Loading
Loading…
Loading…
Tender Value
₹70,000
EMD Value
₹3,500
Closing Date
28 Sept 2026, 6:55 pmDue tomorrow
EXECUTIVE ENGINEER REW BUDGAM
RDD Complex Budgam
Repairment of tube well near Asthan Sharief at Handjan Ward 1
2026_RDPR_325175_125
NIT_75_REW_Budgam_2026_27
Open Tender
Civil Works
Percentage
30 days
PARNEWA
Please refer Tender documents.
3 documents required · 3 mandatory
₹200
Yes
Executive Engineer REW Budgam
₹3,500
19 Sept 2026
19 Sept 2026
29 Sept 2026
19 Sept 2026
28 Sept 2026
19 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level. | 18 | Rm | 544.45 | ₹9,800.1 |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire & labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in- charge. 100 mm nominal size dia having minimum wall thickness 5.00 mm | 18 | Rm | 1,161.9 | ₹20,914.2 |
| 3 | Development to tube well in accordance with IS: 2800(part 1) and IS:11189 to establish maximum rate of usable water yield without sand content ( beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete including required hire & labour charges of air compressor tools & accessories, etc. all, as
per direction of Engineer-in-charge. | 18 | Rm | 872.75 | ₹15,709.5 |
| 4 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe removable as per requirement all complete for bore well of :100 mm dia | 1 | No. | 189.65 | ₹189.65 |
| 5 | Providing and fixing M.S clamp of required dia to the top of casing/
housing pipe of tube well as per IS:2800 (part 1), including necessary bolts & nuts of required size complete: 100 mm clamp | 1 | No. | 1,968.1 | ₹1,968.1 |
| 6 | Providing and fixing bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800(part 1) | 1 | No. | 231 | ₹231 |
| 7 | Providing and installation of motor pump set 1.5 HP, including all necessary items complete job. | 1 | No. | 20,000 | ₹20,000 |
| 8 | Add Provision for CIB<Photographs and painting for design of SBM Logo as directed by Engineer incharge. | 1 | No. | 1,187.45 | ₹1,187.45 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.12 MB
BOQ_1098259.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .