SPECIAL REPAIR TO STN HQ OFFICE AND PROVISION OF CERTAIN MINOR AND REVENUE WORK AT INF SCHOOL UNDER GE MIS MHOW

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for shafts, wells, cespits, manholes, pier hold etc not exceeding 10 Sqm on plan and getting out in had/dense soil complete all as specified

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filing,sub base of floor etc complete all as specified

M&L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in strriups,spaces,nibs and binders including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified

Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete.

M&L for sand filling under floor including waterring and consolidaion complete all as specified

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified.

M&L for brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:4 as in half brick thick walls complete all as specified

M & L for for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finished surface of concrete complete all as specified.

M&L for reinforced cement concrete 1:1.5:3 type A1 using 20 mm graded stone aggregate as in beams, bands, cantilvers, bressummers, linters, chajjas, over 1.5m span complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified.

M&L for hardcore with broken stone of gauge n exc. 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

M & L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate for levelling course in floors complete all as specified.

M & L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces ,finished even and smooth without using extra cement complete all as specified

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface mixed with liquid water proofing compound @ 200 ml per bag, finished even and fair without using extra cement complete all as specified Note:- Liquid water proofing compound shall be measured paid separately

M&L for rendering 5mm thick in CM 1:4 on ceiling or concrete surfaces finished even and smooth without using extra cement complete all as specified

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F fabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partitions with one or more rebates sections of approved tint as required for partitions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified

S&F aluminium coloured power coated door shutters, aluminium section weighing minimum 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws,tower bolt and aldrop Bolt etc complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.

M&L for applying two coats of superior quality oil emulsion distember over a coat putty including preparation of surface complete all as specified Note:- Putty shall be measured and paid seperately under relevent item

M&L for preparation of new plastered surfaces of walls and applying two coats of Acrylic Smooth exterior paint of required shade (@ 1.67 litre /10 sqm) over a coat of primer(@ 2.20 kg/10 sqm) of same make base over a coat of putty all as specified Note:- Putty shall be measured and paid seperately under relevant item

M&L for preparation of new plaster surface of wall and applying 2mm thick cement base wall care putty in two coats (each coat not less than 1mm) over a coat of primer , surface finished even and smooth with sand paper complete all as specified

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified

All as per item no 29 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified

M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM 1:4 including polishing done by mechanical grinder and moulding edges complete all as specified

M&L for machine pressed rubber moulded coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over and including 25mm thick bedding layer of stone dust and joint filled with sand including locking of sides with PCC 1:3:6 type C1 complete all as specified

S& F Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part I complete all as specified

S& F Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part I complete all as specified

S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified

All as per item No 36 above but 20mm bore

S&F CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipe complete all as specified .Make:Plumber/Essco of jaguar(Economical Range)

S&F CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified .Make:Plumber/Essco of jaguar(Economical Range)and directed..

S&F fancy type chromium plated 15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified . Make :Plumber/Essco of jaguar (Economical Range)

S&F CP toilet paper holder

S&F vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified

S&F PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified .Make : Plumber/Essco of jaguar(Economical Range)

S&F health faucet with flexible pipe of one meter length including wall hook for EWC complete all as specified .Make- :Plumber/Essco of jaguar(Economical Range)

S & F vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed .

S&F Vitreous china urinal, Half stall type,white with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal complete all as specified

S&F PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified

S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified

S&F PVC waste pipe for urinal /wash basin / sink , 32mm bore 65cm long complete all as specified

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed ( Minimum weight 210 gms) complete all as specified

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified

S&F mild steel Hollow Section work in tubular trusses, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified

M&L for salt glazed stoneware drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested internal dia of pipe 150mm complete all as specified

M&L for RCC type 1:2:4 type B1 using 20 mm graded granite stone aggregate) as in precast cover slab for manholes and soak well cover slab etc set in cement mortar (1:4) etc with and including necessary form work all as specified . Note:- Reinforcement shall be measured & paid separately under relevant item.

M&L for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping including necesarry form works complete all as specified

S&F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid on wall / floor complete all as specified

S&F PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid on wall / floor complete all as specified

S&F PVC ( SWR) bend any radius bore of 110 mm bore

S&F PVC ( SWR) bend any radius bore of 75 mm bore

S&F PVC ( SWR) junction single (single T) 110 mm bore

S&F PVC ( SWR) junction single (single T) 75 mm bore

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F Anodised aluminium snap grid frame work of size 605mmx605mm for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F Exposed metal frame ceiling with 6mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified.Note:Frame work for ceiling shall be measured and paid separately under relevant item

M&L for cutting opening through brick wall built in cement mortar for doors,windows etc including providing , fixing and removing shoring cleaning and stacking bricks and removing rubbish off the premises not exceeding 50m

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified

M&L for vitrified light shade ceramic tiles 10 mm thick (square/ rectanglar ) area of each tile not exceding 0.36 sqm in floor/wall etc. set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including screeding bed 15 mm thick in CM 1:6 fcomplete all as specified

