REPAIR/MAINT/PAINTING/CANNING OF STEEL FURNITURE AT GE GWALIOR

Amount

TABLE BED SIDE STEEL : FD/E6/MAP/15/TP :- S&F following components of table bed side including dismantling taking out carefully & replace old components of table complete all as shown on drg or specified table of same pattern or same size top/drawer of other pattern concerned with top/drawer as specified and directed by the Engineer-in-Charge.

Removal of old US top and S&F of new 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

All as per item No 1.01 here in but for sides of table bedside.

S&F new legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg.

S&F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg.

S&F new 6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg.

Replacement of Upper US drawer made of 18 mm thick exterior grade postforming pre-laminated particle board ISI Marked of reputed brand as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE provided with 6mm thick bottom of ISI marked BWR plywood.

Replacement of Lower US drawer made of 18 mm thick exterior grade postforming pre-laminated particle board ISI Marked of reputed brand as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE provided with 6mm thick bottom of ISI marked BWR plywood.

S&F new telescopic channel of best quality as approved.

S & F new rubber shoes 18mm square of high quality placed in position as shown in drg.

Welding work wherever required as directed by Engr-in-Charge and GE.

Painting to Table with one coat of synthetic enamel black paint over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth.

TABLE COMPUTER : FD/E6/MAP/03/TP :- S&F following components of table computer including dismantling taking out carefully & replace old components of table or same pattern table concerned with channel, top and drawer as availabe at site. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken table top of any description with S&F new table top of 18 mm thick exterior grade postforming pre-laminated particle board ISI Marked of reputed brand as per Drg.Colour/shade shall be approved by Engr-in-Charge/GE.

All as per srl item No. 2.01 here-in-before but bottom shelf of Table computer.

All as per srl item No. 2.01 here-in-before but vertical board on side of Table computer.

All as per srl item No. 2.01 here-in-before but keyboard tray of Table computer shall be exterior grade pre laminated partical board. And rest all as per Drg.

All as per srl item No. 2.01 here-in-before but drawer of Table computer as per Drg.

All as per srl item No. 2.01 here-in-before but pull out mouse tray of Table computer as per Drg.

Removing of old U/S telescopic channel of key board and S & F new stainless steel telescopic channel to Table computer.

S&F new knobs to Table computer.

S&F new handles to Table computer.

S&F new Nylon buffers to Table computer.

Welding work wherever required as directed by Engr-in-Charge and GE.

Painting to Table Computer with two coat of synthetic enamel black paint or other color paint as existing over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth.

TABLE DINING (ORS) (2100 X 900 X 760) : FD-165 (M) :- S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken table top of any description with S&F new table top of 18/19 mm thick Block board exterior grade ISI marked duly post affixed with 1 mm thicksunmica sheet in colour/shade as approved by Engr-in-Charge/GE.

Replacement of legs of table with S & F new legs made out of 25 mm square mild steel tube 16 Gauge.

Replacement of top frame long rail with S & F new Top frames long rail made out of 25 mm square mild steel tube, 16 Gauge.

Replacement of top frame short rail with S & F new Top frames short rail made out of 25 mm square mild steel tube, 16 Gauge.

Replacement of side stiffener with S & F new stiffener made out of 25 mm square mild steel tube, 16 Gauge.

Replacement of foot rest with S & F new foot rest made out of 25 mm square mild steel tube, 16 Gauge.

Welding work wherever required as directed by Engr-in-Charge and GE.

Replacement of rubber shoe with S & F new hard rubber shoe of superior quality.

Painting to Table dining with one coat of synthetic enamel black paint over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth.

TEAPOY VARANDHA : FD-35(M), FD-208, FD-255, FD-383 :- S & F following components of Teapoy Verandah including dismantling taking out carefully & replace old components of teapoy and simiar type of table varandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken table top of any description with S&F new table top of 18/19 mm thick exterior grade postforming prelaminated partical board. Colour/shade shall be approved by Engr-in-Charge/GE.

S & F new 25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

S & F new 25mmx3mm flat iron on top of legs of length 250mm welded to existing flat iron at top placed in position as shown in drg.

Replacement of legs of table with S & F new legs.

S&F PVC hard rubber shoes of best quality for Tea poy Verandha.

Welding work wherever required as directed by Engr-in-Charge and GE.

Painting to Teapoy Verandah with two coat of synthetic enamel black paint or as per existing colour or different color over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth furhter petty repair like screwing of existing plywood top etc.

TEAPOY VERANDAH : FD/E6/MAP/17 :- S & F following components of Teapoy Verandah including dismantling taking out carefully & replace old components of teapoy or similar type of trade pattern teapoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Removal of old US top and S&F of new 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

S & F new 18mm sq MS pipe for legs of teapoy welded to adjacent part as shown in drg.

S & F new 5mm dia MS bars at base tray with proper welding with frame of tray as shown in drg.

S&F PVC hard rubber shoes of best quality for Tea poy Verandha.

Welding work wherever required as directed by Engr-in-Charge and GE.

Painting to Teapoy Verandah with two coat of synthetic enamel black paint/as required match with existing color over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth including petty repair.

