ADDITION/ ALTERATION/ UPGRADATION TO OFFRS/JCOs/OR MD ACCN IN SHAHJAHANPUR CANTT

Amount

BLDG WORK

Taking down cement plaster of any description/any thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed

Roughening surfaces of old concrete floor/ terrazo floor/dado by power tool, hacking, picking, sweeping, cleaning and washing down with water to remove dust etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any postion below or above ground level complete all as specified and directed.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and similar work carefully and matching to adjoining disturbed surfaces complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Taking down chowkats or frames area not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Dismantling of 100mm bore cast iron/ pvc drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 75mm bore cast iron / pvc drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and directed.

Removing excavated soil material n. exc. 50 mtr and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed.

Taking down wooden shutters of area 6 Sqm and n. exc. 10 Sqm complete neccessary fittings required complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 as in sunken sub base of floor fillings using 40mm graded stone aggregate complete all as specified and directed.

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M&L for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M & L for 7 to 8 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.complete all as specified and directed.

M&L for Ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for ceramic floor tiles 8 to 9 mm thick (square / rectangular) area of each tiles exc 0.35 sqm but not exceeding 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for ceramic tiles 8 to 9 mm thick (square / rectangular )area of each tiles exc 0.35 sqm but not exceeding 0.42 Sqm in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles incl 10 mm thk cement plaster 1:4 backing coat, complete all as specified and directed.

M&L for vitrified ceremic tiles 8 to 9 mm thick, as approved by GE dark shade / double charged tiles (Square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles as approved by GE dark shade/ double charged tiles 8 to 9 mm thick (square/ rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L 20-22mm thick machine cut kota stone slab size exc 0.16 sqm(table rubbed and polished) as in flooring laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing including full round bull nosing complete all as specified and directed.

M&L for Machine cut pre polished kota stone slab 20-22 mm thick as in riser and steps, skirting in full length in single piece of stair width laid over cement screed and jointed with rubbing and treating the surface incl full round bull nosing edging and groove cutting in double line complete all as specified and directed.

M&L for 20-22 mm thick Granite of any colour (table rubbed and polished) as in windows cill & cooking platforms and like fixed in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed. (Make Nitco, Jindal Concrete Udyog, M/s Mehatab tiles)

M&L for precast machine pressesd glazed Kerb stone rubber moulded PCC (1:2:4) type B0 using 12.5 mm graded stone aggregrate, including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone complete all as specified and directed. (Make: Nitco tiles , Jindal Concrete Udyog, M/s Mehatab tiles)

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified and directed. (Note - Reinforcement to be measured and paid under respective items)

M&L for form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified and directed.

Supply and fixing TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar (1:4), over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note : Water proofing liquid shall be measured and paid separately)

Supply only Integral water proofing Liquid. (Make - Dr fixit/Fosroc/Bostik)

M&L for brick work with old size burnt clay bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for brick work with old size burnt clay bricks, built in CM (1:4) in half brick thick walls complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick/masonry wall surfaces finished even and fair without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layer of 10 mm thick in CM (1:6) and second layer of 5 mm thick in CM (1:4) with mixing of water proofing compound @150 ml / bag of cement complete all as specified and directed. Note:- Water Proofing liquid shall be measured and paid seprately.

M&L for rendering 5 mm thick in CM 1:3 as on concerete surface of ceilings finished even and smooth without using extra cement complete all as specified and directed.

Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate with using Dr fixit pidilite LW(+) , of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.30 Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with two coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

-ditto as per item no 49 as above but except two coat of aluminium paint complete all as specified and directed.

M & L for cool roof antislip tiles 300x300x10 mm with high SRI value not less than 90 laid over existing treatment on accessible roof and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. (Make : Johnson/ Nitco/ Orient Bell/ Kajaria)

S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

M&L for PCC 1:3:6 (nominal mix) type C-0 using 12.5 mm graded stone aggregate as in filling hollow of preesed steel door frame complete all as specified and directed..