All as per item No 71 above but 10 mm thick in CM 1:4 on vertical surfaces such as skirting,dado etc complete

M&L for complete removel of existing treatment of walls and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty including primer complete all as specified

Taking down carefully existing aluminium partition wall and refixing the same in other location including all fixing arrangements and making good the old surface as per existing complete all as specified

S&F PVC prelam sheet wall /ceiling panelling of thickness min 5mm on inner frame work of 50mm wide strips of 5mm thick. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joints of two panel for aesthetic looks. The exact size of the panel and correspondingly of grid may vary depending on the size of wall. Optionally a strip of 5mm thick PVC sheet of width 75mm feathered at edges sahll be struct at the places where two panels jointed, using solvent complete all as specified and as directed

M&L Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work finished the surface even and fair complete all as specified

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n.exc. 1.5 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm n exc 4 Sqm each complete all as specified

S&F aluminium coloured powder coated window shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified

S&F aluminium coloured powder coated window / ventilator shutters, side hung type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws with anodised almn fittings such as peg stay, hinge type B1- 2 Nos suitable handle 1 No per shutter etc complete all as specified

S&F Aluminium Composite Panels (ACP) any colour of exterior edge for panelling of doors/ partition wall of Alucobond /Alstrong / Brand approved equivalent make in combination of solid / Metallic colours, including all necessary packing materials for complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface will be furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of ECCA/AAMA and conforming to the mechanical properties of panel as per detailed technical specifications.

S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed.

M&L for mild steel framed work such as grill s grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars and similar work conforming to Fe 290. Gde E 165 complete all as specified

E&M PORTION :

M&L for point wiring with FR LS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for the following

One light point / ceiling fan / exhaust fan controlled by one switch

One 5amps socket out let point controlled by one switch on same board with other switches.

One 5amps socket out let point on independent board controlled by one switch.

All as per item no-89 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 6 Amp 240 volt

S&F socket outlet flush type 5 pin, 6 amps, 230 volts

S&F switch piano flush button single pole one way 15 Amp 240 volt

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts

S&F ceiling rose surface bakelite three terminal

S&F integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or other equivalent in Wipro

S&F integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or equivalent in Wipro

S&F LED street light fittings 1x30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2

S&F double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified

S&F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified

S&F energy efficient exhaust fan of metal body 225/230 mm sweep Ventil Air -DSP green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windows including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection including making suitable size of hole into existing brick wall to fix fan base and making good the disturbed surfaces as per existing complete all as specified

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion including taking down/dismantling the existing complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc. complete all as specified

S&F in repairs Modular Switch flush type 6 Amps single pole, one way

S&F in repairs Modular Socket outlet, multi purpose, 2/3 Pin combined 6 Amps flush type

S&F in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket

S&F in repairs modular fan regulator step type, 2 module type complete

S&F in repairs LED ceiling light fittings 34/36 watt recess mounting type 2x2 luminaire, 6000k complete with driver duly connection wire etc complete all as specified Make :Jaguar Cat No. LULT10S036XC, Crompton Cat No. LCTLRN-36-FO-CDL, Bajaj Cat Pt No. BZRSQL 36W GZ1 WH or other equivalent in Havells Wipro.

M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified Note:- Two runs of 6 sqmm cable,one run of earth cable 6 sqmm and one run of PVC conduit shall be measured as one unit length

S&F in repairs flush mounting factory made Vertical TPN DB, IP-43 Protection -IK 08, with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for TP/FP 100-125 amps G Frame MCCB as incomer and SP/TP MCBs as out going 8 way complete all as specified

S &F in repairs MCCB FP 125 Amps 25 KA including connection with suitable size aluminium / copper lugs complete all as specified

S&F in repair Exhaust fan 300mm sweep, AC single phase 230 Volts, metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall to match with existing finish complete all as specified and directed Make : Havells Model: Ventil Air-DX white or other equivalent in /Bajaj/Crompton.

Taking down existing old unserviceable LT UG cable / service cable of any description and size complete all as specified and directed.

Supply and lay einforced precast concrete cable cover, class LV, type 1 flat , size 250mm x 150mm x 40mm

Supply and lay galvanised iron pipe 'light Grade' 50 mm dia in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified

Supply and layincluding testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches /ducts, on poles etc of size 3.5 core x 35 Sqmm complete all as specified

Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 750 mm x 750 mm x 500 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. . NOTE:- Quoted rateshall be inclusive of earthwork and PCC work

INCOMMING

(a) Copper strip busbar of 250 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos

(b) 4 pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 01 No.

(c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.

OUTGOING

(f)4 Pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -03 Nos

(g)Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150 mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core x 50 sq mm complete all as specified

Supply and lay old size sub class ‘B’ bricks, laid in trenches as cable covers complete.

Supply and lay galvanised iron pipe 'light Grade' 40 mm dia in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified

M/S UnitedConstruction

sunway associates