Special Repair for Library at Punjab Vidhan Sabha

Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.

Providing and fixing wooden Door Profile complete in all respect

Providing and fixing ply wood, plain lining,butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) (a) 4mm thick 3 ply decorative ply wood with teak faced on one side

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Melamine polish two or more coats to give required finish including one coat of wood filler

Providing and fixing of HDHMR Board including gittis,screws as per site requirement complete in all respect (i) 12 mm thickness

Providing and fixing of HDHMR Board including gittis,screws as per site requirement complete in all respect (i) 18 mm thickness

Providing and Fixing ceiling at height upto 4 Mtr. consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and tothe entire satisfaction of engineer-in- charge.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge

Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead (a) With cement mortar 1:4 (1 cement:4 sand) Taking area 2.5 sqm

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface.

Providing and fixing of wooden partition of 4mm thick teak ply over 9 mm thick commercial ply with wooden frame of 2" x 2" batten made of kail wood including melamine polish, as per design complete in all respect.polish, as per design complete in all respect.

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (iv) 8.0mm thick Plate glass(weight not less than 20 kg/ sqm)

Providing & fixing Antique Brass Tower Bolts size 6" i/c screws etc complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing Antique Brass Tower Bolts size 8" i/c screws etc complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing Antique Brass hinges size 5 " i/c screws etc complete in all respect as per the directions of Engineer-in-charge.

Providing and fixing of Antique brass Door Closer i/c screws etc complete in all respect

Providing and fixing of Antique brass Door Stopper i/c screws etc complete in all respect

Providing & fixing Antique Brass door handle size 6" i/c screws etc complete in all respect as per the directions of Engineer-in-charge.

Providing and fixing of Antique brass Mortise lock i/c screws etc complete in all respect

Providing and fixing of Wooden cabinet of size 6.5' x 10.5 ' having 2 ' depth having Sides in form of partitions full height solid partition consisting of hollock wood frame work consisting of 3"x2" hollock wood , finished with PU paint with spray gun from outside and inside over 12 mm Commercial ply and 9 mm Commercial ply on sides complete . Hollock wood members of size 3"x2" shall be provided for framework of Cupboard wherever required for supporting the shutters of Cupboard covered with 12 mm commercial ply decorated with 4mm teak ply . The shutters of cubboard is made with teak wood having teak wood Louvers duly finished with melamine polishing (approved design) complete in all respect. The rate shall inclusive of providing and giving neat finish with PU paint with spray gun on sides from inside/outside and melamine polishing on all exposed wood surfaces/ and teak ply over battens..

Replacement of existing table Glass Top of size 6'x 3' in with new tinted glass 10 mm thick Table Top for Executive table including bevelled edges comple in all respect

Providing and supplying of New L shaped tinted glass 10mm thick Table Top for Executive table (1800x2100x750) including bevelled edges comple in all respect for Sr librarian room.

Spirit or Wax polishing (ii) Tables (area 0.5 to 1 Sqm)

Cleaning of glass panes both sides

Repair of existing Executive Table of size 6'x3' in Librarian Room including painting, replacement of Sunmica,beading, damaged plyboard whereever required including polishing etc complete in all respect

Providing and fixing of Wooden cabinet of size 9'2" x 5'-4" having depth of 1'-9" with 18 mm commercial ply, 12 mm commercial ply with 4mm teak ply including drawers, lock, telecope channels as per design complete in all respect

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Carpenter man days

Labour for Shifting of Material/Helper