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved by GE, fixed with approved adhesives as per manufacturer's instructions complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- Supply only of Glass/gauge shall be measured and paid for separately)

Preparation of new wood and wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed..

S & F 150 mm long floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F factory made fiber glass reinforced plastic (FRP) Door frames having three legged of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminate doorframe molded with fire retardant grade unsaturated polyester resin. Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiberglass from all side. MS stay shall be provided at the bottom to steady the frame confirming to IS:14856 complete all as specified and directed. Make : Fiber ways, Rajshri, M/s Kumar Arch Tech Ltd.

S & F for factory made 30 mm thick fiberglass reinforced plastic (FRP) flush shutter in required colour made with fire retardant grade unsaturated polyester resin moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PIE) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically, with testing parameters of FRP laminate confirming to table 3 of IS:14856 : 2000,complete all as specified and directed. Make : Fiber ways, Rajshri, M/s Kumar Arch Tech Ltd

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding confirming to FE-290 grade E-165 complete all as specified and directed.

S & F for powder coated composite window with double shutter for glazed and gauzed side in one pressed steel frame including stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and 5 mm thick glass with complete all as specified and shown on Drg No TD-88 sh 1/2 and 2/2 Note :- Measurements shall be taken and paid compositely for frame, glazed and gauged. Grill shall be measured & paid separately.

S&F for powder coated composite ventilator with top hung shutter for glazed and gauzed side in one pressed steel frame including stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and 5 mm thick figured glass complete all as specified and shown on drg No TD-88 sh 1/2 and 2/2. Note :- Measurements shall be taken and paid compositely for frame, glazed and gauged. Grill shall be measured & paid separately.

S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clipsa, frame made with aluminium section as appended below- (i) Window frame :45.2x35mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S & F for powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminum beading, clips. Frame made with powder coated aluminium section of size as appended below : (i) Frame : 45.2mm x 35mm x 1.15mm (ii) Aluminium beading - 0.7 mm thick (iii) Glass louvers depth 6 inch. Blade Angle : 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium necessary fittings complete as required. (v) Making good of wall surfaces with silicon to match existing surfaces complete all as specified and directed.

S&F powder coated aluminium sliding windows and frame with movable shutter (sliding on minimum two PVC roller of best quality) on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :45.2x35mm X 1.15 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick fixed with 3 mm thick aluminium composite panel into the wall for kitchen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, PVC beadings fixed with adhesive on edging , design as per site requirements basis, complete all as specified and directed.

S&F for Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container including frame work , telescopic channels , handles etc as reqd & complete all as specified and as directed, utensils sample , design & pattern of each basket to be approved by GE of following size in each kitchen :- (a) plain basket of size 510x470x100mm or 520x485x100 mm or 486X500X100mm -01Nos Make:-Sleek Elnora(Asian Paint) code 600, size 530x505x150mm/ Godrej Code 6126 baan code LKY2PB214/Evershine size 520x485x90mm (b) multi size plate basket of size 510x470x150mm or 520x485x150 mm or 436 x 500 x200 mm (clear depth 500 mm) -01 Nos. Make:- Sleek Elnora (Asian Paint) code 600, size 530x505x100)mm/ Godrej product code 6159, baan code LKY3CS214/Evershine size 520x485x90mm (c) cutlery basket,with perforated bottom & side of compacted /slots for holding cutlery of size 510x470x100mm or 520x485x100 mm or 144x 468 x50mm ( clear depth 500 mm) -01Nos Make:- Sleek Elnora ( Asian Paint) Code 600, size 530x505x100 mm/ Godrej product code 6134 baan code LKY2PC214/Evershine size 520x485x95mm (d) Plain basket of size 510x470x200mm or 520x485x200 mm or 486x500x200 mm -02 Nos, Make:-Sleek Elnora(Asian paint) Code 600, size 530x505x200 mm/Godrej product code 6128, baan code LKY2PB218 /Evershine size 520x485x180 mm.

