Renovation and upgradation of Ground floor of UILS building by providing steel work framing in class room, library with chequered plate and wooden planks flooring, plastering work including painting and white washing at Ava-Lodge chaura maidan in HP

Amount

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtrs. a) All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

20 mm cement plaster of mix : a) 1:4 (1 cement: 4 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix : a) 1:4 (1 cement: 4 fine sand)

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in paneling & walls lining i/c mitring at junctions , butt jointing and nails complete( Frame work for base to be measured & paid separately ) a) 12mm thick

25 mm wooden planking tounged and grooved in flooring fixing to wooden base frame with iron screws complete( wooden base frame to be paid separately) a) With 1st class deodar wood planks

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a) 0.63mm thick with zinc coating not less than 275 gm/ m²

2 mm thick PVC/ rubber tiles flooring plain, coloured corbed or mosaic or mottled finish laid with approved adhesive on sub floor complete (sub floor including damp proofing treatment to be measured separately for payment)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : a) 2nd class teak wood i) 50x 20 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. a) Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade a) One or more coats on old work

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : a) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). a) Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge (Note:- Butt hinges and necessary screws shall be paid separately) a) Second class teak wood a) 35 mm thick shutters

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: a) 100 X 10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : a) 125 mm

Providing and fixing fly proof stainless level steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. a) With 2nd class teak wood beading 62 X 19 mm

Renewing glass panes, with wooden fillets wherever necessary: a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm

RISHI KUMAR TUTANIEA (BID ID -554167)

OM PAL KASHYAP (BID ID -554140)

PRAKASH SHARMA (BID ID -552746)

MAUN SINGH (BID ID -554170)

AKASH SHARMA (BID ID -554325)

Rajesh Sharma (BID ID -553780)

SUDHEER THAKUR (BID ID -553511)