REP REPLACEMENT OF INTERNAL ELECTRIFICATION FLAME PROOF WIRING REPLACEMENT OF OLD FLAME PROOF LIGHT FITTINGS HIGHBAY FITTINGS, WELLGLASS FITTINGS BULKHEAD FITTINGS REP REWINDING OF CEILING FANS PEDESTAL FANSEXHAUST FANS AT NAVAL STN KARANJA

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : TPP 23-24 OF Ser No. 56 (b) (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Taking down carefully copper/aluminium point wiring( light, fan socket or power)/ flame proof wiring complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. remoing materials to store for keeping in safe custody or for taking credit for above items should be mae as per conditions seprately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLSH copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and including PVC CASING CAPPING(ISI marked) with all accessories including surface / concealed sheet steel terminal / CI box with 3 mm thick hylam / masonite sheet top cover including 1.5 sqmm size PVC insulated FRLSH unsheathed copper conductor multistranded cable for continuous earth conductor ( using green colour) to common earth and connecting to earth dolly, for One light /fan/bell point controlled by one switch 5 Amp, SP, one way 240 volts complete all as specified and directed.

All as per BOQ Serial item No 1.02 above but One 5 Amp, 3 Pin socket point on the same board complete all as specified and directed.

All as per BOQ Serial item No 1.02 above but One 5 Amp, 3 Pin socket point on independent board complete all as specified and directed.

All as per BOQ Serial item No 1.02 above, but using 2.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLSH copper conductor cable for phase & 1.5 sqmm PVC insulated unsheathed multistanderd copper conductor cable for earth continuity ( green colour) for one 3 pin socket outlet 15 Amp multi purpose independent controlled by 15 Amp switch, SP, one way, 240 Volts & socket, complete all as specified and directed.

All as per BOQ Serial item No 1.07 above, but using 4 sqmm (nominal area) for phase and 2.5 sqmm PVC multistanderd FRLSH copper conductor cable for earth continuity ( green colour) for one 15 Amp socket point controlled by 15 Amp switch, SP, one way, 240 Volts & socket, complete all as specified and directed.

All as per BOQ Serial item No 1.07 above but drawn through & including surface stove enameled steel conduit 20 mm dia with all accessories for One light /fan/ Buzzer point controlled by one switch 5 Amp complete all as specified and directed.

All as per BOQ Serial item No 1.07 above but One 5 Amp, 3 Pin socket point on the same board complete all as specified and directed.

All as per BOQ Serial item No 1.07 above but One 5 Amp 3 pin multi pin socket point on independent board complete all as specified and directed.

All as per BOQ Serial item No 1.07 above, but using 2.5 sqmm (nominal area) multistranded FRLSH copper conductor cable for phase & 1.5 sqmm size PVC insulated unsheathed multistanderd copper conductor cable for earth continuity (green colour) for one 3 pin socket outlet 15 Amp multi purpose controlled by 15 Amp switch, SP, one way, 240 Volts on independent board, complete all as specified and directed.

All as per BOQ Serial item No 1.07 above, but using 4 sqmm (nominal area) for phase and 2.5 sqmm PVC insulated, unsheathed multistanderd FRLSH copper conductor cable for earth continuity conductor ( green colour) drawn though in and including surface mounted stove steel conduit 20mm dia with all accessaries for one industrial plug complete all as specified and directed.

S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed.

S&F Buzzer, AC 230 Volts single pole complete all as specified and directed.

S&F Bell push, flush type, 5 Amp complete all as specified and directed.

S&F switch socket outlet, 2-in-1, 3 pin 6 A controlled by one switch complete all as specifed and directed.

S&F switch socket outlet 5-in-1, 15 A controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50 mm three terminals c complete all as specified and directed.

S&F EME rotary step fan regulator suitable for operation in 230 V, AC, 50 Hz complete all as specified and directed.

S&F in repairs Earth plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket 20A, 240 V with and including one MCB SP 20A, 240V complete all as specified and directed.

S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs SPN MCB 240 V 50 Hz 10 KA confirming to IS 8828 of rating 40 to 63 Amp complete all as specified and directed.

S&F in repairs TPN MCB 415 V 50 Hz 10 KA confirming to IS 8828 of rating 40-63 Amp complete all as specified and directed.

M&L for submain wiring with 2 runs of single core 6 sqmm PVC insultaed FRLSH, unsheathed multi stranded copper concuctor cable, 1100 Volts conforming to IS-694 1990 , drawn through and including PVC conduit 25 mm bore, including one run of 6 Sqmm PVC insulted FRLSH multistanded copper conductor cable, 1100 Volts grade conforming to IS -694, 1990 green colour for earth contuinity and connecting up to common earth dolly complete all as specified and directed. Note:- Two run of 6 Sqmm and one run PVC conduit measured as one running metre.

