CERTAIN REPAIR TO DRAIN,COMPOUND WALL,HARD STANDING, PATH, SPORTS /TRAINING AREA,RETAINING WALL,FENCING GATE ETC AT JAKLI RC, SRINAGAR UNDER GE 970 EWS.

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles, complete all as specified & directed by Engr-in-Charge.

Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 etc, complete all as specified & directed by Engr-in-Charge.

All as per srl item No 02 here-in-before but except stone complete all as specified & directed by Engr-in-Charge.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified & directed by Engr-in-Charge.

All as per srl item No 4 above but except bricks complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above Ground level) complete all as specified & directed by Engr-in-Charge.

Cement concrete type B2 1:2:4 (40mm graded aggregates) 100 mm thick as in hardstanding etc including spike rolling to surfaces or making impressions of expanded metal whilest the concrete is green,complete all as specified & directed by Engr-in-Charge.

Cement concrete type C2 1:3:6 (40mm graded aggregates) 75 mm thick as in sub base etc finished surface even without using extra cement, complete all as specified & directed by Engr-in-Charge.

S&F machine pressed precast chemical coated skid resistant chequred tiles made with white cement and color pigment, 300x300mm and 20-25 mm thickness M35 grade incl screed bed 20mm in CM (1:4) complete all as specified & directed by Engr-in-Charge.

S&F Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, incl sand cushioning 25 mm thick below paver complete all as specified & directed by Engr-in-Charge.

PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregates) as in coping work complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete.

M&L Rendering 15mm thick in Cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

Preparing new surfaces of walls & applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engr-in-Charge.

Preparation of old plastered surfaces of wall and applying two coat of cement base paint over a coat of primer incl removal of existing treatment complete all as specified & directed by Engr-in-Charge.

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified & directed by Engr-in-Charge.

Plain Cement Concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains, complete all as specified & directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc,complete all as specified & directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified & directed by Engr-in-Charge.

Excavating in Post holes(or for similar work) each n exc 0.50 cum, getting out, returing filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil incl taking out old broken RCC fencing post complete all as specified & directed by Engr-in-Charge.

M&L PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation concrete of fencing posts complete all as specified & directed by Engr-in-Charge.

S&F MS hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel bolts machine made with hexagonal or square head one end and screwed the other or screwed both ends each screw end to be fitted with washer and one hexagonal or square not nexc 5cm long, dia of neck 5 to 10mm complete all as specified & directed by Engr-in-Charge.

S & F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and strainning and fixing to any type of strandred rails strainning bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc, as directed (each line wire to be measured) all as spd and directed by Engr-in-charge.

Restrainning resecuring incl making good with staples Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)complete all as specified & directed by Engr-in-Charge.

Dismantling mild steel work of any description otherwise described complete all as specified & directed by Engr-in-Charge.

Supply of Chain link MS galvanisd fencing, any size or type complete all as specified & directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directed by Engr-in-Charge.

S&F concertina coil punch type 450/600/900 mm fixed dia on top of walls/angles/on ground etc or laid and fixed in any position incl necessary acessories & arrangement to fix the coil complete all as specified & directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.

M&L for Providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:6, as in cover slabs (for manholes, drain cover etc) with plain fair facescomplete all as specified & directed by Engr-in-Charge.

MS TMT Bar 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in strands for complete all as specified & directed by Engr-in-Charge.

M&L Providing precast cement concrete louvers and jallies made out of cement concrete type BO 1:2:4 (12.5mm graded aggregate) set in CM 1:4, 50mm thick (measured solid),including all mouldingscomplete all as specified & directed by Engr-in-Charge.

M & L for taking down rolling shutter gate of any description and size and re fixing in the same after repairing like anchoring rod , gear,hood, strips,springs any nos hinges,pivots,bearing, necessary welding, oiling ,greasing, painting,to make the gate smooth and fully functional, incl replacing of unserviceable acessories ,like MS handle,complete change of pivots into bearing complete, etc complete all as specified and directed.

Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed by Engr-in-Charge.

M&L for flush pointing, to random rubble masonary uncoarsed or brought upto coarse in CM 1:4 complete all as specified & directed by Engr-in-Charge.

M/S YATTOO CONTRACTORS

M/S CHINAR BUILDERS

M/S LATIF AHMAD BABA CONSTRUCTION

M/S GHULAM HASSAN KUCHAY

M/s Bashir Enterprises

M/S B S CONSTRUCTIONS