(e) Pull out with 02 baskets each of size 150x485x80mm or 100x485x80 mm -01 Nos Make:- Sleek Elnora (Asian paint) code 250 size 180x500x590mm/Godrej product code No 6141,Baan code LKYNS2SP6/ Evershine size 610x485x90 mm. (f) Dust bin as required -01 Nos Make:- 200 series of Hettich order No 9210444)/Sleek Elnora (Asian Paint) elnora grade SS 304/Evershine size 250x 145 mm. (g) Telescopic channels, handels etc as required complete all as specified and as directed. Make:- Hettich cat No KA 4620 /Kaff code No SKU BTP 20/Godrej soft closing drawn channel 500(20'' product code-7087, Ban code LKYGTSC20/Evershine telescopic channel 20'zinc Code- HICH1359 as reqd incl frame work handles etc as reqd & all as spd, sample & design as approved by GE. Note:- Sample and design to be approved by GE.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F 200 mm long Stainless Steel glossy finish handles with SS screw, complete all as specified and directed.

S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm size aluminium handles, cast type anodised complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight stainless steel colled rolled complete all as specified and directed.

S&F 300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame fixed in repair complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for 18 mm thick WPC solid board, both side prelaminated one side with decorative choice lamination, and other side plain white lamination, as in cupboard shutter frame & cupboard shutters, with wardrobe/ finch lock & PVC lipping on all exposed edges of same texture/ shade, complete all as specified and directed. Note:1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Frame shall be 100 mm in width and shall be provided along the complete opening including the base. 3) Frame to be fixed to walls, soffits & base of cupboard with SS fasterners. 4) Area shall be measured flat on face of cupboard. (Make - Floresta Hybrid / Alstone Hybrid / Ecoste Hybrid)

S&F for factory made 18 mm thick WPC solid board as in cupboard shelves, partitions, sides of cupboard & drawers with collapsible handle & with wardrobe/ finch lock, including powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastener, also including PVC limping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. (WPC board Makes - Floresta Hybrid / Alstone Hybrid / Ecoste Hybrid) Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Telescopic channels shall be of Make:- Hettich cat No KA 4620 /Kaff code No SKU BTP 20/Godrej soft closing drawn channel 500(20'' product code-7087, Ban code LKYGTSC20/Evershine telescopic channel 20 zinc Code- HICH1359.

S&F for 9 mm thick WPC solid board with plain white lamination, fixed on back side of wall of cupboard with SS fasteners complete all as specified and directed. (Make - Floresta Hybrid / Alstone Hybrid / Ecoste Hybrid)

S & F 125 mm brass hasp and staple including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F rotational moulded polythene water storage tank Triple Layer white colour Cylindrical vertical with closed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified and directed Incl dismantling of existing tank. (Make - Sintex / Plasto / Supreme)

Taking down existing RCC water tank of 500 ltr to 1000 ltr capacity including staging/supporting of RCC/any other material complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank Triple Layer white colour (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified and directed Incl dismantling of existing tank. (Make - Sintex / Plasto / Supreme)

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, Ceiling,Floor, etc.) 15mm bore complete all as specified and directed.

S&F 20 mm dia steel water tubing, galvanized, medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, Ceiling,Floor, etc.) 20mm bore complete all as specified and directed.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets complete all as specified and directed. Model : Cat No 10072 Neptune of Hindware , Parryware Cat No C 8826 , Cera Cat No S 2040102

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 02 Nos 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets complete all as specified and directed. Model : Cat No 10072 Neptune of Hindware , Parryware Cat No C 8826 , Cera Cat No S 2040102

S&F in repairs vitreous chinaware wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. Model : - Cat No 10072 Neptune of Hindware , Ped 11029, Parryware Cat No C0480 (SP) 181/CTH , C 0375 pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 WHB.

