Construction of Data Centre and Dismantling and Reconstruction of Car Washing Ramp and Drain at High Court Complex, Srinagar.

Demolishing cement concrete manually/by mechanical means incl disposal of material as per directions of EIC

Earth work in excavation in foundation trenches or drains including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within from edge of cutting as per directions of EIC (25 mtr beyond 1 mtr from cutting edge)

Providing and laying Stone solling including compacting, watering and all carriages incl.(complete job)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages of material complete.

Centering and shuttering including strutting propping etc. removal of form work in Foundations, footings, bases of columns etc. for mass concrete. including all carriages of material complete.

Centering and shuttering including strutting propping etc. removal of form work in Lintel, beams, plinth beams, girders, bressumers and cantilevers including all carriages of material complete.

Centering and shuttering including strutting propping etc. removal of form work in Suspended floors, roofs, landings, balconies and access platforms including all carriages of material complete.

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in In cement mortar 1 cement: 6 fine sand mortar .

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and Laying of 40mm thick concrete flooring in rooms in M-15 (1:2:4) nominal mix (max size of aggregate 20mm) concrete.

Providing and applying average 12 mm thk cement plaster in single coat incement sand mortar 1:6 to all surfaces at all levels including surface preparation, staging, scaffolding as directed.

6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.d curing complete as per the directions of engineer-in-charge.2 mm thick

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)incld. Scaffolding

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): sencond class kail wood

Providing and Fixing of 40 x 5mm MS Hold Fast 40cm Long including fixing to frames embedded in cement concrete block in 1:3:6 Mic including all carraiges

Providing and fixing 30mm Thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickSecond class kail wood

Painting With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture .

Providing and fixing glazed 30mm Thick shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws second class kail wood

Providing and fixing of the following Hardware fittings.

Brass Handle 12" Long

Brass Handle 9" Long

Aldrop 12" Long

Tower Bolt 9" Long

Tower Bolt 6" Long

Handle 6" mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing colour coated CGI profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complet

Ridges plain (500 - 600mm)

Providing and fixing of planed eaves boarding 250x32 mm (nominal size) size of 2nd class kail wood incl cost of priming and painting

Providing and fixing of 10mm thick Ready made wooden Panneling in sofits including cost of KD Wood Frame Work 50 x 40mm Section @ 450mm c/c bothways including cost of screws, priming, painting etc in Softs, walls, gables, etc complete as per directions of engineer in charge.

Providing and laying cement concrete in retaining walls, retur walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and Laying of 50mm thick concrete flooring in M-15 (1:2:4) nominal mix (max size of aggregate 20mm) concrete.finished with a flooting coat of neat cement inc. cement slurry and curing complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. including all carriages of material complete.

Carriage of material by mechanical means. (15 Kmt Lead)

Aggregates

Bricks (20 Kmt Lead)

Providing and fixing in position PVC conduit pipes of superior quality, required diameter, including all fittings like bends, etc., for laying electric wiring, including carriage in Cieling complete job, as per the directions of the engineer incharge.

Supplying and fixing of Medium Class PVC conduit 25mm of standard make dully ISI Marked incl its accessories like bends ,cliffs ,saddles etc to be fixed on walls,incl refacing of walls complete job

Supplying and fixing of Medium Class PVC conduit 38mm of standard make dully ISI Marked incl its accessories like bends ,cliffs ,saddles etc to be fixed on walls,incl refacing of walls complete job

Providing and fixing Iron fan Junction of standard , of required size and approved make, complete job, as per the directions of the engineer incharge.

Providing and fixing MS deep concieled Junction boxes in slab, of required size and approved make, complete job, as per the directions of the engineer incharge.

Providing and fixing MS deep concieled Junction boxes in slab, of required size and approved make, complete job, as per the directions of the engineer incharge.