Providing Transformer Plinth with Cble Duct, Approach Road, Chain link Fencing, and Section Office Building along with Cash Collection Center in the proposed perungalathur 33 /11 KV SS premises.

Amount

Earth work excavation in all soils and subsoils, hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders with an initial lead of 10m and initial lift of 2.50m in including all materials labour, T&Ps etc., complete.

Supplying and filling in foundation and basement with filling Sand in layers of not more than 15 cm thick well rammed, watered and compacted complete, as per standard specification

Refilling with excavated earth wherever required including labour for filling, watering and consolidating with all lead, lift, etc, as per standard specification.

Laying plain cement concrete M10 mix using 220kg minimum cement content and using 20mm HBG (machine broken) for foundation and basement leveling course including cost of all materials, lead, lift and labour complete as per std.specification.

Dismantling the RCC, PCC and Brick Masonry in cm any met with during excavation for foundation trenches and clearing the debris from site including all labour charges, T & Ps etc., compete.

Dismantling the Brick Masonry

Dismantling the PCC.

Dismantling the RCC

Applying antitermite treatment to the foundation and basement of the building as per standard specification of different stages including cost of chemicals, lead, lift and labour etc., complete as per direction of Engineer.

Laying reinforced cement concrete M25 using 12MM to 20MM HBG metal and 360 kg of minimum cement content for various types of work including necessary, strutting, shuttering, formwork, lead, lift, labour etc., complete but excluding cost of reinforcement. column, Raft, Beam, Slab, etc.,complete.

Column upto basement

Grade Beam

Column in Ground floor

Lintel Beam in Ground Floor

Sunshade in Ground Floor

Roof beam in Ground Floor

Roof Slab in Ground Floor

Column in First Floor

Lintel Beam in First Floor

Sunshade in Firsl Floor

Roof Beam in First floor

Roof Slab in First floor

Cast in situ slab

RCC Side Wall

Supply, fabrication and placing in position of MS / RTS / TMT grills(Fe 415 Grade steel) for reinforced cement concrete works including cost of steel, binding wire, labour, lead, lift, etc., complete.

Building Brick Masonry in cm 1:6. using II nd sort chamber burnt bricks of size 230x110x70mm at all levels including cost of all required materials, labour, lead, lift, etc., complete as per std specification and direction.

In Ground floor

In First floor

Plastering with cement mortar over the concrete/BM surfaces at all levels both outside and inside of the building including cost of all materials, hacking the surfaces, scaffolding, lead, lift, curing, etc., complete as per the std. specification and direction.

Ceiling plastering with cm 1: 3, 10mm thick

plastering in C.M. 1: 5, 12mm thick, Inside/outside

Floor Finish with anti skid tiles of spartek or johnson, kajaria, nitco of required size Anti-Skid in all floors over a base layer of C.M. 1:3. 20mm thick laid in-situ and pointed with same coloured cement for bath & FOL etc., including cost of tiles and other materials, labour, lead, lift etc, complete, and as directed by the Engineer

Providing and fixing of ABS (Acrolynitrile Butadiene Styrene) Door using factory made plain FPVC (Foamed Polyvinyl Chloride) door frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 10 Nos. of 50mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners to be provided for each vertical member, stiffeners of („U‟ Channel of size 29 x 9 x 1mm, 150mm long) 3 Nos. at hinge point, frame reinforcement of („U‟ GI Channel of size 46 x 22 x 0.06mm), bottom tie rod of („U‟ GI Channel size of 15 x 15 x 1mm), the ABS Shutter of 35mm thick factory made plain pre-laminated. ABS (Acrolynitrile Butadiene Styrene) door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32 x 32mm - 2 Nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of ball bearing butterfly hinges - 3 Nos. for each shutter and ISI make SS round lock complete, including cost of Materials, conveyance and all other incidental charges and labour charges for fixing the Door neatly etc., complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)/Sliding Type from the shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work

Supplying and fabricating and fixing in position of anodized aluminum natural color matt finish Louvered type ventilator of size 1.18 x 0.58m glass fixing anodized aluminum grove clip with screws and fixing 4mm thick frosted glass lowers model including cost of all materials and all leads, lifts, labour for fabricating and fixing in position including frilling holes in R.C.C. work and brick work etc., complete as per standard specification

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia CP Angle cock, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc. and to providing wiring to Electronic, flushing urinal power point. including cost of all materials, leads, lifts, labour for fixing etc., complete.