S&F in repairs Vitreous China table top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed. Model : Cat No 91072 Orchid of Hindware , Parryware Cat No C0483, Cera Cat No FLS-WHT-0575

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. Model : model of Hindware Cat No F110019, Cat No FUS-29281 Fusion of Jaquar , Parryware Cat No G0217A1.

S&F in repairs Brass chromium plated wall mixer 2 in 1 , 15mm for mixing hot & cold water, screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. Model : Hindware Cat No F110018 ,Cat No FUS - 29273 UPR of Jaquar, Parryware Cat No G0216A1

S&F in repair fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as specified and directed.

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified and directed. Make : Hindware model No F 840009, Jaquar Model No :- ACN-1153N,, Parryware model No T6514A1

S & F in repair fancy type 150mm size square brass CP shower rose complete all as specified and directed. Make : Hindware Model No F160006, Cera Model No: F 7010305 of , Parryware Model No T9985 A1

S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed. Make : Model Hindware Cat No-F110002, Model : FUS 29037 Fusion of Jaquar, Parryware model No G2304A1

S&F in repair fancy type 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified and directed. Make : Hindware Model No F110035 , Model :ARI 39001B Aria of Jaquar, Cera Model No F2013451

S&F in repair fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe 2 Way Bib Cock with Wall Flange complete all as specified and directed. Make : Model Hindware Cat No- F110003, 'Model: FUS 29041 Fusion of Jaquar ,Parryware model No G2381A1

S&F stainless steel of AE - SI 316 grade tubular towel ring including a pair of CP brass bracket complete all as specified and directed. Make : Hindware Model No F840008, Model No ACN 1121N Jaquar, Parryware Model No T/6002A1.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm, complete all as specified and directed..

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. Make : Hindware Model No F110004, Model : ARI -39053 of Jaquar, Parryware Model No G4907A1

S&F in repair fancy type stainless steel towel rack size 600mm X 300mm including a pair of brass bracket complete all as specified and directed. Make : Hindware Model No F840010, Model No :- ACN -1181N of Jaguar ,Parryware Model No T6008A1, Cera Model No F5003102

S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed. Make : Model: ACN - 1173 of Jaquar , Parryware Model No T6010A1, Cera Model No F505101

S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (concealed type) for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed. (Make Hindware / parryware /Cera)

S&F in repair vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. Model :- Model Popular Cat No. 20044 starwhite (including seat cover) of Hindware,CNS-WHT-WH-10(seat), CNS-WHT-WCN1 (seat cover) Jaquar , Parryware Model C 0297(seat) & E-8071 (seat cover)

S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. Model :- Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32 , Parryware Cat No 8177*, Cera Cat No B1810110 fittings snow white.

S & F in repair Brass CP health faucet with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook screwed for iron pipe fancy type long body complete all as specified and directed. Make : Hindware Model No F160001, Model :- ALD 573 of Jaquar, Parryware Model No T9961A1

S & F Brass CP Hand Shower with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook screwed for iron pipe fancy type long body complete all as specified and directed. Model No :- Hindware Model No F160053, HSH-1931 of Jaquar, Parryware Model No T9982A1

S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plate rack, complete all as specified and directed.

S&F in repair for 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc complete all as specified and as directed. Model :- Cera Cat No B 4711501- satin finish series alma , Parryware Cat No C857281, Kaff Cat No KS610SB (R10) Marco series.

S & F in repair for 0.8 mm thick stainless steel in graceful glory range ,anti scratch, satin finish of popular range kitchen sink over all size 990x459mm , double bowl size 400x340xx200 mm incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed. Model : Cat No C 857081 of Parryware, Cera Cat No B 4513201, Kaff Cat No KS610 SB (R10).

S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type drapery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed.

M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.

M & L for Post Construction anti termite Treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M & L for Post Construction anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.

S&F Pre-coated Mangalore pattern galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. Make : Tata blue scope / JSW

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 part cement and 3.5 part of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing FE 290 Gde E-165 complete all as specified and directed.

