Electrical Works

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End ).

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ).

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting.

Supply and fixing of 4' 20W Twin box type LED fitting with 2 nos 20w LED TUBE complete with Driver unit with 1.2 mtr conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with complete etc.

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb. (SD - 84)

Supply and fixing of 1' X 1' Indoor Commercial LED Luminaires Model - PLUTO model (SURFACE), Make - HAVELLS from ceiling with PVC unsheathed Copper leads from terminals to the fitting with tubes. (DATA -2 )

Supply and fixing of 2' X 2' Indoor Commercial LED 42 watts Luminaires (SURFACE), Make - HAVELLS from ceiling with PVC unsheathed Copper leads from terminals to the fitting with tubes (DATA - 3)

Supply and fixing of 2' X 2' Indoor Commercial LED 42 watts Luminaires (Recesses), Make - HAVELLS from 1.2 mtr GI Chain suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with complete etc. (DATA - 4)

Supply and fixing of 48W LED street light fitting with LED with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. (SD 457)

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300mm down rod with existing fan clamp .(SD 477)

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp. (SD 493)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the walll (SD-114)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan. (SD-120)

Supply and fixing of 450mm (18") sweep (Light duty) AC exhaust fan complete without provision of hole in the wall. (SD -118 )

Supply and fixing of light trap arrangements for 450mm (18") sweep exhaust fan.(SD - 123)

Supply and fixing of 1 no.16A two module socket , 1no. 16A one module switch, with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Higher End. (SD - 402)

Supply and fixing of 3 nos.6A two module socket , 3nos. 6A one module switch and 1 no.16A two module socket , 1no. 16A one module switch with modular cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-438)

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)(SD144)

Supply and fixing of 63A (3Phase +Neutral +Eath-Four pole) P-17 Tempera and socket DB's suitable for flush mounting with neutral link with provision for modular devices in flush with wall with earth connection. (Legrand make cat no.507864) For 3 phase machinery connections. (DATA- 5)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End(SD-523)

Supply and fixing of 12 way single pole and neutral MCB sheet steel Double door enclosure metal door distribution board with 1 No 32A DP MCB as incoming and 10Nos. 6A to 32A SPMCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCBs shall be of MDS / Hager make. (For Sub Lighting DB) (SD - 537)

Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one No 4 pole ELCB / RCD (totally 4 ways in one segment) (3x 4 ways in Each segment) and seperate provision for MCB / Isolators ( totally 12 Nos) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with Earth connection only.(DATA - 6)(For Main Lighting DB)

Supply and fixing of 7 segment 6 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one No 4 pole ELCB / RCD (totally 6 ways in one segment) (3x 6 ways in Each segment) and seperate provision for MCB / Isolators ( totally 18 Nos) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with Earth connection only. (SD - 634)(For 16 A Plug & 3 nos 6A Plug )

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door) with 1 No 160 A 4 P MCCB as incoming and 8 Nos 63A 3P MCB as outgoing with suitable cable end box on wall with Earth connection only. Higher End (DATA-7) For 3 Phase machiney (PDB)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour. (SD 57)

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour. (SD 59)

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour. (SD-63)

Supply and run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with suitable colour. (SD-358)

Supply and run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with suitable colour. (DATA- 8)

Supply, Erection, testing and commissioning of 250A capacity dust and vermin proof cubical Vertical type panel board made up of 16SWG CRCA sheet with supply and fixing of the following interior mounting switches with HRC fuse link arranged Horizontally with horizontal bus bar chamber and left and top side cable chamber. 1) 250A FP MCCB (I/C)-1No 2) 160A TPN MCCB (O/G) -16Nos and 63A TPN MCCB (O/G)-8Nos

With the bus bar size of 25 mm x 6 mm Cu for three phases and neutral and 25 mmx 3 mm copper strip all around the panel for the earth bus

The panel shall have powder coated painting of approved colours, approved by the department officers. The DANGER board / caution board shall be fixed in front side of panel board The panel shall be mounted on MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a masonry pedestal to be constructed with suitable foundation with bolt and nuts, such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level complete etc,.(DATA-9)

Supply and fixing of dust and vermin proof cubical type LTCT metering box of size 5ft x 21/2 ftx 1ft made of 16SWG sheet steel with door, lock and key arrangement with angle iron support comprising of three compartments one for 3 phase energy meter with base plate , bus bar arrangments with 4nos 11/2" x 1/4" insulated tinned Cu bus bar for 3phases and neutral with 3nos 250A/5A CT reputed make with sealing arrangements as instructed by TANGEDCO officials and another compartment with 3nos 300A fuse units and MS cable entry box with view glass with danger board, powder coated painting and 19/16 PVC insulated Cu wire for interconnection from meter to fuse unit. (MR)

Supply and Fixing of 250Amps TPN Switch Disconnector fuse units with HRC Fuses double break on suitable angle iron frame work with MS Cable entry boxes and with earth connection only. (SD-647)

Supply and Fixing of 125Amps 4 pole changeover Switch Disconnector fuse units with double break on suitable angle iron frame work with MS Cable entry boxes and with earth connection only. (SD-657 )

Supply and laying of 3 1/2 x 185 sq mm PVC armoured LTUG Alu.cable through suitable HDPE Pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good . (From TNEB Post to Metering point, Metering point to 250A Main switch, Main switch to 250A Panel board )[SD-675]

Supply and clarnping of 3 1/2 x 185 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-212 )

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with earth connection (SD -171)

Supply and providing cable end termination of 3-1/2 x185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-230 )

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour. ( SD - 465)

Supply and Laying of 4 x 6 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-665) (for street light)

Supply and fixing of brass cable gland for 4 x 6 sq.mm. PVC armoured LTUG cable with termination and earth connection (SD- 159 )

Supply and fixing of 25W LED gate light fitting (Havells Ruby LED Post Top) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. (DATA-10)

Earthing as per ISI specification with an earth electrode of 2.1 mtr class ‘B” GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mmx6mm with necessary funneling arrangement with necessary masonry work with 38 mm RCC cover slab for brick masonry works. (SD -221)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. (SD -372)

Please Enable Macros to View BoQ information