Medium height Storages

should be made out of 16 mm thick Particle Board (E-1 Grade), melamine finish with 2mm PVC edge- banding fitted with extruded aluminum

handle as per requirement. Storages should be provided with adjustable levelers Door Lock should be of three- way lock mechanism. Door

should be provided with Hinge-damping mechanism to enable softclosing of doors. Product should be BIFMA gold rated SCS global certified for

inhouse air quality and with 05 years warranty.

Manufacturing, providing and placing in position machine made factory assembled Sofas for lobby & waiting Area (as per the sample finally

approved by the client/ engineer in charge).

Providing & Placing sofa with following specification ,Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and

applying anti-termite paint of approved brand & manufacture to ensure stability of the frame, On the wooden base frame of the sofa to be provided

with M.S. helical spring, 1 side & 2 back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing fina finished

with fabric (Titch). Seat - 40-45-32Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) - 40-

45 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall rest on SS

frame supported on legs made of SS chrome plated section of cone shape of height 225mm. All SS work should be in grade 304. Base of sofa

should be made of 225mm H SS chrome plated curved base so as to give proper support to the seat. Height of the base of sofa shall be 200- -

250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved fabric (titch) of A grade of

desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. The sofa shall be provided with

adjuster made uup of injection plastic in black color. The sofa can should be configured in different form as per the client requirement. Complete as

directed by the Engineer in charge.

15.1 3 seater sofa overall dimension - 2050mm W x 760-780mm D x 680-700mm H Nos. 2 58,800.00 1,17,600.00

15.2 1 seater sofa overall dimension - 810mm W x 760-780mm D x 680-700mm H Nos. 4 29,400.00 1,17,600.00

Manufacturing, providing and placing in position machine made factory assembled Sofas for Cabins (as per the sample finally approved by the

client/ engineer in charge).

Providing & Placing sofa, Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti-termite paint of

approved brand & manufacture to ensure stability of the frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, sides

& back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing final finished with leathrite have basic cost not

less than 1000/- Pet Mt. Seat - 40-45Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) -

40-45 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall rest on

SS square frame of size 25mm x 25mm supported solid wooden section of height 225mm. All SS work should be in grade 304. Base of sofa should - -

be infilled with suitable woode sections so as to give proper support to the seat. Height of the base of sofa shall be 200-250mm(approx). Finished

width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved leatherite of A grade of desired shade duly

embossed including providing & fixing of all other related materials including hardwares etc. complete as directed by the Engineer in charge.

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality. Product should be BIFMA gold rated SCSglobal certified for inhouse

air quality and with 5 years warranty.

16.1 3 seater sofa overall dimension - 1860mm W x 820-860mm D x 780-820mm H, Nos. 5 58,240.00 2,91,200.00

16.2 1 seater sofa overall dimension - 810mm W x 820-860mm D x 780-820mm H, Nos. 10 24,080.00 2,40,800.00

Manufacturing, providing and Placing Center & Corner table (as per the sample finally approved by the client/ engineer in charge).

Providing and fixing tables of Centre table Size - 1100mm W x 500mm D x 365mm H for whose top & Base are made of Particle board wood

Grade E-1(Environmental Friendly), thickness 19mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea

17.0 formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. Product should be BIFMA gold rated Nos. 3 14,280.00 42,840.00

SCSglobal certified for inhouse air quality and with 05 years warranty.

Providing and fixing tables of Side table Size - 450mm W x 450mm D x 365mm H for whose top & Base are made of Particle board wood Grade E-

1(Environmental Friendly), thickness 19mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde

18.0 emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. Product should be BIFMA gold rated SCSglobal certified Nos. 8 8,288.00 66,304.00

for inhouse air quality and with 05 years warranty.It should be model no. Walker of Rockworth, Laginutas of Steelcase or Accord of Godrej

Providing and fixing tables of Centre table Size - 1200mm W x 600mm D x 400mm H, for whose top is made of Particle board wood Grade E-

1(Environmental Friendly), thickness 25 mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde

emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992).The

understructure is made of SS. .Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Providing and fixing tables of Side table Size - 500mm W x 500mm D x 365mm H, for whose top is made of Particle board wood Grade E-

1(Environmental Friendly), thickness 25mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde

20.0 emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992).The Nos. 8 8,736.00 69,888.00

understructure is made of SS. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Manufacturing, providing and placing in position machine made factory assembled Cafeteria Table (as per the sample finally approved by the

21.0 client/ engineer in charge). -

Providing and placing Cafe table, Worktop shall be made out of 25mm thick E-1 grade (Environmental Friendly) particle board cover with laminate

and all the edges of worktop shall be provided with machine pressed 1.5-2 mm thick ABS edge banding glued with hot melt EVA glue. E1 grade

laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This should

comply with (EN 120-1992).The understructure is made of 2mm thick Steel square pipe dimension 38 x 38 mm with Epoxy powder coated spray -

paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid

method). Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years warranty.

21.1 Rectangular Table of Size - 1200mm W x 750mm D x 740mm H Nos. 2 20,720.00 41,440.00

21.2 Rectangular Table of Size - 1800mm W x 450mm D x 1100mm H Nos. 3 21,280.00 63,840.00

Manufacturing, providing and placing in position machine made factory assembled Cafeteria Chair (as per the sample finally approved by the client/

22.0 engineer in charge). -

Providing and fixing Cafe chair of Size - 400mm (W) x 500mm (D) x 830mm (H) 450SH. Seat / Backrest: Polypropylene plastic (PP) injection in a

specific design. The seat and back are made up injection molded high impact strength polypropylene polymer (PP) compound with indoor grade UV

Resistance. Base:PP finish. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality. Leveller are made of high impact

strength polypropylene polymer compound with indoor grad UV Resistance and pressed fitted with tubular frame.Product should be BIFMA gold Nos. 12 5,432.00 65,184.00

rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Manufacturing, providing and placing Compactor Table (as per the sample finally approved by the client/ engineer in charge).

Providing & Placing of Mobile Storage of size: 915 W x 450D x 2080Hmm wherein each body should be of following configuration and specification

consisting of One no.Fixed Single one side openable Unit & One, one end single openable mobile unit & between the Main Fixed unit & end mobile

unit having single/ double side mobile unit. The System shall be modular & movable type(Knock Down) with 4-5 loading levels. Each Shelves

loading capacity should be 42-48 kg. Each unit shall be connected from the End back with the Dust proof arrangement with the help of Tong and

Groove system arrangement . Handle shall be made of ABS in round type with Dia of 350mm minimum with a safety lock System at the Centre.

channel of the compactor shall be U – Channels formation to carry more weight and to get more rigidity. Mechanical arrangement shall be

concealed inside the System, only handle shall be installed at the outer Sheet of the Compactor as Shown in the Drawing. The component

specification shall be as follows. channel U - Section: Section shall be minimum 1.0mm thk. Material Thickness : Back Sheet : 0.8mm; Shelf:

0.8mm; Side Sheet: 0.8mm;Under Carriage Frame - HR sheet 2.5mm thick. channel Post: U - Shaped Post. Wheel: Iron die casting with anti-rust

coating, Loading : 950-1000kg/Wheel There shall be central locking system with wire, handle lock, Rail lock Plate & Rail Lock assembly in the

chain box cover. The material used for the system shall be as per following standards:- Steel CRCA IS - 513 D HR 10748 All steel component shall

be given 7 tank ntirust Phosphting treatment and to shall be Powder coated and baked at 200o centigrade with 60 -70 microns quoting thickness.

All steel components shall be given a thorough antirust treatment. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality

and with 05 years warranty.

Manufacturing, providing and placing Reception Table (as per the sample finally approved by the client/ engineer in charge).

Providing & Placing of Rect shape Reception Counter of size: 2700W1 x 750D1 x 1050/740Hmm. Reception desk Top & Legs are made up of

38mm thick E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air

quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick PVC edge banding tape of

approved colour. The top shall be made of 38mm thick pre laminated particle board with PVC edges. Front hanging panel is madeout of 18mm

thick Decorative E1 Gedae board . The product should be from approved make, Complete as per specification mentioned above & image under the

guidance and aprroval of project architect/consultant & engineer in charge. Drawer Unit : 3 drawer Melamine(1D+1D+1F ) pedestal of overall

dimensions internal and external dimensions 420 mm (W) x 450 mm (D) x 600 mm ( H). Drawer body should be made of E1 grade 1 grade laminate

with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This should comply with Nos. 1 1,86,440.00 1,86,440.00

(EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick PVC edge banding tape of approved colour.Product should be

BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

TOTAL (INR) 71,85,040.00

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Rate DSR Amount Non-DSR Amount

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of required size and

shape with arrangement of screws in the letters itself for mounting on the walls or pasting using

3M VHP Tape. Fixing complete as per directions of the engineer. The Sizes would be calculated

in Sqft as per Logo Design provided. Each 2 35,976.00 71952.00

Tentative Size 42"x60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names/ Departments written using

plottercut vinyl or laser cut acrylic letters in approved colour.Inserting provision for changing

names .Fixing provision using 3M VHP double sided tape as required.

Signage Size 12x5 inch

3 FIRE EVACUATION MAP/ SIGNAGE

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan

Printed on photoluminescent media and inserted between the two frames. Should be fixed on the Each 2 2,673.00 5346.00

wall using 4 Screw/ SS studs. Size 12 inch x 17 inch

4 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic sheet of 8 mm

thickness laser engraved, Transformer to be inbuilt. Maintenance - free sealed nickel cadmium

battery included • 120V/277V AC Operation • Crystal clear acrylic face panel• Engraved letters

increase visibility • Anodized aluminum faceplate • Field applied chevron directional indicators Each 2 3,289.00 6578.00

simplify installation • Long life, energy-saving LED lamps • Dual-voltage 120V/277V AC

Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

5 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet at base with

photoluminescent film self adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on top.

Both side / Single Side facing Complete including fixing on wall with screws and washers or

hanging on ceiling with GI chain/GI Bar complete as per technical specifications and directions of

Photoluminescent signages Each 2 536.00 1072.00

53 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: LANDSCAPE

S NO Description Unit Qty Rate DSR Amount Non DSR Amount

“FRP Planters; Supply, Testing and Commissioning of

FRP Planters. The Planters can be used both Indoor

and Outdoor. The Planters are handcrafted in India. It

is made using Fibre Reinforced Plastic (FRP) and has

Planter features such as Light in Weight can withstand various

1 Plain - Environmental Conditions such as Harsh weather, UV Nos. 3 3,844.00 11,532.00

14x14x14 Rays and Moisture. It has Fungus, Fire and Frost

Resistance. In Terms of Sustainability, Fibre is

considered to be Eco-Friendly and can be Recycled."

“FRP Planters; Supply, Testing and Commissioning of

FRP Planters. The Planters can be used both Indoor

and Outdoor. The Planters are handcrafted in India. It

is made using Fibre Reinforced Plastic (FRP) and has

features such as Light in Weight can withstand various

Environmental Conditions such as Harsh weather, UV

Rays and Moisture. It has Fungus, Fire and Frost

Resistance. In Terms of Sustainability, Fibre is

considered to be Eco-Friendly and can be Recycled."

54 Digitally signed by AMIT

“FRP Planters; Supply, Testing and Commissioning of

FRP Planters. The Planters can be used both Indoor

and Outdoor. The Planters are handcrafted in India. It

is made using Fibre Reinforced Plastic (FRP) and has

Box Planter features such as Light in Weight can withstand various

18x18x18 Environmental Conditions such as Harsh weather, UV

Rays and Moisture. It has Fungus, Fire and Frost

Resistance. In Terms of Sustainability, Fibre is

considered to be Eco-Friendly and can be Recycled."

Providing & fixing Artificial silk plants with combination

3 or 4 types uniformaly ditributed plants on wall as well

as ceilig suspended creepers with necessary wire or

hangin arranement included. Plants which ultraviolet

blocking chemicals are impregnated into the materials

4 during the manufacturing process. These chemicals Sqm 5 6,214.00 31,070.00

are blended with the plastic or PVC parts Installation

Installation is done on Waterproof ply board with staple

1Sq Mtr X 1 Sq Mtr

Providin & fixing Artificial silk plants with combination 3

or 4 types uniformaly ditributed plants on wall as well as

ceilig suspended creepers with necessary wire or

hangin arranement included. Plants which ultraviolet

blocking chemicals are impregnated into the materials

5 during the manufacturing process. These chemicals Sqm 5 2,370.00 11,850.00

are blended with the plastic or PVC parts Installation

Installation is done on Waterproof ply board with staple

55 Digitally signed by AMIT

Supply of textured stone or solid finished, light weight

(Pls choose : shape: round/ oval/ rectangular/ conical/

elliptical) (Pls choose :volume : xxx ltrs) (Pls choose

:color: beige/ white/ grey/ black) full bodied, exterior

grade, joint/ layer free, homogeneous planters made

with premium quality LLDPE polymer manufactured

with precision rotational moulding process. The

planters shall be made of 100% recyclable content,

industrial grade quality polymer, non- metallic, shock

proof, asbestos and glass fiber free compounds.

Planters shall be rust proof, UV-resistant, anti-frost, no

peeling and easy to clean. OEM / authorized supplier to

provide 1 year warranty against fading & any

manufacturing defect. Design, color and size as per

Supply of double layered translucent backlit (Pls

Choose : Shape: cylindrical/ elliptical / conical/ round/

square) hand crafted (dye) pattern planters of volume

Pls Choose :XX letter; approx. dimension Pls Choose

:XXXX in plain or stone finish. Planters to be

indigenously made by rotational moulding, with

homogeneous 100% recyclable, industrial grade

LLDPE polymer mix, with textured surface and stone

match finishes. Planters to have concealed shock

resistant back lighting system with secured supply wire

and an integrated water outlet hole & plug, peel proof

construction, asbestos free, light in weight, without any

joints, rust proof, UV stabilized, anti-frost feature and

easy to clean. OEM / authorized supplier to provide 1

year warranty against fading & any manufacturing

defect. Design, colour and size as per selection.

Plantation: Supply and installation of Natural Plant with

sand, fertilizer etc.

56 Digitally signed by AMIT