REPAIR TO CERTAIN INTERNAL ROADS OF VARIOUS UNITS UNDER AGE B/R-II AT GE KAMPTEE

Amount

Material and labour for repair to potholes any depth, not exc 1 sqm each including sweeping, with mechanical equipment, and making the surface free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc.by using pressure air, cutting around edges to at least 25mm in depth making good by applying tack coat at 5 kg per 10sqm, putting in premix as specified for thin bituminous carpet (2cm thick), well rammed and sealed with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix, rolled and compacted (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm using paving bitumen complete all as specified and as directed.

Material and labour for preparing black top surfaces surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with mechanical equipment to remove all loose dirt etc complete and applying evenly a priming/tack coat with bituminous primer over black top surface at 5Kg per 10 sqm premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and directed.

Material and labour for preparing black top surfaces surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with mechanical equipment to remove all loose dirt etc complete and applying evenly a priming/tack coat with bituminous primer over black top surface at 5Kg per 10 sqm using paving bitumen grade VG-10 on blacktop surface using mechanical spreyer and providing premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix and 2% cement filler, rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and directed. Note for item No 2 & 3: The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed to include for cement filler.

Material and labour for painting lines, dashes, arrows etc. by applying 2.5mm thick thermo plastic road marking compound of white/yellow of approved make and shade for road marking, not exc 10cm width on new/old surfaces, bituminous roads/ pavements or on cement concrete surfaces using HOT Processor Plant as per manufacturer's instructions complete all as specified and directed.

Supply and fix in repairs delineators ABS round body fitted with 2 Nos 50mm or 65mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 65mm duly powder coated anti rust and anti theft steel net and providing cement concrete as in foundation filling complete all as specified and directed.

Supply and fix in repairs solar road stud of size 125mm x 125mm x 20mm aluminium alloy & polycarbonate stud (Red/Yellow LEDs) 3x3 LEDs with shank in tough aluminium diecast body with stem as per MORTH / IRC specifications and manufacturer's instructions complete all as specified and directed.

Supply and fix in repairs ABS road colour cat eyes having dual direction (both sides) of size 100mm x 100mm x 18mm having body ABS filled with epoxy, quartz & sand with PMMA lens with load capacity greater than 50 Kg with visibility 800m etc complete all as specified and directed.

Demolition of cement concrete any description and n any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for providing 100mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in benching/ coping and the likes including weathering slightly round or chamfered angles and throating complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS:15658-2006, M-40 grade with grey cement and pigment to match the shade complete all as specified and directed.

Material and labour for 50mm thick sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

NOTE : SCHEDULE OF CREDIT (Amount on page No 33 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.)

M/S Darshan Singh Plaha (BID ID -3157799)

LAL AND SONS (BID ID -3161471)

chronicle enterprises (BID ID -3159500)

M/s KAMAL R AGRAWAL (BID ID -3171123)

KESHAV ENTERPRISES (BID ID -3158984)

Bidder Name

chronicle enterprises

M/S Darshan Singh Plaha

LAL AND SONS

M/s SHREE SAIBABA CONSTRUCTION

M/s KAMAL R AGRAWAL

KESHAV ENTERPRISES