Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.0 CrAccepted-Finance PLOT NO 54 UDYOG KENDRA II ECOTECH III GREATER NOIDA | GREATER NOIDA | GAUTAM BUDH NAGAR | UTTAR PRADESH | ₹12.0 Cr | 1 | Accepted-Finance 1 |
| 2 | 2₹12.2 Cr+₹11.8 L (0.98%)Accepted-Finance | ₹12.2 Cr+₹11.8 L (0.98%) | 2 | Accepted-Finance 2 |
| 3 | 3₹13.1 Cr+₹1.0 Cr (8.46%)Rejected-Finance | ₹13.1 Cr+₹1.0 Cr (8.46%) | 3 | Rejected-Finance 3 |
Tender Value
Refer Docs
EMD Value
₹30 L
Closing Date
24 Mar 2025, 12:00 pmClosed
SE BSRO PWD BSR
SE BSRO PWD BSR
Widening and strengthening work of Bhojpur Pilakhua Dhaulana Road (O.D.R.) with Paved Shoulder in 2 Lane under Industry Logistic Park Scheme in Hapur district during Financial Year 2024-25
2025_CEMRT_1016316_1
1497/96M/BSR CIRCLE/2024-25 Dated 17.02.2025
Open Tender
Civil Works - Roads
Item Rate
365 days
HAPUR
-
2 documents required · 2 mandatory
₹2,714
₹30 L
18 Oct 2025
11 Mar 2025
24 Mar 2025
11 Mar 2025
24 Mar 2025
11 Mar 2025
Amount
Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Construction of embankment with approved materials deposited at site within 1.0 km from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Construction of embankment with approved material obtained from borrow pits with all lifts and leads 1.0 km, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Construction of granular sub-base by providing close graded material By Mix in place Mathod within leead 1.0 km, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification Laying Using Grader including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer @ 0.70 kg/sqm using mechanical means. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing and laying Dense Graded Bituminous Macadam (Grading - I) with with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.0% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing and laying Dense Graded Bituminous Macadam (Grading - II) with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing and applying tack coat with bitumen V-10 using bitumen pressure distributor @ 0.25 kg/sqm on the prepared bituminous surface cleaned with mechanical broom. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing and laying bituminous concrete Grading 2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.507 complete in all respects as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Clause 1501 SI No. 20.12 as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per MORTH specifications. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Excavation for roadwork in Marshy Soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for the proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. SI. No.255 as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Dimantling brick work or stone work in lime or cement mortar and including stacking ofmaterials as directed be the Er-incharge within a distance of 60 meter SI.No.692 as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M15 as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M20 using batching plant transit mixer & manual placing as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Proiding & Laying RCC Hume Pipe NP-3 (S&S type) ISI Mark/prestressed concrete pipe for culverts on first class bedding of granular material including fixing of collar joint with juit & cement mortar 1:2 excluding excavation, protection works, bakfilling, concrete & masonry works in head walls and perapets etc. required for proper completion of the work. 1000mm dia. as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering as per drawing & Technical Specifications as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc 5th KM Stone as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc KM Stone as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc HM Stone as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.
Routine Maintenance of road for 05 years after the completion of work vide GO No. 17/2024 SA-113/23-1- 2024-23-1099/113/2023 Dated 16.01.2024 & latter No.36890C/RMC/Mool-23-24, Date 17.02.2024 of ENC PWD, Lucknow Rate Excluding Cost of G.S.T. 1st year Maintenance Charges @ 0.00% of Total of Amount item no (1 to 29)
2nd year Maintenance Charges @ 0.25% of Total of Amount item no (1 to 29)
3rd year Maintenance Charges @ 0.50% of Total of Amount item no (1 to 29)
4th year Maintenance Charges @ 0.75% of Total of Amount item no (1 to 29)
5th year Maintenance Charges @ 1.0% of Total of Amount item no (1 to 29)
GSR Infratech pvt ltd (BID ID -5072438)
M/S MAHESH CHAND CONTRACTOR (BID ID -5052581)
stage.html
html • 0.05 MB
technical_1831792.pdf
techsummary_1831792.pdf
finance_1831792.pdf
BOQ Comparative Chart
xlsx
finsummary_1831792.pdf
cancelled_1.pdf
pdf • 0.41 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.91 MB
Tendernotice_2.pdf
PDF • 2.65 MB
BOQ_1831792.xls
BOQ • 0.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .