REPAIR / RECANNING / PAINTING / POLISHING OF STEEL / WOODEN FURNITURE AND MISC ARTICLES AT MH KAMPTEE, APS, NCC OTA, GRC, UNIT 371 AND OTHER UNITS UNDER GE KAMPTEE.

Amount

Material and labour for re-painting of mentioned below steel furnituire as per the following steps:- (a) Denting of bent surfaces with the help of hammer in best workmanship manner. (b) Removing old paint by scrubbing with sand paper 150 No thoroughly. (c) Applying one coat of metal primer. (d) Applying metal putty to even surface.wait period 2-3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No and paper and spraying little amount of water simultaneously. (e) Wipe the surface with solt dry cloth and apply one coat of enamel paint of light shade as approved by GE.

Almirah large steel with shelves. FD-1031/67

Almirah small steel with shelves. FD-1032/243

Locker bed side steel. FD-1029

Almirah large steel with glazed door. FD-104(M)

Rack adjustable stelel 6 tier FD/106/M

SOFA SET

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 3 piece of 5 seater set and supply and fixing new 100mm thick & 50 density of (size 21" x 21" 4") for seat cushion, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg.

All as per item No 2.10 above but sofa single chair of 5 seater.

M&L for preparation of old/new sofa set 3 piece of 5 seater set and polishing of high gloss french polish of sofa set 3 piece of 5 seater set complete all as specified & directed.

M&L for preparation of old/new sofa single chair of 5 seater set and polishing of high gloss french polish of sofa single chair of 5 seater set complete all as specified & directed.

SOFA SET FIVE SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 5 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg.

M&L for preparation of old/new sofa single chair of 5 seater set and polishing of high gloss melamine polish of sofa single chair of 5 seater set complete all as specified & directed.

CHAIR DINING CUSHIONED (MAP) FD/MAP/I/04

Removing of old unserviceableb cushion seat of chair dining (MAP) and supply and fixing new cushioned seat of chair dining (MAP) cushioned seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75mm x 75mm x 25mm teak wood stoppers, stoppers to be fixed at four corners of main frame of chair complete all as specified & directed and as shown in drg.

M&L for preparation of old/new chair dining cushioned (MAP) and polishing of high gloss french polish of chair dining cushioned (MAP) complete all as specified & directed.

Revolving Chair Geeken, TP, FD/E6/MAP/01

Removing old unserviceable Seat of Revolving chair and supply & fixing New seat of computer chair all as per drawing. Seat shall be made of 50 mm thick synthetic foam of 32 density fixed over 12 mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable back of Revolving chair and supply & fixing new back of computer chair all as per drawing . Back shall be 25 mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable cover cloth of (seat and back) from existing Revolving chairs. S & F of new fabric cloth duly approved by GE, shall be used for seat and back of existing chair computer as specified and directed.

Removing old unserviceable Arms rest of Revolving chair and supply & fixing new arms rest of computer chair all as per drawing and directed. Note : Arm Rest shall be polyurethene "D" shape.

Removing old unserviceable Revolving wheels of revolving chair and supply & fixing New Revolving Wheel of computer chair all as per drawing and directed

Removing old unserviceable padestal Assembly and supply & fixing New Steel Padestal Assembly of Revolving Chair all as per drawing and directed.

Removing old unserviceable Hydroclic System gas lift (Air soft) and supply & fixing of New Hydrolic System (Air Soft) of Revolving chair all as per drawing and directed.

Material and labour for preparing of old/new polished wood based furniture articles as per the following steps:- Step 1 Sanding:- The wood components shall be rubbed with sand paper No 120 along the grains to remove any dust/ wax/unwanted stains from the surface, the sanding will be repeated with sand paper between 180-220 grit in order to achieve the smooth surface and the wood will be wiped clean with soft clean cloth complete all as specified and directed. Steps 2 : Staining : Any cracks or holes shall be filled with wood filler of good quality. After the wood filler has dried completly sanding with a stain of approved shade will be then applied to the prepared surface with the help of a soft malmal cloth or brush along the grain'. two to three coats of staining will be done letting the stain dry completly between each coats and sanding every time very fine grit sand paper (220-320). NOTE: Excess stain should be wiped off before drying and getting absorbed in wood. Step 3 Polishing : Wood will be finished with a good quality french polish (mixture of shellac grains and methylated spirit in ratio 1:10) two to three coats shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required, Polish shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed.