M&L for submain wiring with 4 runs of single core 6 sqmm PVC insultaed FRLSH, unsheathed multi stranded copper conductor cable, 1100 Volts grade conforming to IS-694 1990 , drawn through & including PVC conduit 25 mm bore, including one run of 6 Sqmm PVC insulted FRLSH multistanded copper conductor cable, 1100 Volts grade conforming to IS -694, 1990 green colour for earth continuity and connecting up to common earth dolly complete all as specified and directed. Note:- Four runs of 6 sqmm cable, one run PVC conduit will be measured as one running metre.

S&F in repairs MCB SPN distribution board sheet steel, phosphorised powder painted MCB DBs with busbar neutral link, earth bar and DIN rail conforming to IS, 4 way double door, 200 Amps rated bus bar, 230 volts, 50 HZ, AC complete all as specified and directed.

All as per BOQ Serial item No 1.25 above but 8 way double door, 200 Amps rated bus bar, complete all as specified and directed.

S&F in repairs MCB distribution board TPN, 4 ways, 415 Volts, 50 Hz, AC, double door made out of sheet metal phosphatised and painted with epoxy polyster based powder paints with 200 Amps rated bus bar and earth bar, complete all as specified and directed.

S&F in repairs MCCB 3 Pole, thermal release range100 Amps of breaking capacity 25 kA, 415 Volts, 50 Hz, Series complete all as specified and directed.

S&F in repairs MCCB 3 pole, thermal release range 125 Amps of breaking capacity 25 kA, 415 Volts, 50 Hz, Series complete all as specified and directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 100 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, Series complete all as specified and directed.

S&F in repairs MCCB 3 pole, thermal release range 200-250 Amps of breaking capacity 36 KA, 415 Volts, 50 Hz, DH Series complete all as specified and directed.

S&F in repairs LED 100 watt Highbay luminaire matellic body complete fixing arragement fixed on ceiling with anchor incuding hanging arrangement as directed including connecting using 3 core multistranded copper conductor complete all as specified and directed

S&F in repairs ROUND/SQUARE SHAPE 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED spot light with driver 15/12W, 230V complete all as specified and directed.

S&F in repairs pendenent 40 watt tube light type LED down lights with the suspension of 1.5 mtr is included (02 Nos) including fixing arrangement and conecting with ceiling rose complete all as specified and directed.

S&Fin repairs LED batten with 20W LED tube light in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 60 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,surge protection,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

S&F in repairs LED Luminaire 2 x 2 warm white/white as per site requirement, 35/36 watt, 220V AC recessed type with high efficiency PMMA disffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor case of suitable size complete all as specifed and directed.

M&L for checking & repairing of DBs/ meter panel board/Circuits/submain wiring and other connected work including rectification of faults as directed by JE/Engr-in-Charge. Note : each job consist of minimum 10 complaints from various locations to be rectified.

M&L for Point wiring with single core 1100 volts 1.5 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using color code drawn through and including stove steel conduit 19/20 mm dia fixed on wall with flame proof accessories complete all as specified in and including 1.5 sqmm PVC insulated PVC unsheathed copper conductor in cable for continuous earth continuty conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly for the following :-One light point/fanpoint controlled by one flame proof swicth complete all as specifed and directed.

All as per BOQ sl item No 1.40 above but for one 16AMP FLP outlet point for power independent by using 2.5 sqmm PVC insulated unsheathed copper cable complete all as specifed and directed.

All as per BOQ sl item No 1.40 above but for one 32/40 AMP FLP outlet point for power independent by using 4 sqmm PVC insulated unsheathed copper cable all as specified and as directed.

S&F FLP rotary switch single pole 10 Amps and fixing arrangement including taking down of existing FLP swtich complete all as specified and directed

S&F in repairs flame proof LED well glass hanging type 60w fitting complete all as specified and directed. Note:The rates includes taking down old light fitting and providing suitable necessary ladders /equipments for any height to taking down the items

S&F in repairs LED flame proof bulk head fitting 45w complete all as specified and directed

S&F in repairs MS reflector with sides bay and its accessories in side white and out side light grey epoxy powder coated suitable for flame proof fluoresent tube light fittings 2 x 40 W as per Cat No. FF/OA/1271 of M/S Sudhir or equivalent. Make and Model of M/S Baliga/ Bajaja / Flexpro complete all as per manufacturers instruction and as approved complete all as specifed and directed.

S&F in repairs flame proof weather proof switch socket and plug unit totally enclosed FLP- WP & dust proof equipment 2P + Earth 16 Amp 240 Volt complete all as specified and directed.

S&F in repairs flame proof weather proof switch socket and plug unit totally enclosed FLP- WP & dust proof equipment 4P + Earth 32 Amp 500 Volt complete all as specified and directed.

Taking down carefully Flame proof Tube light fitting, FLP Bulk head fitting, WELL GLASS/ non FLP tube light etc at any height for carrying out necessary repair works as directed and for replacement of defective parts and re-assembling and re-fixing in the same location, connecting testing complete all as specified and directed. Note :- LED tube rod required shall be measured & paid seperately. All other items are deemed included in the quoted unit rate

Supply only 20 w LED tube rod single side connection complete all as specifed and directed.

S&F in repairs LED batten suitable for LED tube light rod 18/20/22/24w, aluminum/MS housing alongwith fixing arrangements complete all as specified and directed.

