NIT NO. 231/Durg(Balod)/2026

N.I.T. Schedule For M.O.W. of Non Residential Building Under Balod Division Balod

Rate:- As per SOR of Builing in forced from 1-01-2015 with upto date amendments PAC Rs. 25.00 Lacs

S.No. Item No. Item Qty. Unit Rate Amount

1 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.In all types of soils. 60.00 Cum 185.00 11100

2 1.1.4 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In hard rocks where blasting in prohibited. 30.00 Cum 798.00 23940

3 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 75.00 Cum 371.00 27825

4 1.19 Providing filling and compacting local earth (from approved source pit) in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 9.00 Cum 242.00 2178

5 2.1.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 20.00 Sqm 139.00 2780

6 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 20.00 Sqm 297.00 5940

7 2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes 35.00 Sqm 356.00 12460

8 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 35.00 Sqm 235.00 8225

9 2.1.8 Beams, lintels, cantilevers & walls 25.00 Sqm 202.00 5050

10 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings 5.00 Sqm 230.00 1150

11 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 60.00 Cum 2970.00 178200

12 3.1.4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 24.00 Cum 3552.00 85248

13 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 65.00 Cum 4163.00 270595

14 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415 5150.00 Kg 54.50 280675

15 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 15.00 Cum 4237.00 63555

16 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. 25.00 Kg 43.50 1088

17 3.16 Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and onsolidated and grouted with sand including finishing the top smooth. 15.00 Sqm 273.00 4095

18 3.2 Providing and fixing aluminium strip 1.60 mm thick on expansion joints with iron screws as per design to match the colour, shade of wall treatment . 15.00 Sqm 1397.00 20955

19 3.21 Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 5.00 Sqm 491.00 2455

20 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 25.00 cum 3263.00 81575

21 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 65.00 cum 121.00 7865

22 7.10.2 Half brick thick brick masonry with modular well-burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 20.00 Sqm 417.00 8340

23 8.11.2 Providing and fixing glass panes in glazed or paneled and glazed shutters of doors and window, clearstory windows etc (Only area of glass panes to be measured). 5mm thick 20.00 Sqm 502.00 10040

24 8.14.3 Providing and fixing flush door shutters, core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering on one face and commercial ply veneering on the other face of the shutter with vertical grains, cross bands and face veneering excluding hinges. 30 mm. thick (single leaf) 25.00 Sqm 1514.00 37850

25 8.22.3 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 20.00 Sqm 1126.00 22520

26 8.23.2 Providing and fixing 35mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges. Bijasal, Haldu, Benteak, Khair 5.00 Sqm 1888.00 9440

27 8.45.1 Providing and fixing heavy duty stainless steel pipe for curtain/ cloth hanging with two stainless steel brackets in wooden pelmet or wardrobe or any other space including screws and or plastic rawl plugs etc. wherever necessary. With 20 mm dia pipe 20.00 Rm 165.00 3300

28 8.62.2 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 200x10mm 10.00 Each 231.00 2310

29 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm 10.00 Each 55.50 555

30 8.60.1 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 25.00 Each 475.00 11875

31 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 11.00 Sqm 2399.00 26389

32 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete. 5.00 Each 1450.00 7250

33 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 330.00 Kg 67.50 22275

34 9.22 Providing and fixing 3 mm fibre glass pane with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 28.00 Sqm 678.00 18984

35 9.38 Providing and fixing broken glass 100 mm high in spacing not more than 40 mm both ways and laid in 50 mm thick (average) cement mortar 1:4 (1 cement : 4 coarse sand ) over compound walls, prapet walls and the like. 18.00 Sqm 268.00 4824

36 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 55.00 Kg 331.00 18205

37 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 55.00 Kg 338.00 18590

38 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. 105.00 Kg 27.00 2835

39 9.50.1 Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete With decorative lamination on one side and balancing lamination on other side. 10.00 Sqm 845.00 8450