Supplying and fixing of European water closet with ‘P’ or ‘S’ trap with double flapped seat and seat cover with brass hinges and 10lit capacity PVC low level flushing tank with all fittings including cost of all materials,all leads, lifts, labour for fixing etc, complete as per standard specification.

Supplying and fixing in of position P V C Nainey Trap of approved make & quality fixed over a bed with C. M. 1:3, and fixing stainless steel Grating including the cost of all materials, labour, lead, lift, T & Ps etc., complete.

Floor Finish with anti skid tiles of spartek or johnson, kajaria, nitco of required size Anti-Skid in all floors over a base layer of C.M. 1:3. 20mm thick laid in-situ and pointed with same coloured cement for bath & FOL etc., including cost of tiles and other materials, labour, lead, lift etc, complete, and as directed by the Engineer

Supplying and fixing of PVC Door of size 750x2100mm with PVC shutters single leaf in , outer frame of size 100x75mm and the shutter by single mould SINTEX make with furniture fittings 3Nos. 75mm Ano. Alu. Hinges, 2Nos. 150mm tower bolts, 1No. 150mm aldrop, including cost of all materials, complete as per direction.

Supporting,Fabricating and fixing in position Ano.Alu.Natural colour matt finish fixed typeglazed partition with extrude Alu. Fabricated grill for Cash Collection Counter 1.50 m heightwith opening door ( 300 x 300 mm ) usingAno.Alu.Rectangular type of size 62 x 37 mm0.62 kg/m on both sides of commercial sizewith 5 mm thick plain glass of 1.50 m heightapproved quality and clip 17.15 x 17.27 mm0.178 kg/m fixing rubber lining on top of Ano.Alu. Rectangular hollow section 1.0 m Vertical1.75 m height with 8 / 9 mm thick Novapan / Duratuff Both sides Prelaminated Exteroirgrade particle board, as per drawing includingnecessary Alu. " L ' angle, cost of all materials,leads,lifts,labour for fabrication fixing in position etc,complete.

Supplyng and Providing Cash Collection Centre Table of over all size of 1.30 x 0.60 mand to a height of 0.75 m by using 18 mmthick approved quality piywood along withcash drawer arrangments with Denominationboxes and arrangements for placing CPU,UPS and battery with lock and handle cashdrawer,keyboard and hand rest counterback and counter sides,separates arrang-ments and all outer edges finished withteak wood lipping with outer area / usagearea by 1 mm thick Sun mica of approvedquality and colour all others areas suchas not visible by planning with two coatsenameled paint matt finish over one coat ofprimer,necessary holes for cables,paper solt,wheeling arrangements for key board and thecounter sides extended to a length of 1.30 mfrom the table and with hand rest arrangementsof 0.60 m equalies space on consumer sideand counter side with counter separation atevery 1.33 c/c as directed by the Engineer atsite, including cost of all materials, with labourand lead,lifts,etc,complete.,

White washing two coats with approved cement paint over newly cement plastered surface, ceiling, sunshade,loft bottom and other surface, including cost of all materials, watering, curing, lead, lift, etc., complete, as per std specification.

Inside wall paint two coats with best quality plastic emulsion of approved colour with two Coats over a primer coat and putty over cement plastered surface including cost of all materials , leads, lifts, labour , scaffolding etc., complete.

Outside Wall paint with best quality Plastic Emulsion of approved Colour two Coats over a primer using white Cement and putty over plastered surface at all levels including cost of all materials, scaffolding,leads,lifts,labours, brushes curing etc., complete.

Painting wood work with two coats of Synthetic enamel paint of approved quality and including cost of all materials, labour, lead, lift etc, complete as per std specification and as directed by the Engineer.

Supplying, fabricating and fixing in position of MS 'I' section and MS channel framed and MS base plate with GI bolt & nuts with necessary including welding, grinding at various levels as per approved design of the Engineer, including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

Window grills, gates, staircase handrails / ladder

Ms tube 50 mm dia & MS angle/Channel for truss work

MS rail 90 lbs

Supplying, laying and jointing of PVC pipes of approved brand and ISI quality for waterline, sewerling, and rain water downfall pipe etc., including cost of all materials and GI specials, fixing the pipes over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed.

PVC Pipe 110mm dia. 6kg/sqcm

PVC Pipe 40mm dia. 10kg/sqcm

PVC Pipe 32mm dia. 10kg/sqcm

PVC Pipe 20mm dia. 10kg/sqcm

Supplying and fixing of Rolling shutters of clear opening using 18 gauge M.S. Sheet TATA STEEL with Electrically Operated type. The top shaft is well designed with top roller fitted with high tension springs with special quality of cast iron pulleysand ball bearing arrangements and painting with one coat red oxide metal primer to the clear opening, including cost of all materials, fabrication, transportation, and fixing in position Godrej 7 levers locks 2Nos, for each shutter and labour charges complete., as directed by the Engineer.

Supplying and fixing of 2 HP Texmo/ Kirlosker/Suguna Jet pump with all accessories, suitable starter, main switch fusecut, earthing arrangements, board for fixing main switch/fuse cuts/starter, check/foot valve, cost of all materials, labour for erection at site, bolts, nuts required for erection, lead, lifts, labour etc.,complete (The pump and starter should be tested by Engineer on running condition) for drinking water sump.

Supplying and fixing of S.W.Gully trap 150mm with pvc gratings including cost of gulley trap with grating and all leads, lifts, labour for fixing in position etc, complete.

Painting new steel work with two coats of enameled paint over a coat of red oxide [colour and brand should be got approved by Executive Engineer] including cost of all materials, lead, lifts, labour, etc, complete.

Supplying and fixing of glazed 22"x16" wash basin (ISI quality of approved brand) with C.I. brackets c.p.pillar tap and all connection of water inlet and waste water connection 12mm wheel value soap container and fixing of 5mm thick mirror best quality approved brand along with Aluminium Towel rod. Mirror should be framed in anodized aluminium frame 2"x16" of size complete as per standard specification and as directed by engineer.

Supplying and fixing, testing & commissioning of 300mm (12") dia AC Exhaust fan including wall bracket and accessories of standard make fixed on the wall and connections.

Supplying and providing wiring for lights, fans,Duct lights etc., using with 2.5 sq.mm PVC insulated copper wire for phase and neutral and 1.5 sq.mm PVC insulated copper wire for looped earthing in 25mm rigid conduit .PVC accessories with Metal Box in flush with wall with 5A Modular Switch Legrand/Crabtree/MK with Suitable Base plate, Cover plate with continuous earth wire connection of 14 SWG TC wire for PVC light point / Tube light point / Buzzer inclluding cost of all materials lead, lift, etc., complete. The switch box of normal size 12"x8"x3" should be used.

Suppyling and providing wiring for Duct lights and additional heater point using with 2.5 sq.mm PVC Insulated copper wire for phase ans neutral and 1.5 sq.mm PVC Insulated copper wire for looped earthing in 25mm rigid conduit GI pipe not less than 25mm width and .PVC accessories with Metal Box in flush with wall with 5A Modular Switch Legrand/Crabtree/MK with Suitable Base plate, Cover plate with continuous earth wire connection of 14 SWG TC wire for Bulk head fittings and Heater lamp points inclluding cost of all materials lead, lift, etc., complete. the switch box of normal size 12"x8"x3" should be used.