S&F in repairs flame proof junction box in LM6 series 20mm dia entry 3 way / 4 way (as per sudhir cat part No JB/OA/104 or equivalent as approved) complete all as specifed and directed.

S&F of flame proof MS bend of size of 20 mm dia (as per sudhir cat part No BN/C/165 or equivalent as approved) complete all as specifed and directed.

S&F in repairs FLP FLEXIBLE metalic hose conduit 500 mm long of 19/20 mm dia fixed on directed place complete all as specified and directed.

S&F in repairs FLP FLEXIBLE metalic hose conduit 1000 mm long of 19/20 mm dia fixed on directed place complete all as specified and directed.

S&F in repairs LED batten with sensor 9/10W LED tube light, 2 feet having function of 25% brightness without motion and 100% brightness on detection of motion in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc as complete all as specifed and directed.

Taking down disconnecting and dismantling of ceiling fans of any sweep including fan blades, down rod, coupling, decorative caps, condenser housing, stator and rotor for inspection and replacement of defective parts including complete overhaulings/greasing reassembling and testing to achieve satisfactory perfomance ,refixing after repair complete all as specified and directed Note :- (a) Spare parts required shall be measured and paid separately as supply only under relevant items of this Schedule hereinafter.(b) Painting shall be measured & paid separately(c) Material required for overhauling such as grease, oil, etc shall deemed to be included in rate quoted.

All as per BOQ Serial item no 1.58 above but exhaust fan of size 300 mm sweep complete all as specifed and directed.

All as per BOQ Serial item no 1.58 above but wall mounted fan of size 300-450 mm sweep complete all as specifed and directed.

All as per BOQ Serial item no 1.58 above but pedestal fan of size 400-750 mm sweep complete all as specifed and directed.

Supply only Capacitor 2.5 mfd,complete all as specifed and directed.

Supply only Rubber bush for capacitor (as per sample) complete all as specifed and directed.

Supply only Split pin (as per sample) complete all as specifed and directed.

Supply only Rubber reel (as per sample) complete all as specifed and directed.

Supply only Shackle for ceiling fan with nut and bolts complete all as specifed and directed.

Supply only Ceiling fan blade 1200 mm (48") sweep, complete all as specifed and directed.

M&L for copper rewinding of ceiling fan of 1200/1400 mm sweep , with super enamelled copper wire of existing size and replacement of existing size of bearing/bush, testing including taking down, fixing at site complete all as specified and directed for following sizes:- NOTE-Rewinding of fans to be done at MES store yard by opening small rewding workshop,providing rewinding machine etc. Ceiling Fan 1200 mm sweep.

All as per BOQ Serial item no 1.68 above but Exhaust fan 300 - 450 mm complete all as specifed and directed.

All as per BOQ Serial item no 1.68 above but wall mounting fan 300 - 450 mm complete all as specifed and directed.

All as per BOQ Serial item no 1.68 above but pedestal fan 400-750 mm complete all as specifed and directed.

S&F in repairs remote of BLDC fan 26w complete all as specified and directed.

S&F in repairs switch piano flush button single pole one way, 6 Amp complete all as specified and directed

S&F in repair switch socket 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed

S&F in repairs switch bell push flush type 5 Amp complete all as specifed and directed.

S&F in repairs socket type EME fan 5 step regulator for ceiling fan of suitable size, complete all as specified and directed

S&F in repairs switch socket outlet 15 Amp, 5-in-1, controlled by one switch complete all as specified and directed

S&F in repairs PCB of BLDC fan 26W complete all as specified and directed.

S&F in repairs modular switch 1 module 6 amp one way complete all as specifed and directed.

S&F in repairs modular switch 1 module 16 amp one way complete all as specifed and directed.

S&F in repairs modular socket 2 module universal type 5/6 amp one way complete all as specifed and directed.

S&F in repairs modular socket 2 module universal type 15/16 amp one way complete all as specifed and directed.

S&F in repairs modular bell push 6A 1 module complete all as specified and directed.

S&F in repairs modular fan step type, 120w 2 module complete all as specified and directed.

S&F in repairs modular cover plates with frame up to 4 module as per site requirements complete all as specified and directed. NOTE-cover plates considered in this item only for the maintanance of switches of existing modular fitting qtrs/Offices.

S&F in repairs modular cover plates with frame 6 to 8 module as per site requirements complete all as specified and directed. NOTE-cover plates considered in this item only for the maintanance of switches of existing modular fitting qtrs/Offices

S&F in repairs modular metal flush box as per site requirements 4 to 8 modules complete all as specified and directed. NOTE-metal flush boxes considered in this item only for the maintanance of switches of existing modular fitting qtrs/Offices

S&F in repairs LED recess mounted 200x200x36mm luminarie 22w fitting alongwith square shape ring which mounted on surface of ceiling, under which LED recess light will be placed complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core saddle on wall to fix bldg security light/ flood light etc, complete all as specified and directed.

M.K Enterprises

R A Electric Co.

D.N.PATIL

ELECTRO ASSOCIATES