40 8.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 25.00 Sqm 708.00 17700

41 8.10.3 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.63 mm thick sheet (weight 5.70 kg/m2) 40.00 Sqm 678.00 27120

42 10.5.3 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete. 0.63 mm thick sheet with zinc coating not less than 275gm/sqm 20.00 Sqm 445.00 8900

43 10.17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 29.00 Sqm 347.00 10063

44 10.18 Extra for asbestos cement corrugated/semi corrugated sheet roofing with vertical sheeting or sheeting to pitch exceeding 60 degree. 20.00 Sqm 51.00 1020

45 10.52.3 Providing and fixing false ceiling on existing frame work with ceiling tiles. 12 mm thick half random perorated tiles perforated area 13% 28.00 Sqm 479.00 13412

46 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 125.00 Sqm 87.00 10875

47 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 45.00 Sqm 91.50 4118

48 13.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 60.00 Sqm 107.00 6420

49 11.5 Neat Cement punning. 125.00 Sqm 33.00 4125

50 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. 40.00 Sqm 86.00 3440

51 12.3.1 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 40 mm thick 75.00 Sqm 222.00 16650

52 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm 70.00 Sqm 692.00 48440

53 12.36.2 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. Medium shade using approximately. 50% white cement and 50% ordinary cement. 25.50 Sqm 713.00 18182

54 12.65.1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 30.00 Sqm 436.00 13080

55 13.3.4 15 mm thick Marble work (machine cut, table rubbed & polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. Black Zebra. 35.00 Sqm 1808.00 63280

56 13.22.1 Mirror polishing on marble work/ Kota stone/ Granite work where ever required to give high gloss finish complete. On walls/ Floor 20.00 Sqm 184.00 3680

57 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade Putty with minimum 3 coats applied @ 5.4 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Birla wall care, Asian trucare, JK wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. 65.00 Sqm 86.00 5590.00

58 14.57 Providing and applying 2mm thick white cement based Acrylic grade putty with minimum 3 coats applied @4.0 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Asian trucare, Berger Happy walls Putty Birla Opus One pro smooth) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. (This Item to be use in heigher grade painting works Item No. 14.65) 65.00 Sqm 95.00 6175.00

59 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 (product such as Birla white primacoat/activcoat, Asian Trucare, Dulux interior cement primer, Opus Calista/110) with all tool tackles and labour etc. complete for the work. 125.00 Sqm 29.00 3625.00

60 14.60 Providing and applying of Acrylic primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 (Product such as Asian Spark/suprimo, J.K. Primer, Dulux Acrylic Primer) with all tools tackles and labour etc. complete for the work. 34.00 Sqm 37.00 1258.00

61 14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark, Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 125.00 Sqm 64.00 8000.00

62 14.63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @1.25 lit/10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type 1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze, Opus 130/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work (With 2 Year warranty). 60.00 Sqm 74.00 4440.00

63 14.64 Providing and applying Premium plastic emulsion paint with roller application minimum three coats applied @0.75 lit/10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type 1 Class D & C (Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium, Dulux Super Cover, Berger Easy Clean Nippon Breezee Metex Gold, Opus 1-50 Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(with 3 year Warranty) 50.00 Sqm 84.00 4200.00

64 14.65 Providing and applying Luxury plastic emulsion paint with roller application minimum three coats applied @1.25 lit/10Sqm up to final finish as per relevant Type -1 Class D, C, B & A (Glossy /Semi Glossy and Matt, Egg Shell or Satin finish) of required shade (Product such as Asian Royale Shyne, Dulux Velvet Touch, Berger Silk Luxury Emulsion, Nippon Impression Pearl, Opus Pure Elegance) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc, complete for the work. (with 4 Years Warranty) 45.00 Sqm 107.00 4815.00