Supplying and providing wiring 5amp plug point using two runs of 2.5 sq.mm PVC insulated copper conductor along with 1.5 sq.mm copper wire for earthing and also including 5amps two in one socket controlled by 5amp flush type switch on suitable Switch Box and connections.

Supplying and fixing, testing & commissioning of Wall Mounted LED 18W LED 4' with necessary connections etc., of suitable for control room

Supplying and providing wiring with 2 runs of 4 sq.mm PVC insulated copper wire alongwith 2.5 sq.mm PVC insulatd copper wire for earthing inside the PVC rigid conduit not less than 25mm width and 2mm thickness for running circuit main from DB to all Switch Boxes, motors and inverter. Neutral should not be looped.Neutral in back and earthing in green to be followed.

Supplying and fixing,testing & comissioning of AC Main Panel Board as per specification and drawing. 1.M.S.BOX 600x450x200mm =1 No 2.100A, Porcelain fuse unit (500 V) =1 No 3. 32A TPN MCB =1 Nos 4.16A/32 DP MCB =1 Nos 5.16A SP MCB =1Nos

Supplying,Providing and fixing of cupboards 0.45 m width with 3 racks using water proofplywood 19 mm thick branded quality withsunmica 1mm thick of approved colour andbrand for front side and painted with enamelledpaint over a cost of wood primer for insideportion and fitted with multipurpose lock foreach cupboards including Alu.Hinges 2 Nos.Handles 2 Nos. Alu.Tower Bolts 2 Nos.including cost of all materials teak,lifts.labouar for fixing etc., complete.

Providing the new powder coated GL Sheets [ with ridge and front curve ]of approved colour and quality including fabrication, transporting and fixing charge, cost of required size approved quality self thread screws and Bitumen washer , cost of all materials, lead, lift, labour, fixing in position, etc., complete as directed by the Engineers at site.

Supplying and providing wiring to Motor Room Points from motor to starter switch boxes using 2 runs of 4 sq.mm PVC insulated copper wire along with neutral PVC casing/PVC pipe not less than 25mm width with 2mm wall thickness including cost of materials, labour charger, switch board of size 18"x12"x3" with 16 Amps doublepole main switch and providing sufficient pace of providing and connections

Supplying and fixing of PVC water tank of approved brand (sintex)1000 litre capacity in terrace floor as directed by engineer including cost of sintex water tank, labour for fixing in position, all leads,lifts etc complete as directed. For Bore Water & Metro Water

PCC 1 : 2 : 4 Grade using 20 mm HBG metal for padding and footing concrete without form work including cost of all materials curing, labour lead and lift. etc., complete.

Supply and fixing of GI chain link fencing 2" x 2" using 10 guage galvanised Iron wire (of all sizes) type confirming to ISI specification 278/1982 including cost of all materails labour charges for laying, tensioning, cost of GI binding wire, hire charges for T&P lead lift etc complete..

Supplying and fixing, testing and commissioning of 100W Board light fittings

Providing Granular Sub base by Providing Grade-I material by Mix in place method spreading in uniform layers including all labour charge etc. complete

Supplying and fixing of RCC manhole cover of size 600x600mm (HD) or RCC cover slab with pedastal square for the sewer manholes including cost of all materials, labour charges, etc., complete as per std. specification and as directed by the Engineer.

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3, 12mm thick and Providing and Filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly, including cost of all materials, lead, lift, labour,curing etc., complete complying with standard specification and as directed by the Engineers at site.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

THE INDIA POWER FUTURE (BID ID -1095184)

K RAJARAM (BID ID -1092810)

PREMKUMAR (BID ID -1094447)

M.JAYAVEL (BID ID -1095150)

G.CHANDRASEKARAN (BID ID -1095316)