S & F 1.25 mm thick Mild steel, plain black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete including cutting out of existing sheet if required complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for complete removal of existing treatment and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1-1.5 mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of manufacturer complete all as specified and directed. Make : Royale luxury emulsion shine distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper.

M&L for two coat OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over over two coats of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1-1.5 mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of manufacturer complete all as specified and directed. Make : Royale luxary emulsion shine distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper.

M&L for for complete removal of existing treatment and applying of two coat OBD on ceiling with airless electric sprayers over 1 mm coat of wall care putty prepared and sanded with electrically operated sanding machine including complete removal of old finishes, preparation of surface . Application to be done through authorised dealer. Make : Royale luxary emulsion shine distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of 1mm thick cement based wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

S&F in repair 20mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and directed.

Fencing

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 mtr complete all as specified and directed.

M&L for cement concrete in foundation type C 2, 1:3:6 ( 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

S&F rolled mild steel in joist , channel, angle or tie sections fixed independently without connecting plates etc (cut to ordinary length i.e. within 20 mm of the length indicated) as in posts and struts in fencing including cutting tops to shape as directed , drilling holes , notching for wire etc ,flat iron fillets ( for securing wire etc ) including all necessary drilling , bolting or riveting, etc and similar work , MS flat iron of any size etc complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply only mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square at one end and screwed the other ends and fitted with washers and one hexagonal or square nut exc 5 cm but not 10 cm long complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F chain link MS galvanised fencing, 4mm dia wire and size of mesh 100x100mm x 3.15mm including line wires to any type of standard rails, straining bolts, nut & bolt for angle iron post MS tie bars incl provisioning of binding wire etc complete all as specified and directed.

Supply only mild steel round bars in available length of Fe-290 (Gde E-165) complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M & L for rendering 10mm thick on brick wall or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed.

M & L for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc complete all as specified and directed.

Taking down carefully old unserviceable fittings & Fixers of any type and any size complete all as specified and directed.

Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity complete all as specified and directed. Note : - Serviceable MCB DB incl MCB will be reused.

Taking down carefully old unserviceable sub main wiring of any size complete all as specified and directed.

M&L for Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly complete all as specified and directed.

(a). One light point controlled by one switch

(b). One fan point controlled by one switch

(c). One exhaust fan point controlled by one switch

(d). One 3-pin socket outlet 5 Amp on independent board.

(e). One 3 pin socket outlet 5 Amp on same board

(f). One light point controlled by two way switches

(g). One bell point controlled by one switch

All as per Srl item No. 168 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified and directed for One 3 pin socket outlet 15 Amp on independent board.

M&L for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified and directed. Note : Three run of 6.0 Sqmm copper cable and one run of conduit shall be measured as one unit.

M&L for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 10 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size10 sqmm as an earth continuity conductor complete all as specified and directed. Note : Three run of 10.0 Sqmm copper cable and one run of conduit shall be measured as one unit.

M&L for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified and directed. Note : Three run of 4.0 Sqmm copper cable and one run of conduit shall be measured as one unit.

S&F switch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed.

Supply and fix in replacement two way 5 amps, 230 volts, complete all as specified and directed.

S&F switch piano flush type polycarbonate SP one way 15 Amps complete all as specified and directed.

S&F bell push piano flush type 5 amp single pole one way complete all as specified and directed.

S&F socket outlet 3 pin 5 amp multipurpose flash type complete all as specified and directed.

S&F socket outlet 3 pin 5/15 Amp multipurpose, flush type 240 volt complete all as specified and directed.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete all as specified and directed.

S&F bell ding dong type AC 230 volt single pole complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and directed.

Supply and fixing LED bulb 9 watt including connection complete all as specified and directed.

M & L for replacement of socket type electronic fan regulator switch type 180 volts on the existing phenolic laminated sheet etc as required complete all as specified and directed. Make :- Havells, Phillips, Crompton.

