SPL REPAIR REPLACEMENT OF BER DG SET AT RAW WATER PUMP HOUSE BAIRAGARH AND SPL REPAIR TO CONVERSION OF OH LINE INTO UG CABLE AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Dismantiling of existing ACSR of any size or type from over head electric line carefully with out making any damage complete all as specified and directed.

Dismantiling of insulator of any type/size/grade from over head electric line complete all as specified and directed.

Dismantling of cross-arms of mild steel channel or angle sections etc complete all as specified and directed.

Dismantling of stay assembly any type, any size complete all as specified and directed.

Dismantling of UG cable with GI pipe any type, any size complete all as specified and directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for laying of underground cable and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc. 1.5 m in wide and n. exc. 1.5 m in depth for laying of underground cable pipe and getting out in soft disintegrated rock complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping, stays and similar work to match with existing surface complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed.

Removing of excavated soil to a distance n.exc. 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for clean dry sand, filling in trenches around under ground cable complete all as specified and directed. Note: Only punned thickness will be measured and paid.

S&L of un-reinforced precast concrete cable cover, class LV, type II flat size 300x180x40 mm as in cable protection complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 300 sqmm 3.5 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 240 sqmm 3.5 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 185 sqmm 3.5 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 150 sqmm 3.5 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 95 sqmm 3.5 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 70 sqmm 3.5 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 50 sqmm 3.5 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 25 sqmm 4 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 16 sqmm 4 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 4 core complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 2 core complete all as specified and directed.

S&F of galvanised steel pipe 80 mm bore, light grade, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable proction. Note: Excavation and Earth work shall be measured and paid separately.

All as per ser Item No 24.00 here-in-before but of size 50 mm bore.

All as per ser Item No 24.00 here-in-before but of size 40 mm bore.

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mm x 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with and including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1 (using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg) duly reinforced with mild steel round bars 6mm dia @ 150mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation and earth work including laying the GI pipe concealed in floor/wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion. NOTE: GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately.

S&F of pole box of size 300x200x100mm fabricated out of 2 mm thick mild steel sheet having 4 Nos aluminium busbar of suitable size with 1 No. MCB SP 6 Amps including proper locking arrangement with front openable hinged cover outdoor type weather proof suitable for mounting on steel /PCC pole including fixing MS clamp 02 Nos with nuts, bolts and washers including wheather proof PVC insulated flexible 1.5 sq mm 3 core copper conductor cable for connection of pole junction to street light complete all as specified and directed.

M&L for precast cable route indicator made out of cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) having 10cm square shape at top and 20cm square shape at bottom and total height of 90cm and grouted 35cm below ground level as per site requirement including embossing remark "LT 1100 V Cable" and also painting with two coats of synthetic enamel paint and necessary excavation and earth work in any type of soil complete all as specified and directed.

Supply, installation, testing and commissioning of manufacturer or OEM manufactured, static silent (Sound Proof Enclosure), Diesel Engine Driven Generating set capable of delivering 200 KVA, water cooled, 415 Volts (AC three phase, 4 wire system of supply) 50 Hz at power factor 0.8 minimum. The DG set shall consists of diesel engine coupled to a matching alternator through direct/ flexible coupling and mounted on common base frame and complete with control panel standarized by manufacturer, fuel tank with mounting arrangments and inlet, outlet oil arrangement exhaust pipe complete and suitable for conditions prevalent at Bhopal. Note:- The Genset should comply the Environment (Protection) Rules, 2013 related to Emission norms (latest update) and CPCB rules regarding type approval and confirmity of production (CoP) should be complied. CPCB-IV+ rules should be complied. (i) ENGINE (prime mover):- Diesel Engine 1500 RPM, direct injection, confirming to ISO 3046/BS 5514 or latest, water cooled naturally turbo charged capable of giving adequate BHP to drive alternator capable of delivering 200 KVA at outdoor atmospheric conditions at Bhopal, 24 Volts (as per manufacturer recommendations), electric battery start complete with fly wheel all standard fittings/ fixtures as per manufacturer and including suitable panel with techometer, lub oil temperature, pressure gauge and frequency meters and also including self starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and Engine protection system (Shut down, High water temperature, low lub oil, oil pressure over speed etc) fuel tank and first fill of lub oil and other consumables etc. (ii) ALTERNATOR:- Brushless AC alternator, 3 Phase, 415 Volt, 4 Wire, confirming to IS 13364 (I&II) rated for output of 200 KVA, minimum power factory 0.8, 1500 RPM, IP 23 Protection class enclosure, insulation class 'H' salient pole, revolving field, single bearing automatic voltage regulator coupled through direct/ flexible coupled through flexible coupling with and to match the above engine. (iii) BASE FRAME:- Made out of structural steel as per manufacturers recommended design/ specification.

(iv) ACOUSTIC ENCLOSURE:- Sheet metal fabricated scope type silent enclosure manufactured on CNC machines as per CPCB norms and power coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1M at 75% load under field condition and 70 DB at 3M from Gen set when DG set is working at full load along with testing conformance, labeling certification etc as laid down in GSR No. 371 (E) dt 17 May 2002. (v) DIESEL TANK: Diesel storage tank of capacity adequate for storage of diesel for 12 hours operation of Gen set. (vi) MISC: Tool kit, operation and maintenance catalogue, spare part list overhauling manuals guarantee card etc shall be provided as per manufacturer standard pratices. (vii) Supply, installation, testing, and commissioning of AMF (Automatic mains on failure) panel suitable for 200 KVA DG set, 415 volts, 03 Phase, 4 wire system factory made of suitable size (of CPRI Approved) made out of CRCA sheet 2.0 mm thich (IP-43 Protection), powder coated cubicle type floor mounted, indoor mounting, having copper bus- bar 450 Amps rating suitably insulated with PVC coloured tapes & shall be of same make as of DG set complete all as specified and directed.

M&L for PCC 1:1.5:3 type A-1 (using 20mm graded stone aggregate as in foundation, sub base for floors or similar work for gen set (of suitable size leaving at least 0.5 all around for ease of movement and 0.3 M height) and grouting pads as required at site complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 48555.00

PRADEEP TIWARI CONTRACTOR

RAJPATI CONSTRUCTION

M/S RAKESH TRADERS

HARNAM SINGH ANIL SINGH

Vee kay construction