Table dining 04/06 person FD-273, FD-/MAP/-II/03

Table dining 8 person FD-273/239

Teapoy FD-34

Table writing FD-275/249

Table 3'x2' with drawer FD-283/224

Table 3'x2' without drawer FD-284/223

Table dressing ladies with mirror FD-251

Sofa 3 piece 5 seater FD-281/258

Peg Table FD-277

Side board FD-272

Chair writing FD-280/250

Chair easy FD-229/DB-3960

Chair dining FD-279/228

Table center FD-277

CHAIR WRITNG/EXECUTIVE OFFICER FD/E6/MAP/12

Removing old unserviceable Seat of chair writing/Executive offr and supply & fixing New seat of chair writng offr all as per drawing. Seat shall be made of 50 mm thick synthetic foam of 32 density fixed over 12 mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable back of chair writing / Executive offr and supply & fixing new back of chair writing offr all as per drawing . Back shall be 25 mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable cover cloth of (seat and back) from existing chair writing / Executive offr. S & F of new fabric cloth duly approved by GE, shall be used for seat and back of existing chair computer as specified and directed.

Removing old unserviceable Arms rest of chair writing/Executive offr and supply & fixing new arms rest of computer chair all as per drawing and directed. Note : Arm Rest shall be polyurethene "D" shape.

M&L for gas welding to frame of chair writing / Executive offr including preparation of surface and removing the unwanted welding spot complete all as specified and directed.

TABLE COMPUTER FD/E6/MAP/03, TP

Removing Old unserviceable top 18 mm thick prelaminated particles board exterior grade and supply & fixing new top including PVC beading all round as per drawing and directed-

Removing old unserviceable sides 18 mm thick prelaminated particle board exterior grade and supply & fixing new sides including PVC beading all round as per drawing and all as directed

Removing old unserviceable bottom shelf 18 mm thick prelaminated particle board exterior grade and supply & fixing new bottom shelf including PVC beading all round as per drawing and all as directed

Removing old unserviceablepull out tray 18 mm thick prelaminated particle board exterior grade ,S&F new pull out tray including PVC beading all round & telescopic channel as per drawing and all as directed.

Removing old unserviceable drawer 18 mm thick prelaminated particles board exterior grade and supply & fixing new drawer including PVC beading all round and telescopic channel as per drawing and all as directed .

Removing old unserviceable key board tray 18 mm thick prelaminated particle board exterior grade and S&F new key board tray including PVC beading all roun telescopic channel as per drawing and all as directed.

Removing old unserviceable 25x50 mm rectangular PVC leg cover and supply & fix new PVC cover made to shape as per drawing and all as directed.

Removing old unserviceable nylon buffers /screwed base buffers and S&F new nylon buffers as per drawing and all as directed.

BED HARD STEEL FD/E6/MAP/08(R)

Supply and fixing new 18mm thick both sides prelaminated particle board BWR exterior grade confirming to IS in replacement of UNSV 18mm thick both sides pre-laminated particle board of BWR exterior grade confirming to relevant IS shade /colour as approved with PVC edging screwed to MS strip of head board all as per drawing.

Supply and fixing new 18mm thick both sides prelaminated particle board BWR exterior grade confirming to IS in replacement of UNSV 18mm thick both sides pre-laminated particle board of BWR exterior grade confirming to relevant IS shade /colour as approved with PVC edging screwed to MS strip of foot board all as per drawing

Supply and fixing in replacement of 20 mm x45mm of 18 gauge MS Strip with new of same size & thickness (including necessaary Welding) all as per drawing and as directed.

M & L for fixing (only) of long rails (including necessary welding /Nut& bolts) to head board and foot board as direceted.

Supply and fixing in replacement of old unserviceable stiffener with new of size 1974x824 mm (including welding ) made of 25 mm x25mm square MS pipe (18 gauge) all as per drawing and as directed.

Supply and fixing 12 mm tick plywood BWR grade type A ,confirming to IS-303 of 1975 (ISI marked) in replacement of old unserviceable 12 mm thick plywood BWR grade type 'A' confirmimg to IS-303 of 1975 (ISI marked) all s per drawing

Supply and fixing in replacement of old unserviceable hard rubber shoes with new of size 38mmx38mm (Inner size) all as per drawing)

M & L for painting to frame of bed hard steel with two coats of synthetic enamel black paints including welding where required and preparation of surfaces all as directed

Charpoy Hard Top (FD/MAP-II/01)

Supply and fixing of stiffener (including welding) made of 25 mm square MS pipe (16 gauge) in replacement of old unserviceable stiffener all as per drawing and as directed.

