Supply and installation of decorative pole with 03 years AMC in I.A. Chakeri (Kanpur Nagar).

JOB NUMBER NAME OF WORK DEPARTMENT BANK NAME ACCOUNT NUMBER IFSC CODE BIDDER NAME E.M. AMOUNT E.M. UTR NUMBER. E.M. BANK NAME E.M. TRANSFER DATE (dd-mm-yyyy) TENDER FEE AMOUNT TENDER FEE UTR NUMBER TENDER FEE. TRANSFER DATE (dd-mm-yyyy) TENDER FEE BANK NAME

ED-IV (393) 08.12.2025 Supply and installation of decorative pole with 03 years AMC in I.A. Chakeri (Kanpur Nagar). UPSIDA State Bank of India 40550875159 SBIN0030173

NOTE: - 1. THE SCANNED COPY OF UTR RECEIPT WITH TRANSACTION I.D. IS TO BE ENCLOSED WITH E-TENDER DOCUMENT.

2. E-TENDER WILL BE REJECTED IF THE SCANNED COPY OF UTR RECEIPT NOT UPLOADED.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Office of The Senior Manager (E), ED IV UPSIDA , Kanpur.

Name of Work: Supply and Installation of Decorative Poles with 3 years AMC in I.A Chakeri (Kanpur Nagar).

Job No.:ED-IV (393) dated 08.12.2025

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

0_) Supply & Fixing of 4.0 Mtr. long Decorative Ornamental Pole duly PU (Poly Urethane) Painted made of high tensile M.S Pipe. The Top section of pole must have Cast Aluminium Embellishments through out the length. Base Plate size 350x350x12mm with PCD of 350mm. Foundation bolts set of M16x450m decorative pole made of Mild Steel with a total height of 4mtr above ground level with single arm bracket of ornamental decorative street light 60W and predefined laser cut pattern in in house laser machine in the top portion of the bracket of the pole as per design. Pole bottom base section shall be 220x220x1000mm, 2mm thickness column with three side predesigned laser cut and illumination. the surroundings in 20W with noticeable mode, top section pole of 90x3000x3mm & top bracket with laser cut pattern design one side of 1000mm to hold the street light of 60W as per shared drawing. The base plate of pole shall be of size 350x350x10mm. Provision for inside termination box with 4way connector & 01 No 06 A MCB for local isolation. light fixture shall be made of aluminium of size 600x580mm of street light distribution of 60W for area lighting. Light output of source is more than 110 Lm/W, CRI>80, SPD 4k, operating voltage 140-270V. Fitting is IP65, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. LED burning of 50,000 hours. The pole is coated with UV stabilized powder coat and cured in in-house powder coating machine. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all accessories. Foundation bolts; Min 04 Nos made of EN8 grade steel should be used only for erection. A lockable door of suitable size should be provided at bottom section for termination and connection with Backlite sheet and connector, MCB etc. on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P. Bottom dia-350mm up to 1200mm height from base plate. Top section dia-90mm. Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect with 05 years warrantee. Technical specification, make & profile as approved by engineer in charge.CAT AA BI01010001010000000000000515BI0100001113 Nos Excess(+) Full Conversion INR

0_) Suppy & Fixing of 05 Amp to 6.0 Amp SP MCB in m S Box complete in all respect (Cat B) as per UPPWD Sch item no. 1001 BI01010001010000000000000515BI0100001114 Nos Excess(+) Full Conversion INR

0_) Supply & laying of 63mm dia DWC HDPE pipe ISI marked along with all accesscries like socket, bend, couple etc. Confirming in IS 14930 part-II complete with fitting anf cutting jointing etc. througth horizental bering trenchless (75 cm below ground level) including excavation and refilling the trench but excluding and curhioning and proractive etc. complete in all respect. BI01010001010000000000000515BI0100001115 Mtr Excess(+) Full Conversion INR

0_) Supply and wiring of sub main with 03 nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I (20 mtr Each Pole ) BI01010001010000000000000515BI0100001116 Mtr Excess(+) Full Conversion INR

0_) Supply and laying of 10 sq.mm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie)..over a cushion of 75 mm. thick sand all around and protected. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.OEM must have it's own in house NABL accrediated Laboratory for testing procedure. All Material as per Technical specificition pre approved by Engineer in charge. (Cable laid in Ex. DWC Pipe) (as per UPPWD approved make list) BI01010001010000000000000515BI0100001117 Mtr Excess(+) Full Conversion INR

0_) Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN (as per UPPWD approved make list) BI01010001010000000000000515BI0100001118 Nos Excess(+) Full Conversion INR