65 14.66 Providing and applying on exterior surface with LITE ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit/10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D, C (Glossy /Semi Glossy finish) (Product such as Asian ACE Spark, Dulux Pomise exterior smart, Nerolac Littil Master, Berger Bison Lite, Nippon Superio ete) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty.) 45.00 Sqm 55.00 2475.00

66 14.67 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit/10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type 2 Class D, C (Glossy /Semi Glossy finish) (Product such as Asian Ace, Dulux Promise Exterior Berger Wall Masta, Nerolac Suraksha Plus Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools. tackles and labour etc. complete for the work (With 2 Year Warranty) 45.00 Sqm 70.00 3150.00

67 14.68 Providing and applying on exterior surface with PREMIUM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @1.40 lit/10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type 2 Class D, C (Glossy /Semi Glossy finish) (Product such as Asian Apex Dulux Weather Shield Prima E900, Berger Weathercoat Antidust, Nerolac Everlas Excel, Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. (With 3 Year Warranty.) 45.00 Sqm 84.00 3780.00

68 14.69 Providing and applying exterior surface with PREMIUM HEAVY DUTY Glossy or Matt Finish Exterior Emulsion paint of required shade to give protective and water proof finish minimum three coats applied @ 1.43 lit/10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D, C, B & A (Glossy/matt/Egg Shell finish )having high DFT and silicon aditive for elastomaric property (Product such as Asian Ultima Dulux Weathershield Maxx Berger Weathercoat All Guard Nerolac Excel Total, Nippon Durafresh Expert, Opus Tru Look) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. (With 4 Year Warranty) 65.00 Sqm 110.00 7150.00

69 14.97 Removing of paint on internal plastic emulsion/enamel paint by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete. 65.00 Sqm 8.00 520.00

70 14.98 Removing of paint on external surface exterior emulsion/cement paint by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete at all height. 50.00 Sqm 10.00 500.00

71 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 28.00 Cum 263.00 7364

72 16.13 Dismantling double Allahabad tiles or Manglore tiles or single wheel tiles including roof timber (excluding trusses), including stacking of serviceable material and disposal of unserviceable material within 50m lead. 25.00 Sqm 66.00 1650

73 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 28.00 Each 100.00 2800

74 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 23.00 Each 66.50 1530

75 16.43.1 Demolishing cement concrete including disposal of material within 50 metre lead. 1:4:8 or leaner mix 20.00 Cum 329.00 6580

76 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm 5.00 Each 2899.00 14495

77 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 10.00 Each 2882.00 28820

78 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 15.00 Each 1430.00 21450

79 18.17.5 White Oval or round size 550x400mm. 10.00 Each 1605.00 16050

80 19.2.1 Providing and fixing in concealed in wall 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including fixing the pipe with clamps at 1.00 m spacing, cutting chases and making good the same, testing of joints complete. PN - 16 Pipe, 16 mm OD 115.00 Rm 125.00 14375

81 19.2.3 Providing and fixing in concealed in wall 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including fixing the pipe with clamps at 1.00 m spacing, cutting chases and making good the same, testing of joints complete. PN - 16 Pipe, 25 mm OD 125.00 Rm 201.00 25125

82 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 5000.00 Litter 7.30 36500

83 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 10.00 Rm 162.00 1620

84 20.28.1 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 5.00 Each 3796.00 18980

85 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 5.00 Each 1709.00 8545

86 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames (32*3*3) 265.00 kg 73.50 19478

87 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 12.00 Sqm 3330.00 39960

88 10.24.1 Providing & fixing UV stabilized fibreglass reinforced plastic (FRP) sheet roofing upto any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without ai+C102r pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 10.24.1 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2"or 3"or 6") as specified. 75.00 Sqm 766.00 57450

89 10.26 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 10.26.2 2.00mm thick fibre glass sheet 75.00 Sqm 563.00 42225

90 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. 75.00 metre 133.00 9975