Supply and fixing of 12 mm thick plywood BWR grade type 'A' of size 1930x850mm confirming to IS -303 of 1975 (ISI marked) in replacement of old unserviceable plywood all as per drawing.

Supply and fixing of thick hard rubber shoes of size 32 mm square (Inner size) in replacement of unserviceable hard rubber shoe all as per drawing.

M&L for painting of frame of charpoy with hard top with two coats of synthetic enamel black paints including welding where required and preparation of surfaces

Revolving (Leather Chair) TP

Removing old unserviceable Seat of Revolving (Leather Chair) and supply & fixing New seat of computer chair all as per drawing. Seat shall be made of 50 mm thick synthetic foam of 32 density fixed over 12 mm thick plywood commercial and shall be stitched with superior quality leather of approved as specified and directed.

Removing old unserviceable back of Revolving (Leather chair) and supply & fixing new back of computer chair all as per drawing . Back shall be 25 mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality leather of approved as specified and directed.

Removing old unserviceable leather of (seat and back) from existing Revolving (Leather Chair). S & F of new leather duly approved by GE, shall be used for seat and back of existing chair revolving as specified and directed.

Removing old unserviceable Arms rest of Revolving(Leather Chair) and supply & fixing new arms rest of computer chair all as per drawing and directed.

Removing old unserviceable Revolving wheels of revolving (Leather Chair) and supply & fixing New Revolving Wheel of revolving chair all as per drawing and directed

Removing old unserviceable padestal Assembly and supply & fixing New Steel Padestal Assembly of Revolving (Leather Chair) all as per drawing and directed.

Removing old unserviceable Hydroclic System gas lift (Air soft) and supply & fixing of New Hydrolic System (Air Soft) of Revolving (Leather Chair) all as per drawing and directed.

CHAIR CBA OFFICE STEEL WITH ARMS FD-75(M):-

Dismantling of existing UNSV seat of chair CB office steel with arms and supply and fixing new seat of teak wood duly canning with plastic cane 2mm wide half round providing 3mm wide flat cane border around the seat and french polishing in black Colour on wooden surface all as approved by Engr-in-Charge and as specified and shown in drg canning shall be done in Godrej pattern

All as per item No. 12.01 above but back of chair

Dismantling of existing UNSV broken cleats and supply and fixing of new MS flat Iron 25x3mm and 535mm long two Nos by welding all as directed and specified and shown in drg.

Removing of Old/UNSV armrest and supply and fixing new arms rest of seasoned teak wood duly french polish in black colour etc all as approved by Engr-in-Charge and as specified and shown in drg.

Repainting of steel frame with one coat of OG synthic enamel paint after scrapping/cleaning surface by sand paper for smooth painting as directed

Supply and fixing PVC new Plug of approved quality to chair tubler steel after removing existing UNSV.

BED PLY TOP FD-246 :-

Removing of old unserviceable head board plywood of bed ply top (both face) and re-fixing of new plywood 3mm thick complete all as specified & directed and as shown in drg.

Removing of old unserviceable foot board plywood of bed ply top (both face) and re-fixing of new plywood 3mm thick complete all as specified & directed and as shown in drg.

Removing of old unserviceable long rail size 35mm x 90mm of bed ply top and refixing of new first class hard teak wood long rail of size 35mm x 90mm complete all as specified & directed and as shown in drg.

Removing of old unserviceable short rail size 60mm x 60mm of bed ply top and refixing of new first class hard teak wood long rail of size 60mm x 60mm complete all as specified & directed and as shown in drg.

Removing of old unserviceable stiffner rail between to long rails size 40mm x 60mm of bed ply top and re-fixing of new first class hard teak wood stiffeners rail size 40mm x 60mm, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable bend to right angle MS flat iron of bed ply top and re-fixing of new MS flat iron size 35 x 5mm bend to right fixed to corner of bed ply top including preparation of new iron surface and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

Removing of old unserviceable plywood of bed ply top and re-fixing of new best quality commercial type plywood 12mm thick complete all as specified & directed and as shown in drg.

M&L for preparation of old/new plywood of bed ply top and polishing of high gloss french polish of bed ply top complete all as specified & directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 60,770.00]

Budget Furniture Industries

SARGAM ENTERPRISES

dhanshree enterprises

H.M Traders

Mahesh Traders

Apsara Industries

Bidder Name

Mahesh Traders

NIHAL ENTERPRISES

dhanshree enterprises

H.M Traders

Apsara Industries

SARGAM ENTERPRISES

Budget Furniture Industries