Taking down fan of any size, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed.

Hanging only ceiling fans of any sweep received from item Sl No 191 after minor repair by replacement of parts such as capacitor, connector, pins, rubber reel, nut bolts with washers and oiling greasing, cleaning including spray painting and rewriting MES No. complete all as specified and directed

Taking down and Refixing exhaust fan any size and connecting up including provision of cable from ceiling rose/connector to fan.

S&F MCB SP 5-40 Amps 10 KA C series complete all as specified and directed.

S&F MCB SPN 40 Amps 10 KA C series complete all as specified and directed.

S&F in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and directed.

Taking down Existing 8 way DB and Refixing the Same carefully complete all as specified and directed.

S&F Decorative box type LED light fitting suitable for 4 ft T8 -20 watt with blue colored end 20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells Cat part No REGAL BATTEN8 UP TO 01X22WDSBSWH/ Philips Cat part No- BN108CLED20SPSUCDLWH/Surya Roshni Cat part No-20WG-LINEECO

Taking down old unserviceable bldg security light fitting, Supply and fixing new LED bldg security light fitting 35/36 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and directed. Make –Philips cat part No BRP409LEDCW036MRFGSIPSUGR/ Make - Surya Roshni Cat Part No - SLEUL36WIP66LXN/ Make – Havells cat part No – SL35WLED757SASYBOPC

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc complete all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I).

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and directed.

Supply and fix decorative light fitting 1x9watt ceiling/wall mounted LED BULKHEAD luminaire with engineering plastic housing and top frame with opal PMMA diffuser complete all as specified and directed. Make – Havells cat part No – LHEXCGP7IN5W013, Make – Surya Roshni Cat part No – SLEBLH10W/ Make – Philips Cat part No-HEXAFTWLED857SSYMBOPC

Supply and fix in replacement wall mounted light fitting with accessories including 9 watt LED bulb complete all as specified and directed. Make – Havells cat part No – LHDL03160099/ Surya Roshni/ Philips

Supply & fix fans ceiling 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and directed.

S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified and directed.

S&F MCCB 4 pole 63 Amps 16 KA complete all as specified and directed.

S&F MCCB 4 pole 40 Amps 10 KA complete all as specified and directed.

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 16 sqmm 4 core complete all as specified and directed.

M& L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for laying bricks, sub class 'B' for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed.

Taking down faulty damaged unserviceable LT under ground cable of any size complete all as specified and directed.

Taking down existing energy meter by disconnecting electric connection of any type ,any make ,any capacity in poly carbonate or sheet steel body, ISI marked ,50 Hz 240 volts AC single phase rating etc.complete all as specified and directed.

Refixing existing energy meter by disconnecting electric connection of any type ,any make ,any capacity in poly carbonate or sheet steel body, ISI marked ,50 Hz 240 volts AC single phase rating etc. complete all as specified and directed.

S & F in replacement mirror LED light fitting 2 feet 10 watt with accessories complete all as specified and directed. Make - Havells cat part No – LHEXACP5IN1W010/ Make – Surya Roshni Cat part No – SLEBTNT810W/ Make – Philips Cat part No-BN021LED10S-6500PSUGRS1

S&F Geyser 25 Ltrs capacity 240 volt AC BEE 5 star rated including making connection complete all as specified and directed. Make - Havells cat part No – GHWASESWH025, Make - JAQUAR Cat part No – ERICA Vertical (Manual) / Make -V Guard Cat part No- Steamer plus MSV25

M&L glazed ceremic tiles in vertical surfaces 300x200x 6 to 7 mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M & L for PVC conduit medium grade 20 mm dia including concealed in wall and its necessary fittings and accessories complete all as specified and as directed.

S & F for TV socket and including sunk cast iron 1.6 mm thick pressed steel terminal box and mounting of hylem sheet its necessary fittings and accessories complete all as specified and as directed.

Note : Tenderers may note that amount of credit Rs 2,72,145.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/s DS Enterprises