91 19.5.2 20 mm nominal outer dia .Pipes. 50.00 metre 167.00 8350

92 19.5.3 25 mm nominal outer dia .Pipes. 35.00 metre 213.00 7455

93 19.6.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 19.6.2 20 mm nominal outer dia pipes 65.00 metre 121.00 7865

94 19.6.3 19.6.3 25 mm nominal outer dia pipes 25.00 metre 165.00 4125

95 19.6.4 19.6.4 32 mm nominal outer dia pipes 25.00 metre 228.00 5700

96 12.79.1 Ammendment Providing and laying Double / Multi Charge (minimum 2.0mm thick layer) vitrified floor tiles with water absorption less than 0.5% and conforming to IS : 15622-2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 12.79.1 Size 600x600mm thickness 9 to 10 mm 50.00 sqm 1082.00 54100

97 9.61.1 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately) 9.61.1 3mm thick 35.00 sqm 1283.00 44905

98 9.44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. 35.00 Sqm 278.00 9730

99 9.42.3 Providing and fixing in position welded steel wire fabric to concrete/wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete 9.42.3 Aperture 50x50mm 5.00 Sqm 535.00 2675

100 9.51.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 9.51.1 With float glass panes of 4 mm thickness 25.00 Sqm 611.00 15275

101 9.51.3 With float glass panes of 6 mm thickness 10.00 Sqm 804.00 8040

102 9.45 Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block. 65.00 Kg 69.50 4518

103 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. 75.00 sqm 421.00 31575

104 7.9.2 Half brick thick (9cm) brick masonry with modular well burnt clay bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 10.00 sqm 435.00 4350

105 7.24 Providing and laying precast cement concrete block in masonry work with precast blocks having crushing strength 75 kg/sqcm in cement mortar 1:6(1 Cement :6 coarse sand ) .(To be used in boundary wall and plaster shall not be done.) 10.00 cum 4680.00 46800

106 8.35 Providing and fixing wall paneling frame made of commercial grade 12mm thick water proof ply strips 100mm wide at 600mm apart center to center vertically and horizontally with necessary screws, wooden plugs etc complete as required. 15.00 sqm 552.00 8280

107 8.36.1 Providing and fixing commercial grade water proof ply for wall paneling on wooden frame with necessary nails complete as required. 8.36.1 19mm 10.00 sqm 1231.00 12310

109 8.46 Providing and fixing decorative curtain rod assembly made of 32mm dia aluminium pipe covered with decorative finish plastic sleeve, 2 Nos or more 100x50x20mm size decorative wooden bracket, 2 Nos 100x50mm dia decorative wooden rod holding end plugs and 50mm dia wooden curtain rings 1 nos for every 100mm of length of curtain rod including PVC rawl plugs etc complete: 10.00 metre 263.00 2630

110 8.56 Providing and fixing stainless steel wire mesh of average width of aperture 1.56mm with wire of dia 0.45mm to doors, windows and clerestory windows including 19x12mm teak wood beading etc. complete. 10.00 Sqm 649.00 6490

111 8.58.4 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 125x70x4.00 mm (Ordinary Type) 20.00 each 153.00 3060

112 8.73 Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion & brass polished MS screws etc complete to suit the shutter thickness. 10.00 each 73.00 730

113 8.100.1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 8.100.1 300x20x6mm 10.00 each 53.50 535

114 8.102.1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 8.102.1 250 mm 15.00 each 34.50 518

115 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 15.00 sqm 658.00 9870

116 14.26 Providing and laying French sprit polish on old wood work after preparing the surface by washing all dust, dirt and greasiness with detergent, rubbing down smooth with sand papers, covering the knots or undulations by applying a coat of wood filler if required, cleaning the surface, applying 5 or more coats of French spirit polish till the surface gives high gloss. 40.00 sqm 59.50 2380

117 18.2.3 Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: 18.2.3 White Orissa pattern W.C. pan of size 580x440 mm 4.00 Each 1440.00 5760

118 18.7.1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. 18.7.1 White 5.00 Each 729.00 3645