0_) S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (c) 10 sq. mm BI01010001010000000000000515BI0100001119 Nos Excess(+) Full Conversion INR

0_) S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated, underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer- incharge as per UPPWD sch. no. 503 (b) 10 sq. mm 4 core BI01010001010000000000000515BI0100001120 Nos Excess(+) Full Conversion INR

0_) S/F of MS Earthing Rod (2500*20 mm) in verticaly ground level and connecting the pole with help of 6 SWG Wire including cost of all material men and T&P. BI01010001010000000000000515BI0100001121 Nos Excess(+) Full Conversion INR

0_) Supply and laying of 25 mm x3mm G.I Strip from earth electrode directly in ground as required aspect as per uppwd sch no-716 BI01010001010000000000000515BI0100001122 Mtr Excess(+) Full Conversion INR

0_) Supply, installation, testing and commissioning of Chemical Earthing for panel. BI01010001010000000000000515BI0100001123 Nos Excess(+) Full Conversion INR

0_) Supply & laying 50 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE pipe laid below ground level. . The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(l) BI01010001010000000000000515BI0100001124 Mtr. Excess(+) Full Conversion INR

0_) S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (m) 50 sq. mm 3.5 core BI01010001010000000000000515BI0100001125 Nos. Excess(+) Full Conversion INR

0_) S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (g) 50 sq. mm BI01010001010000000000000515BI0100001126 Nos. Excess(+) Full Conversion INR

0_) Supply & laying 35 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(k) (Polycab /KEI/ Havells/ Grandley/gloster Make) BI01010001010000000000000515BI0100001127 Mtr Excess(+) Full Conversion INR

0_) S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge as per UPPWD sch. no. 503 (L) 35 sq. mm 3.5 core BI01010001010000000000000515BI0100001128 Nos Excess(+) Full Conversion INR

0_) S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (f) 35 sq. mm BI01010001010000000000000515BI0100001129 Nos Excess(+) Full Conversion INR

0_) Supply & fixing of as per Design Suitable for Fixing Shackle Insulator , Made out of size 50x6 mm M.S.flat Including all bolts with nuts and washers etc. complete in all respect as per UPSIDC Sch. No. 13.1 BI01010001010000000000000515BI0100001130 Nos. Excess(+) Full Conversion INR

0_) Supply & fixing of 100 x 110 mm shackle insulator 100 x 80 mm pin insulator including GI volt spindle, nuts etc. as pre UPPWD Sch. No. 621 BI01010001010000000000000515BI0100001131 Nos. Excess(+) Full Conversion INR

0_) Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. BI01010001010000000000000515BI0100001132 Mtr. Excess(+) Full Conversion INR

0_) Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P required for proper complation of the work as directed as site by Engineer I/C as Per UPPWD sch No. 289 (Polycab /KEI/ Havells/ Grandley/gloster Make ) BI01010001010000000000000515BI0100001133 Mtr. Excess(+) Full Conversion INR

0_) Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint upto10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work.UPSIDC Sch. No.24.20.(A) BI01010001010000000000000515BI0100001134 Nos. Excess(+) Full Conversion INR

0_) Writing of letters (Pole no.) 2.5 cm upto 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material men and T&P complete in all respect rates BI01010001010000000000000515BI0100001135 Nos. Excess(+) Full Conversion INR

0_) Supply laying and Fixing 50 dia Gi pipe trench less Through manual Boggi including trenching 90 C.M. dccp and refilling etc.Ann-2 BI01010001010000000000000515BI0100001136 40 Mtr. Excess(+) Full Conversion INR

0_) Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint BI01010001010000000000000515BI0100001137 70 Each Excess(+) Full Conversion INR

0_) Supply and erection of factory fabricated and wiredmetal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter andvoltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming - 100 Amp. TPN-1 No, Outgoing - 32 Amp. TPN- 3 Nos. Cat. B. Cubicle Type BI01010001010000000000000515BI0100001138 1 Each Excess(+) Full Conversion INR

0_) Charges for maintenance ,proper watch and ward of entire electrical system of Street Light and High Mast Tower,cables,conductors,poles,panels etc and all other available material as per direction of engineer in charge for road lightng in IA to cover the general supervision for execution of work including dismantling and re fixing of all street light of UPSIDA during the period of AMC for 3 years (01 Helper+1 Electrician ) as per approved rate of UPSIDA BI01010001010000000000000515BI0100001139 Months Excess(+) Full Conversion INR

Total in Figures Total

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information