additional RMU for 240 flats

Amount

Supplying of 240RMU

Earthwork excavation in sand silt or other loose soil wet sand or silt, light black cotton, sandy loam soil and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessry as directed by the Departmental officers.

depth upto 0-2m

depth upto 2-3m

Refilling in foundation and basement and other similar works with excavated earth in layers of 150mm thickness well watered rammed and consolidated etc all complete complying with relevant standard specifications and as directed by the Departmental officers.

Supplying and filling in foundation and basement with STONE DUST in layers of 150 mm thickness well watered rammed and consolidated complying with watered rammed and consolidated complying with relevant standard specifications including cost of filling sand as directed by the Departmental officers.

Cement concrete 1:4:8 ( One of cement, four of sand and eight of hard broken stone jelly) for foundation and flooring using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

M30 Cement Concrete M 30 Design Mix using ordinary portland cement with water cement ratio not exceeding 0.45 including plasticizer etc for all RCC works namely TEE, ELL or rectangular beams, lingtel, parapet cum drops, waist and landing slab, canophy, circular column, fin projects, sunshades, window boxing slab, slab and other similar works using 20mm gauge down graded hard broken stone jelly excluding the cost and fabriation of reinforcement grills, shuttering and centering but including vibrating, laying, curing, finishing etc., complyibng with relevant standard specifications

Foundation

first floor column, slab, beam

Supply and erecting shuttering including necessary support for plane surface in foundation and basement for RCC raft slab, beams, column footings, plinth beams, steps etc., using suitable MS sheets of BG 10 stiffened with welded suitable MS angles of size 25 x 25 x 3mm for boardings supported by casurina props 10cm to 13cm dia spaced at suitable intervals etc., complete complying with standard specification and as directed.

Providing form work for foundation etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

For plane surfaces such as Rcc Roof slab, beams,Lintels,bet blocks,landing slab, portico slab, beeams etc.,

Providing form work IN SMALL QUANTITY etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

Brick work in CM 1:6 using fly ash bricks of size 9"x4-3/8"x2-3/4" (23x11x7cm)

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting the ceiling with two coats of approved Pale Milk White Plastic Emulsion paint over one coat of primer over Cement Plastered ceiling surface including cost of brushes, emulsion paints curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality of paint should be got approved by the Executive Engineer before use)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supply & Erection of CG LUCY/SCHNEIDER Make 11kv/630A/21KA 4Way (RRRL) Outdoor RMU Complete with 2No's 11KV / 630A On Load Isolator and 1 No. 11KV /200A SF6 Vacuum Circuit Breaker with New Version of compatibility Provision of SCADA Arrangement of Motorized Operating System, as Per TANGEDCO New Specification. Without FRTU & MODEM. EARTHING, ERECTION, INSTALATION TESTING & COMMISSINING

Earthing , erection, installation testing and commissioning Supplying and providing of RMU Base frame with suitable clamping arrangements etc.

Supplying and providing of Right angle HT Boot with suitable arrangements etc.,

Supplying and providing of HT&LT cable bush boot with suitable clamping arrangements etc.,

Supplying and providing 40mm dia solid rod CI earthing electrode and complete accessories as per the electrical standards with suitable clamping arrangements etc.,

Supply and Erection of Gl Earth Flat 50 x 6mm 100% micron Grade in open Fashion with necessary items,

Supply and Erection of Gl Earth Flat 25 x6mm 100% micron Grade in open Fashion with necessary items. .

Supply and Erection of Copper lightning arrester with suitable copper earthing outlet setc..

Supply and Erection of Cable ladder for HT Cables, Lum with Neutral insulators of 10ft & 12ft x 300mm wide and foot every 450 x 450mm by 25 x 6mm MS. Grade Flats.and etc...

Supply and Erection of Cable ladder for LT Cables, with Neutral insulators of 10ft & 12ft x 300mm wide and foot every 450 x 450mm by 25 x 6mm MS. Grade Supply and Erection of Cable ladder for LT Cables, with Neutral insulators of 10ft & 12ft x 300mm wide and foot every 450 x 450mm by 25 x 6mm MS. Grade Flats and etc. HT & LT CABLE TERMINATION KIT

Supplying of 11kv HT cable termination kits. MRT and O&M Approval

Liasoning charges towards ALL Drawing &technical approvals for 4WAY RMU

PRE-COMMISSIONING TESTING:Pre-Commissioning Testing charges for 3 WAY RMU

Required Painting work to identify the transformer and RMU body, Neutral,lightning arrestor.

Transport charges- Loading, un loading, crane & Vehicle.

SUB TOTAL

GANAPATHY ELECTRICALS

UNIVERSAL CIRCUITS