TABLE 900X900X760 WITHOUT DRAWERS : FD-1009 :- S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Removal of old US top and S&F of new 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Welding work wherever required as directed by Engr-in-Charge

Two Coats of Painting to table internally and externally with synthetic enamel paint of existing color over a coat of red oxide after preparation of surfaces even of same patter trad pattern table all as per direction of Engr-in-Charge

SIDE RACK W/TRAY 3 SPACES STEEL : FD-97(M), FD-408, FD-1023 :- S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

S & F new sides to rack three tiers steel made of 1mm thick MS sheet of size 355mmx710mm fixed in between vertical angle iron with nut and bolts as shown in drg.

S & F new shelves to rack six tiers steel made of 1mm thick MS sheet of size 840mmx355mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

Welding work wherever required as directed by Engr-in-Charge

Preparation of the old decorated/ painted surfaces of the rack with removing all dents, filling with putty and spray painting two coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) over a coat of red oxide as indicated on drgs to be painted material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

STEEL TABLE OFFICERS/CLERK OF SORTS : FD-84(M), FD-381, FD-1002, FD-1003, FD-1004 :- S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Removal of old US top and S&F of new 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

All as per item 8.01 here in but top of table clerk.

Replacement of drawer with S&F new table drawer made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc.

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks with double key fix with suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Replacement of standard PVC Handle with S&F new PVC handle.

Welding work wherever required as directed by Engr-in-Charge

Replacement of rubber shoe with S&F new hard rubber shoe of superior quality.

Painting to Table Office Officer with two coat of synthetic enamel paint over a coat of red oxide of approve shade over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and petty repair wherever required in table .

Painting to Table clerk as same as 8.10.

STEEL LOCKER OF SORTS : FD-127(M), FD-257, FD-1029, CWE/ BPL/53 :- S&F following components of locker including dismantling taking out carefully & replace old components of locker. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of legs with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf with S & F New shelf complete all as shown on drg, specified and directed .

Replacement with S&F new C.P. conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .

Chromium plated safety type hasp & staples

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Replacement of hinges of steel locker with S&F new hinges complete all as shown on drg, specified and directed.

Welding work wherever required as directed by Engr-in-Charge

Painting to locker with two coat of synthetic enamel paint of approve shade over/existing color of locker a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth including petty repair wherever required.

ALMIRAH STEEL LARGE 1/2 HANGING 1/2 SHELVING : FD-114(M), FD-1033, FD/E6/MAP/18 :- S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large

Replacement of shelf of almirah with S&F new shelf made out of 1.00 mm thick MS sheet complete fitting with nut & washer all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of legs of steel almirah large with S&F new leg.

Replacement of hinges of steel almirah large with S&F new hinges complete all as shown on drg, specified and directed.

Welding work wherever required as directed by Engr-in-Charge

Painting to almirah with two coat of synthetic enamel paint of approve shade over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and petty repair wherever reqired and as directed by Engr-in-Charge.

STEEL ALMIRAH LARGE : FD-67(M), FD-351, FD-1031 :- S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large

Replacement of legs of steel almirah large with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Replacement of hinges of steel almirah large with S&F new hinges complete all as shown on drg, specified and directed.

Welding work wherever required as directed by Engr-in-Charge

Painting to almirah (internally & externally) with two coat of synthetic enamel paint of approve shade over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth.

STEEL ALMIRAH MED : FD-243 :- S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah medium.

Replacement of legs of steel almirah medium with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Cleats (New cleats must be made of 2mm thick MS sheet)

Welding work wherever required as directed by Engr-in-Charge

Painting to almirah (internally & externally) with with two coat of synthetic enamel paint of approve shade over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth including petty repair wherever required.

CHAIR WRITING OFFICERS : FD/E6/MAP/12/Trade Pattern :- S & F following components of chair including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Removing U/S damaged Seat & back of Chair writing or same pattern chair or resembling chair which has polyurethane foam with fabric and plywood even be size very wih MAP pattern. S & F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Removing old U/S arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed.

Taking out U/S /broken frame and S&F new frame as per drg duly painted as per drg and as directed by Engr-in-Charge.

Welding work wherever required as directed by Engr-in-Charge

Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.

Painting to chair with two coat of synthetic enamel black paint over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth.

CHAIR VERANDAH:- FD-19, FD-256, FD-359, FD/MAP-II/06 :- S & F following components of chair including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and back of chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg.

Removing the existing U/S/broken PVC seat and back from the chair verandah MAP(JCO/ORs), S & F new PVC seat and back 4mm thick to the chair verandah MAP (JCO/ORs) after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply.

Replacement of legs of chair with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed.

Welding work wherever required as directed by Engr-in-Charge

Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.

Painting to chair with two coat of synthetic enamel white paint over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth.

TABLE 900X600X760MM WITH DRAWERS : FD-1008 :- S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Removal of old US top and S&F of new 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown as specified & as directed.

Lock all as per drg.

Shoes all as per drg.

Welding work wherever required as directed by Engr-in-Charge

Two Coats of Painting to table internally and externally with synthetic enamel paint of existing color after preparation of surfaces over a coat of red oxide to give new look.