119 18.10.1 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 18.10.1 30 CM length 10.00 Each 56.00 560

121 18.13.2 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: 18.13.2 Flat back type urinal of size 460x380x250mm 5.00 Each 1529.00 7645

122 18.16 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. 5.00 Each 1401.00 7005

123 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 7.00 Each 599.00 4193

124 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 18.76.1 75 mm dia pipe. 15.00 metre 182.00 2730

127 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 0.00

128 18.77.1.1 Tee/ Tee with door/ Bend 45°/ Bend 90° 18.77.1.1 75 mm 7.00 Each 113.00 791

131 18.77.2.1 Double "Y" with or without door 18.77.2.1 75 mm 5.00 Each 129.00 645

137 18.77.5 "P" trap 110mmx110mm long 10.00 Each 227.00 2270

138 18.77.6 Nahani trap 110x75mm 7.00 Each 90.50 634

139 18.77.7 Multi floor trap 110 7.00 Each 122.00 854

140 18.77.8 Plain reducing Tee 110x75mm 10.00 Each 129.00 1290

141 19.13.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: 19.13.1 Bib cock (250 grams) 7.00 Each 185.00 1295

143 19.13.3 Stop cock (350 grams) 15.00 Each 237.00 3555

144 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: 19.14.1 Bib cock (400 grams) 5.00 Each 382.00 1910

145 19.14.2 Long nose bib cock (500 grams) 5.00 Each 455.00 2275

146 19.14.3 Long body bib cock (500 grams) 5.00 Each 426.00 2130

147 19.14.4 Piller Cock (400 grams) 7.50 Each 398.00 2985

148 19.14.5 Two way bib cock (800 grams) 5.00 Each 708.00 3540

149 19.14.6 Stop cock (concealed) (600 grams) 5.00 Each 494.00 2470

150 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 5.00 Each 382.00 1910

151 19.14.8 Basin mixer pillar tap with spout (1000 grams) 2.00 Each 1248.00 2496

152 19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) 2.00 Each 1248.00 2496

153 19.14.10 Wall mixer with elegant knob (1400 grams) 3.00 Each 1787.00 5361

154 19.14.11 Hand shower set with flexible extension pipe 5.00 Each 754.00 3770

155 19.14.12 Bottle trap set with extension pipes 5.00 Each 473.00 2365

156 19.14.13 Toilet paper holder 5.00 Each 248.00 1240

157 19.14.14 Soap dish plate 5.00 Each 163.00 815

158 19.14.15 Shower rose (revolving type) (150mm) 5.00 Each 269.00 1345

159 19.14.16 Towel rail (600mm long x 20mm dia) 5.00 Each 338.00 1690

160 19.14.17 Towel ring (150 mm dia) 5.00 Each 254.00 1270

161 19.14.18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 3.00 Each 1764.00 5292

162 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5.00 Set 774.00 3870

163 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 5.00 Set 577.00 2885

164 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 10.00 Each 51.00 510

165 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 19.16.1 25 mm nominal bore 10.00 Each 436.00 4360

166 19.16.2 32 mm nominal bore. 7.00 Each 510.00 3570

167 19.18.1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 19.18.1 25 mm nominal bore 7.00 Each 413.00 2891

168 19.18.2 32 mm nominal bore 7.00 Each 556.00 3892

169 19.18.3 40 mm nominal bore 5.00 Each 688.00 3440

170 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 4.00 Each 754.00 3016

171 19.51 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4356.00 4356

172 20.2.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 20.2.1 100 mm diameter S.W. pipe 10.00 metre 357.00 3570

173 20.2.2 150 mm diameter S.W. pipe 15.00 metre 436.00 6540

Total Rs. 2499923

Say Rs.In Lacs 25.00

Sub Engineer Sub Divisional Officer P.W.D. Sub Division No. 1 Balod Executive Engineer P.W.D. Balod Division Balod