SPECIAL REPAIRS TO ROAD BEYOND OF 1EME CENTRE TO CDM DHURVA GATE AND SPECIAL REPAIRS TO ROAD FROM BLDG NO.J-89 TO J-83 UNDER AGE B/R (N) NO. I OF GE(N) SECUNDERABAD

Amount

Repairs to pot holes of any depth and n exc 1 Sqm each incl sweeping free from dust and mud, water scoring sunken surfaces in roads, paths etc cutting around edges at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (inc supply of premixed macadam, binder and chipping). depth of potholes exc 30mm.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a tack coat of paving bitumen primer at 5 Kgs/10 sqm all as specified and directed

Bituminous premixed semi dense asphaltic concrete, 30mm consolidated thicknes with 5.5% binder content(paving bitumen) by weight of total mix, mixed in hot mixed plant, rolled and compacted to required camber and gradient by using mechanical paver complete to be uniform surface all as specified and directed.

M&L 100mm thick(Spreaded thickness) approved moorum/red bajri for berms including spreading,levelling,watering and rolled with hand roller of .2 to .5 tonne capacity to required camber and gradient complete all as directed . Note : Moorum shall be brought from out side MD land.

M & L for painting lines, dashes, arrows, letters etc on road surfaces / over speed breakers exc 10 cm wide, with thermoplastic road marking paint, spray machine, preparing black top surface including fanning out dust and any other foreign matter complete all as specified and directed.

S&F in repairs ABS round body fitted with 2 Nos of 110mm dia highly reflective reflector made out of PMMA and having a pipe, (duly powder coated). Sponser plate can be provided for sponsership. Two small rectangular reflector of size 70x23mm, 2 Nos each side are also provided for better reflecting including necessary excavation of size (300x300x450mm) and fixed with PCC (1:3:6) all as directed

S&F solar road pavement markers ( solar stud) AK 970 of Aktion make or an equivalent in 3M / Mr. Illumination fixed on bituminous/ concrete surfaces as per manufacturer instructions complete as directed.

S & F road cat eyes of approved make pasted with the adhesive as per manufacturer instructions. Make: 3 M of series 290 C or equivalent in Mr. Illumination/ Dark eye / Aktion as approved by GE.

M&L for rubber based speed bumps of dimensions 500x420x75mm with reflective arrow stickers on both side with combination of approved colours ( black and yellow) fixed with necessary bolts etc., complete all as specified and as directed

S & F in repairs Convex Mirrior of 1000 mm Dia made of poly carbonate material fix to 100 mm dia MS Post 50mm nominal bore and of wall thickness 3.65mm conforming to IS-1161-1979 of grade St-240 of 3.0 metre long including two coats of epoxy paint, necessary earth work and excavation in post holes and PCC bed block 1:2:4 type B1 of size 450 X 450 x 600 mm,including removal of surplus soil and levelling of distrubed ground complete all specified and directed

Scarifying or picking gravelled, macadam or bituminous macadam including soling surfaces if required in area exceeding 400 Sqm and depth exceeding 50mm and not exceeding 100mm deep and removing materials from site of work or stacking for reuse at site complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam including soling surfaces if required in area not exceeding 400 Sqm and depth exceeding 50mm and not exceeding 100mm deep and removing materials from site of work or stacking for reuse at site complete all as specified and directed.

Material & labour for Screening road metal, chippings etc on the site of work, when specially ordered including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both side of screen measured for payment) complete all as specified and directed.

M&L 15cm thick ( two layers of 7.50 x2=15 cm ) (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mmsize) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required

All as per item No 14 above but except materials ( Material retrived from item No 11&12 to be reused after screening)

M&L for 150mm thick Soling (or sub base) with broken boulders orquarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and as directed

M&L for preparing WBM top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen VG-30 grade complete all as specified and directed

M&L Premix bituminous, paving bitumen any penetration laid/rolled macadam with binder content of 4% by weight of total mix using paving bitumen (VG-30)and compacted to required gradient and camber (consolidated thickness 75mm or less)

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a tack coat of paving bitumen primer at 5 Kgs/10 sqm all as specified and directed

M&L 100mm thick(Spreaded thickness) approved moorum/red bajri for berms including spreading,levelling,watering and rolled with hand roller of .2 to .5 tonne capacity to required camber and gradient complete all as directed . Note : Moorum shall be brought from out side MD land.

SAI RUPA CONSTRUCTIONS

B Sreepathy Rao & Sons

BEKKAM CONSTRUCTIONS

BSA INFRA

M/S B.SHRAVAN KUMAR

K CHANDRAPAL REDDY