REPAIR TO ROOF TREATMENT AND SEEPAGE AND MISCELLANOUS WORK UNDER AGE BR I OF GE NW VASCO

Amount

Dismantling/Taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing dust, dirt and washing the roof and removing the dismantled debris to a distance exceeding 200 m but not exceeding 3000m spread and levelled as directed by Engineer-in-Charge.

M & L for surface preparation by using modified mortar using Dr. Fixit Pidicrete URP 10% by weight of cement of M/s Pidilite Industries Ltd in the ratio of 1:3:5. For Visible cracks not giving hollow sounds need to be directly treated by creating a "V" groove (5 X 5 mm), cleaning the groove with water jet and finally sealing it with a Non-shrink repair mortar. Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.

M&L for applying the primer Dr. Fixit Primeseal as specified maintaining 2:1 dilution ratio. The substrate during application of primer to be in SSD condition. Providing & Applying microfiber reinforced acrylic based flexible waterproofing coating Dr. Fixit Newcoat of M/s Pidilite Industries Ltd having properties - Elongation at Break, 80 %, tensile Strength, 1.2 n/mm2, adhesion Strength, 1 n/mm2. Apply 1st coat of Dr. Fixit Newcoat at the rate of 2 sq. mt. per litre, Apply second & third coat of Dr. Fixit Newcoat with the same application coverage to achieve DFT of 1 mm. Drying time between coats will be 6 to 8 hrs. Air cure the coating for 7 days, before water pound test. The System comes with 10 year waterproofing warranty from Pidilite Industries . Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.

Dismantling of single layer mangalore pattern roofing tiles complete all as directed

M&L for Laying of Mangalore tiles and Providing and making mortar battens with 1:3 cement sand mortar followed by laying Mangalore tiles after 7 days curing of mortar battens including fixing of ridge tile with 1:5 cement and mortar

Providing & applying Dr Fixit Roofseal, cold applied bituminous waterproofing coating of M/s Pidilite Industries Ltd including sprinkling of coarse sand when the surface is tacky dry Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.

Providing & applying the primer Dr. Fixit Primeseal as specified maintaining 2:1 dilution ratio. The substrate during application of primer to be in SSD condition. Providing & Applying microfiber reinforced acrylic based flexible waterproofing coating Dr. Fixit Newcoat of M/s Pidilite Industries Ltd having properties - Elongation at Break, 80 %, tensile Strength, 1.2 n/mm2, adhesion Strength, 1 n/mm2. in 1 coat. Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.

Providing 10mm thick plaster in CM (1:4) mixed with 3% integral water proofing compound over roof top surface finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid seperately

M&L for applying evenly & priming with oil bound bituminius primer at 0.4Ltr per sqm for water proofing treatment

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick rienforced with polyster non wove fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application complete all as specified.

M&L for Surface Preparation, Cleaning the surface, removing the laitance, greese, old paints, contaminants, moss etc. with wire brush / high preesure jet. Damaged or loose plaster to be replaced & repaired with polymer modified cement-sand mortar with Dr. Fixit Pidicrete URP. Small cracks upto 5mm needs to be repaired with crack filling material Dr. Fixit Crack X and the cracks above 5mm shall be repaired by polymer modified mortar with Pidicrete URP. Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately.

Supply only water proofing compound

M&L rendering 15 mm thick in CM 1:6 on concrete solid block wall internal surface finished even and smooth without using extra cement.

M&L Preparing new plastered wall surfaces and applying two coat of oil bound distemper over primer on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall

M&L for removing the spalled concrete upto the sound core level and clean reinforcement with wire brush to remove loose scales, cleaning of the surface with wire brush and plenty of water so as to remove the loose particles, dust, laitance etc, remove the rust by using rust remover of approved make. Apply passivator coat using zinc primer of approved make on reinforcement bars. Apply bond coat using "Epoxy bonding agent" on entire surface, when bond coat becomes tacky apply repair mortar (mortar to be prepared by adding 20% Dr. Fixit Pidicrete MPB or equivalent to 1:3 cement sand mortar) at a thickness upto 15mm and subsequently built up the required thickness in subsequent layers of 15mm and finishing the final layer even and smooth as per manufacturers instruction and as directed. Make : M/s Pidilite Industries Ltd or Equivalent in M/S Krishna Conchem Products/ STP Ltd. Note- Universal polymerised repairs mortars single pack like pagel U40 or Dr fixit micro concrete may also be used

Preparation of new plastered surfaces of ceiling and applying two coats of OBD with suitable primer after applying 3mm thick wall care putty on ceiling

pk janardhanan

M/s J.D. DESAI

SHIVRAJ CONSTRUCTIONS

Tara Construction

S. M. Enterprises

M/s RAJ CONSTRUCTION

M/S G.N.POWAR

M/S jvsr constructions