REPAIRS TO RCC, WALL, JAFRI, SIGN BOARD, CHAIN LINK, FENCING, PATHWAY AND CERTIAN MISC WORKS UNDER AGE B/R CENTRAL AT COLABA MUMBAI.

Amount

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins all as specified and directed. Note:- each line wire to be measured as one length.

S&F in repairs Galvanised, concertina coil of 610 mm dia made of 0.5 mm thick 19 mm wide strip and 2.59 mm dia high tensile wire 125 Nos of clips having 50 Nos of circle and covering 6 running mtr and 5 clips per spiral using a centre core of high tensile wire around which a tape of rezor sharp barbes machine crimped all as specified and directed.

Dismantling posts or struts of any section including taking out embedded portion and making good distrubed ground all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete all as specified and directed.

M&L in repairs framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, flat etc. n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 all as specified and directed.

Fixing only in repairs chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire all as specified and directed.

Supply only chain link mild steel galvanized fencing, any type or size complete.

M&L MS bars 10 mm dia and over out to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

S&F in repairs mild steel work such as grill, gratings etc with the ends of bars shoulder and/ or riveted or formed into spikes framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work, rail & similar fixing with bolts where required conforming to grade E165 as per IS 15911: 2010 all as specified and directed.

M&L preparing old/new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and directed.

M&L preparing old/new steel and iron surfaces of any description not otherwise described not exc 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MoD land all as specified and directed.

M&L 15 mm thick ready mix plaster in one layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair all as specified and directed. NOTE : WPC will be measured and paid separately.

Supply only integrel water proofing compound all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MoD land all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed.

All as per item no 17 above but expect brick

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work all as specified and directed.

M&L in repairs Ornamental and intricate design framed work of mild steel conforming to Fe-290 (Gde E-165) as in doors or gates including cutting, bending in required shape & design, welding etc framed & hung including pintle hinges, stops. Hand made sliding bolts all as specified and directed.

M&L in repairs providing precast RCC jalli & pillars with cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) thickness of RCC jalli 35 mm (measured solid) including all mouldings & frame, set in cement mortar 1:4 to precast pillars grooves and including reinforcement of 4mm dia annealed wire @ 100 mm c/c spacing on both side alongwith pillars decorative round dome type on top of size 75 x 75 mm with reinforcement 4 mm dia annealed wire 4 Nos with stirrups 4 mm dia @ 150 mm c/c spacing and one number 8 mm dia TMT bar at centre including dismentling of RCC jalli and pillers all as specified and directed.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden or plain finished of brand name "Euro bound/ Alstrong/ Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed. Approved sample as kept in GE Office.

Dismantling stone slab and tiles of any description all as specified and directed.

M&L granite (of any type) tiles 18-20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing fixed on 10 mm thick plastering in CM 1:4 all as specified and directed.

Molding(Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing all as specified and directed.

Dismantling of floor tile hearth or wall tiling including cement mortar bedding and removing to store and removing rubbish off the premises outside MD land all as specified and directed.

M&L exterior wall tiles 6 to 8 mm thick, area 600X300mm each tiles, set & jointed in cement and pointed in coloured cement to match the shade of tile and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed. Make – Kajriya/Johnson (Endura) or equivalent as approved.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and and applying one coats of weather proof acrylic exterior paint (100% Acrylic) (Apex Ultima protek, Make : Asian Paints) through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE complete all as specified and directed.

M&L for complete removal of paint of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of weather proof acrylic exterior paint (100% Acrylic) (Apex Ultima protek, Make : Asian Paints) through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE all as specified and directed.

M&L for preparing new surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE all as specified and directed.

M&L in repairs stainless steel grade 304 (square/ round /rectangular) of suitable gauge as in gaurd bars / railing /frame work including all fixing arrangement including taking down of old of any type railing all as specified and directed.

S&F retroreflective sign board of size 1.56 x 0.92 m both side comprising of the following :- (a) Excavation in post holes each not exc 0.50 cum and getting out, returning, filling in and ramming earth of broken rubble mixed with earth around in layers not exc 25 cm thick watering and removing surplus soil to a distance not exc 50 mtrs and making good surface to match with existing. (b) PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in foundation of size 250 x 250 x 450 mm. (c) 0.56 mm thick aluminium sheet of size 1.56 m x 0.92 m framed with Stainless steel railing with horizontal and vertical pipe of 32 mm dia on ground in PCC. Height of board from ground level shall be 2.37 m. (d) Retroreflective sheeting as prescribed in (c) above on aluminium sheeting both side white or coloured having a smooth outer surface, retroreflective shall be of high intensity grade with encapsulated lence (the message, ledgends, letter, number etc.) and other shall be 100/150 mm size complete.

Retroreflective sign board of size 1.20 x 0.60 m both side comprising the following :- (a) Excavation in post holes each not exceedubg 0.50 cum and getting out, returning filling in and ramming earth of broken rubble mixed with earth around in layers not exceeding 25 cm thick watering and removing surplus soil to a distance not exceeding 50 mtrs and making good surface complete. (b) PCC 1:2:4 type A-1 using 20 mm graded stone aggregate as in foundation of size 250 x 250 x 450 mm complete. (c) 0.56 mm thick aluminium sheet of size 1.56 m x 0.92 m framed with Stainless steel railing with horizontal and vertical pipe of 32 mm dia on ground in PCC. Height of board from ground level shall be 2.37 m complete. (d) Retroreflective sheeting as prescribed in (c) above on aluminium sheeting both side white or coloured having a smooth outer surface, retroreflective shall be of high intensity grade with encapsulated lence (the message, ledgends, letter, number) and other shall be 100/150 mm size all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor & pavings n.exc 15 cm thickness (below or above GL) and removing debries out side MOD land all as specified and directed.

M&L hard core of broken stone or boulder of guage n.exc 63mm deposisted, spread and levelled in a layer n.exc 15 cm thick watered and well rammed to a true susrface all as specified and directed.

M&L for chequered cement concrete coloured tiles 25cm x 25cm x 25 mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry laid over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) in floor all as specified and directed.

M&L PCC 1:4:8 type D2 as in sub base to floor 75mm thick (using 40mm graded crushed stone aggregate) finished surfaces even and fair all as specified and directed.

M&L machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M- 40 grade with grey cement and pigment including 25 mm thick sand cushioning layer all as directed and specified

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M- 35 grade with grey cement and pigment including 25 mm thick sand cushioning layer all as directed and specified

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in PCC , kerb, mud stops rounded or chamfered for securing interlocking tiles all as specified and directed.

S&F in repairs precast PCC Kerb stone of size 60 cm x 30 cm x 15 cm joint in cement mortar (1:6 ) and struck flush including dismantling of old PCC kerb stone all as specified and directed.

M&L for painting lines, dashes, arrows, letters etc on road, pavement and the like exc 10 cm wide with road marking paint white, golden or yellow colour all as specified and directed.

M&L for preparing old painted brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of floor coat emulsion paint PLATINUM SERIES all as specified and directed. Make : INDICO / Equivalent

SN CONSTRUCTION

Panther Facilities

SB CONSTRUCTION

RUPESH CONSTRUCTION CO

SAHU AND SAHU CO.

GANGAJAL

HINDUSTAN BUILDERS

Vandan Enterprises

Bright Construction Co

SHRI SAI ENTERPRISES

Shetty Construction Co

Shivam Enterprises

David Construction Co.

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

Shetty Construction Co

SN CONSTRUCTION

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

Vandan Enterprises

David Construction Co.

Panther Facilities

Bright Construction Co

GANGAJAL

SB CONSTRUCTION

RUPESH CONSTRUCTION CO

Shivam Enterprises