TABLE 3'X 2' STEEL WITH OUT DRAWER : FD-1007 :- S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Removal of old US top and S&F of new 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Continuous Gas welding as required per 10 CM.

Preparation of old painted steel surface by removing all dents filling with putty and painting with two coat of olive green synthetic enamel paint complete over a coat of red oxide including petty repair, all as specified and directed by Engr-in-Charge

BOOK CASE STEEL : FD-90(M), FD-1028, FD-1047 :- S & F following components of book case including dismantling taking out carefully & replace old components of book case. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

New Shelf as per drg

Removing of U/S lock and S&F new lock of existing pattern with two keys.

CP Handle as per drg

back as per drg

Sides as per drg

Top as per drg

Bottom as per drg

Shutter as per drg.

Repair/adjustment to existing shelf including welding as per drg

Taking out U/S glass pane from shutter and S&F new 4mm pane glasses keeping the shutter freely swinging up and rolled in all as directed.

Welding work wherever required as directed by Engr-in-Charge.

Preparation of the old decorated/ painted surfaces of the book case with removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

RACK STEEL : FD-106(M), FD-1039 :- S & F following components of rack including dismantling taking out carefully & replace old components of rack. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

S&F new shelves to rack of 1mm thick MS sheet fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

Welding work wherever required as directed by Engr-in-Charge.

Preparation of the old decorated/ painted surfaces of the rack with removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

CHAIR SCHOOL WITH HARD BOARD : FD/E6/MAP/05 :- S & F following components of chair including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

One piece seat and back as per drg.

18 mm thick made of MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/ shade as approved by Engr-in-Charge/GE with 2 mm thick PVC edging shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete top openable with PVC edging (Hinged on RHS) screwed to 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame as per drg.

S & F new MS bars at base tray with proper welding with frame of tray as shown in drg.

S & F new shoes of high quality placed in position as shown in drg.

Welding work wherever required as directed by Engr-in-Charge.

Two coat of painting over a coat of red oxide after preparation ie derusting scratching rubbing with sand paper of electrical equipment and petty repair of complete chair apart from above and as directed by Engr-in-Charge.

RACK SIX TIERS STEEL : FD-106(M), FD-129(M), FD-1038 :- S & F following components of rack including dismantling taking out carefully & replace old components of rack. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

S & F new shelves to rack made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

Welding work wherever required as directed by Engr-in-Charge.

Preparation of the old decorated/ painted surfaces of the rack with removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

COMPOSITE OFFICE TABLES WITH VEENEERED PARTICLE BOARD OF SIZES (1500 X 900 X 750MM), (1200 X 600 X 750MM) ,(1350 X 750 X 750MM) : TP :- S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Dismantling, taking out carefully & replacement of old existing broken table top of Table 1500 x 900 x 750mm of any decription & replacement of the same with S&F new table top of 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

Dismantling, taking out carefully & replacement of old existing broken table top of Table 1200 x 600 x 750mm of any decription & replacement of the same with S&F new table top of 118 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

Dismantling, taking out carefully & replacement of old existing broken table top of Table 1350 x 750 x 750mm of any decription & replacement of the same with S&F new table top of 18 mm thick exterior grade postforming pre-laminated partical board as per Drg. Colour/shade shall be approved by Engr-in-Charge/GE.

Replacement of drawer with S&F new table drawer made out of 20 Gauge PBI sheet made to shape as well as channel where drawer run smmothly without any obstruction, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc. Complete as approved and all as shown on drgs.

Replacement of Lock with S&F new Lock with Duplicate Key, complete as approved and all as shown on drgs.

Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Replacement of rubber shoe with S&F new hard rubber shoe of superior quality complete as approved and all as shown on drgs.

Welding work wherever required as directed by Engr-in-Charge.

Preparation of existing decorated surfaces of the table after repairs with removing all dents, filling with putty and Spray painting one coat of synthetic enamel paint with 1st grade quality of paint (External & Internal) as indicated on drgs to be painted complete all as specified and all petty repair wherever required and directed by Engineer-in-Charge, material and labour complete, colour shade as approved by GE.

STEEL ALMIRAH SMALL : FD-67(M, FD-350, FD-1032 :- S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah medium.

Replacement of legs of steel almirah medium with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed.

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Cleats ( New cleats must be made of 2mm thick MS sheet)

Replacement of hinges of almirah with S&F new hinges complete all as shown on drg, specified and directed.

Welding work wherever required as directed by Engr-in-Charge.

Painting to almirah (internally & externally) with two coat of synthetic enamel paint of approve shade over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth incuding all petty reqair whereever required.

M/S PRAKASH RAIKWAR TRADERS & CO. (BID ID -3446066)

MISHON TRADING CORPORATION (BID ID -3438960)

KHAZAN SINGH SAWHNEY (BID ID -3439259)

M/S NEHAL ENTERPRISES (BID ID -3445754)

M/s Raghav Traders (BID ID -3440503)

M/s Bansal Brothers and Co. (BID ID -3436860)

M/s. Ravi and brothers (BID ID -3439913)

BHADORIYA AND BROTHERS (BID ID -3445510)